Electrical Training Equipment

Three Phase Transmission Simulation

Item code: 1240
  • A self contained teaching module, ideal for class and project work.
  • Allow realistic studies of short.
  • Medium and long distance transmission lines under variable load and power factor conditions,as well as with inserted faults.
  • Fault application switch and earth fault resistors allow studies of earth fault currents and the operation of relays of varying sensitivity.
  • Enables “pi” and “tee” methods.
  • Built in industrial-standard digital protection relay gives wide range of functions.
  • Includes variable, supplies, circuit.
  • Protection, internal load banks.
  • Instruments and controls.
  • Three phase lines five sections module mimic 125 km kv and 100 mva line 132,the module rated voltage is 380 va.
  • Three phase load banks variable resistive inductive and capacitive,380 v 5 a voltage, current, power and power factors meters fault switch
  • 3d simulation & inimation with multimedia

Additional Information:
  • Item Code: 1240

Image Analyzer Software

Item code: 1281
  • Determine grain sizes using automatic grain boundary reconstruction, chord length or chart comparison. Analyze the phase distribution in samples. Determine the shape and size of graphite particles automatically compare micrographs with comparative diagrams directly on screen.
  • Compatible with windows 7 software protection((no hardware protection. Such as dongle etc.

Additional Information:
  • Item Code: 1281

Micro Hardness Measurement Software

Micro Hardness Measurement Software  ET-1234

Specification:
  • Working bench suitable for the incoming lab and suitable for only students, laboratory
  • experiments that serve the items listed .
  • Miccro-hardometer integrating the functions of optics, mechanics, electricity, computer and data processing software, used broadly in the hardness testing of the meter material and components,especially for the testing of the hardening layer’s depth of the slim metal components by the heat treatment. The micro-hardometer experiment method is the only hardness measuring method which can’t de replaced.
  • Item/type digital auto micro-hardness tester.
  • test load, the pilot of the hold time.
  • 10,25,50,100,200,300,500,1000(gf) duration of the testing force:1-99s.
  • ways of loading.
  • load and unload automatically by the electric.
  • lens magnification.
  • measurement used for measuring: 40x observed using for observe: 10x digital resolution resolution: 0.03um.

Electronics Lab Instruments

Item code: 1277
  • Working Bench suitable for the incoming lab and suitable for only students,
  • Laboratory Experiments that serve the items listed ,
  • Ac Variable Speed Drive Trainer
  • Ac Variable Speed Drive Trainer, Extended
  • Complete Electronics Lab
  • Dc Motor Speed Control
  • Mobile Motor / Generator Unit
  • Thyristor & Motor Control
  • Thyristor Control Principles
  • Thyristor Control Upgrade

Additional Information:
  • Item Code: 1277

Complete Renewable Energy Lab

Item code: 1275
  • Laboratory experiments that serve experiment:
  • An educational lab which Combines new energy
  • Solar/photovoltaic,wind hydrogen Generation and fuel cell)
  • With Conventional power systems (battery bank and grid power,230 v)
  • the lab is integrated in a rack(except Solar panels and wind turbine)and comprises of the following components
  • Solar panels(photovoltaics):1200 wp,
  • Wind generator(turbine):400 wp ,
  • Fuel cell power module(air cooled, Wp 1200
  • Battery bank:55 ah, (Electrolyser (hydrogen generator(liters/hour(optional 60)
  • Metal hydride canisters: 1500 liters
  • Hydrogen storage capacity
  • Central energy management,
  • Module Controller with monitor and Educational software
  • Solar radiation and wind sensors
  • Electronic load 1,5 kw.

Additional Information:
  • Item Code: 1275

Thyristor AC Motor Drives

Item code: 1271
  • 1,10 60 and 4 pole 220/380 v,kw
  • Hz induction drive
  • Laboratory experiments that serve the following:
  • Of each experiment
  • Induction-motor drive with voltage
  • Control
  • Wound rotor induction-motor
  • Drive with static
  • Cascade
  • 3d simulation & animation with multimedia.

Additional Information:
  • Item Code: 1271

Stepper And Switched Reluctance Motors With Their Drive

Item code: 1269
  • 1,10 step degree 6 v 220 kw
  • (stepper motor)
  • 1,10 switched 6/8 v 220 v kw
  • Reluctance motor
  • 3d simulation & animation with multimedia.

Additional Information:
  • Item Code: 1269

PWM AC Motor Drives

Item code: 1265
  • 1,10,60 and 4 pole ,220/380 v, kw
  • Hz induction drive
  • Laboratory experiments that serve the items listed.
  • Experiment:
  • Saturation and effect of frequency in magnetic
  • Circuits
  • Three phase voltage source
  • Inverter
  • Induction motor drive
  • Constant v/f ratio inverter
  • Induction-motor
  • Drive
  • 3d simulation & animation with multimedia.

Additional Information:
  • Item Code: 1265

PWM Chopper /inverter Circuits

Item code: 1257
  • All power electronics components must with stand piv and 5 a.
  • Laboratory experiments that serve the items listed.
  • A catalouge should be submitted that describe clearly the procedures and results of each experiment.
  • High power switching
  • The buck chopper
  • The boost chopper
  • The buck/bost chopper
  • The four quadrant chooper
  • The single phase invertor
  • The two phase invertor
  • The three phase inverter
  • 3d simulation & animation with multimedia

Additional Information:
  • Item Code: 1257

Diodes And Thyristor Circuits And Power Supply

Specification of Diodes and Electrical lab  

Model No 1255

We are manufacturer and Exporter of Electrical Engineering tyraining Equipment for engineering colleges.
  • Laboratory experiments that serve the items listed.
  • Power supply with at least fixed 3 phase 380 vac, fixed 220 v dc and variable.0-380 v. three phase and 0-230 v dc,5 a. the power supply must contain a center taped transformer.
  • All power electronics components piv and 5 a.

Additional Information:
  • Item Code: 1255

System To Simulate Integrated Circuits

Item code: 1250 
  • The main system capable to perform the following experiments,
  • Designing ,constructing testing .
  • And experimenting with both analog and digital circuits.
  • Fpga boards and facilities for digital prototyping digital and analog design .
  • Experience as well as the fpga
  • Based courses:-
  • Integrated circuit designs
  • Microelectronics
  • Opto electronics
  • Vlsi
  • Software for vhdl convertors from flowchart, high level language and from some other packages.
  • 3d simulation & animation with multimedia

Additional Information:
  • Item Code: 1250

Distribution Trainer

Item code: 1245  
  • Self-contained teaching module ideal for class and project work .
  • Allow investigations of radial and ring-main distribution circuits.
  • Able to examines distribution efficiency, voltage drop and voltage regulation.
  • Shows effect of line on losses and efficiency.
  • Built in industrial standard digital protection relays give wide range of functions.
  • Includes supplies circuits protection,(internal variable(r,l, and c loads instruments and controls.
  • The system simulate a distribution system 380 v,60 hz,2 kva and can be operated as a redial and ring system with tapped transformer and var compensation and verify experiments given in the notes column.
  • 3d simulation & animation with multimedia

Additional Information:
  • Item Code: 1245

Honing Stone

Special quality stone in box.

L-Moulds (Embedding Moulds)

L-Moulds (Embedding Moulds)   ET-1266

Made of brass alloy heavy duty and polished.

Size:
  • 37x25x15 mm pair.
  • 50x25x15 mm pair.
  • 75x30x19 mm pair.

Distribution Transformer Trainer

Distribution Transformer Trainer
Item code: ET-1290

OC SC TEST FOR THREE PHASE TRANSFORMER WITH PANNEL AND TRANSFORMER WITH DIGITAL PANEL METER DISPLAY.
The Distribution Transformer Trainer, Model 8361, is a portable, hands-on trainer designed to allow students to develop competence in completing single/three-phase transformer connections similar to those performed in the North American power distribution system.

The trainer contains two sets of three single-phase transformers to demonstrate three-phase banking configurations, such as wye-wye, delta-delta, closed delta-wye, closed wye-delta, open-wye, open-delta, and others. Each individual transformer winding is protected by a thermally-activated circuit breaker and designed to accept multiple faults.

The trainer is faultable in order to develop sound techniques for troubleshooting single-phase and threephase transformer banks. Eight (8) trainer faults are available.

The trainer is complete with a student laboratory manual written in a skill-building, performance-based format, allowing easy set-up of all laboratory exercises.

Features & Benefits
  • The trainer allows students to perform the following tasks:
    • Identify different types of transformers
    • Identify faulted transformers
    • Test for proper no-load voltage
    • Show how a three-phase transformer produces correct and incorrect motor rotation
    • Show how the ratio of the transformer windings affects the secondary output voltage
    • Show how to simulate parallel single-phase and threephase transformers
    • Simulate a burned-out transformer in a three-phase bank, and how to connect the remaining transformers in open-wye and open-delta configurations to produce the correct voltage
Topic Coverage
  • Distribution Transformer Trainer
  • Transformer Polarity and Terminal Markings
  • Single-Phase Transformers Supplying Single-Phase Loads
  • Single-Phase Paralleling
  • Three-Phase Banking of Single-Phase Transformers

Additional Information:
  • Item Code: ET-1290

Foundry Building-up Training Set

Item code: ET-1408

Didactic case for the study of foundry fundamentals.

Operations of ramming up of the moulding sand, melting of the metal, pouring, forming and fettling can be performed step by step.

Practice of melting, unmelting and foundry with irregular and asymmetrical patterns.

Making up a casting with cavity (pipe reduction).

Training set in a case, containing:

Aluminum cope and drag box, screwable.

Pattern plate with pattern.

Core box.

Downgate.

Small and big risers.

Shovel.

Brush.

Scrapers.

Saucepan.

Ramer.

Pencil brush.

Lancet.

Thermometer.

2 Kg. metal alloy (melting point 70°C approx.) and 6 Kg. moulding sand in a separate container.

All instruction set is supplied ready to use, including enough test material.

All material is recoverable.

Manuals:

This unit is supplied with the following manuals: Required Services, Assembly and Installation, Starting-up, Safety, Maintenance & Practices Manuals.

Dimensions: 600 x 400 x 200 mm. approx.

EXERCISES AND PRACTICAL POSSIBILITIES

1.- Study of foundry fundamentals.

2.- To manufacture of a pipe-reducing flange with cavity of 1 kg-mass approx.

3.- Practice of melting, unmelting and foundry with irregular and asymmetrical patterns.


Additional Information:
  • Item Code: ET-1408

Centrifugal Casting Building-Up Training Set

Item code:  ET-1406

This unit is designed for production of hollow bodies in a fast rotating die.

This unit is mounted on a 2mm thick steel sheet, primed and painted, and hold by a frame of extruded and anodized aluminum, which provides a great stiffness and resistance.

Three-phase motor that does 1.67A with 2700 rpm.

A variator that controls the motor. It can turn with a maximum frequency of 50Hz (which corresponds to 3000rpm approximately) and a minimum one of 10Hz. The motor turning speed can be changed from this variator. Turning anticlockwise direction.

Stainless steel cast axis with a diameter of 20 mm.

The cast is cylindrical and is made of aluminum, outer diameter of 82 mm, inner diameter of 70 mm and length of 150 mm.

The cast useless length is 110mm, once the lids have been placed.

The cast is made with a little cone-shape to make easier the extraction of piece towards the inlet side.

A small saucepan in which the tin can be heated.

A crucible from which the tin can be pour in order to the start the experiment.

2kg tin bar.

Thermometer.

All instruction set is supplied ready to use, including enough test material.

All material is recoverable.

Cables and accessories, for normal operation.
EXERCISES AND PRACTICAL POSSIBILITIES

1.- Study of foundry fundamentals.

2.- Production of hollow bodies in a fast rotating die.

3.- Centrifugal casting with different turn speeds.

4.- Centrifugal casting with different temperatures of tin.

5.- Centrifugal casting for different amounts of tin.


Additional Information:
  • Item Code: ET-1406

Bell Casting Basic Training Set

Bell Casting Basic Training Set 

Item code: ET-1410

Didactic case for the study of foundry fundamentals.

Introduction to sand casting: student experiments with 3 different patterns (bell, anvil and anchor).

Operations of ramming up of the moulding sand, melting of the metal, pouring, forming and fettling can be performed step by step.

The student will practice in first place with symmetrical pieces and after this with asymmetrical ones.

Training set in a case, containing:

Aluminum cope and drag box, screwable.

Aluminum pattern plate.

3 different plastic patterns:

The bell as a natural or an one-piece pattern.

The Anvil as a split, asymmetrical pattern demonstrates the shrinkage cavitation.

The Anchor, as a split, symmetrical pattern.

Rammer.

Small downgate and big downgate.

Bell clapper.

Bell mountings.

Thermometer.

Soucepan.

Pencil brush.

Pattern-draw tool.

Shovel.

Scraper.

Lancet.

Brush.

Separating agent.

2 Kg. metal alloy (melting point 200°C approx.) and 6 Kg. moulding sand in a separate container.

All instruction set is supplied ready to use, including enough test material.

All material is recoverable.

Manuals:

This unit is supplied with the following manuals: Required Services, Assembly and Installation, Starting-up, Safety, Maintenance & Practices Manuals.

Dimensions: 600 x 400 x 200 mm. approx.

 

EXERCISES AND PRACTICAL POSSIBILITIES :

1.- Study of foundry fundamentals.

2.- Introduction to sand casting: student experiments with 3 different patterns (bell, anvil and anchor).

3.- The bell as a natural or a one-piece pattern.

4.- The Anvil as a split, asymmetrical pattern, demonstrate the shrinkage cavitation.

5.- The Anchor, as a split, symmetrical pattern.

 


Additional Information:
  • Item Code: ET-1410

Semi Automatic Coil Winding Machine

Semi Automatic Coil Winding Machine ETK-1161

The single spindle machine which is designed to provide optimum winding solutions for specific applications at low capital and running cost through simple design and construction.
Menu-driven programming through alpha-numeric dialogue display, a powerful set of programmable parameters and multi-program memory help in realizing complex winding programmes with exceptional ease. This machine is provided with external traverse to address large coils.

Technical Specification Of Coil Winding Machine

Particulars

Specifications

Spindle

Single

Winding Speed

3000 RPM (Max.) Programmable by 3 step pulley mechanism

Wire diameter

1.6 mm (max.) on bobbin dia 150 mm.

Winding Width

300 mm (Programmable in 0.01 mm steps)

Bobbin Diameter

250 mm (max) (wire dia max. 1.0 mm)

Memory

100 Programmes Non-volatile

Spindle Motor

AC Motor

Input (Power Supply)

220/240V AC, 50 Hz, 0.75 KVA

Dimensions

560 (L)x560 (B)x 380 (H)

Weight

100 Kgs. (approx)


Power Transformer Coil Winding application
  • Pump Coil.
  • Inverter Coils.
  • Stabilizer Coils.

Automatic Ring & Ball Apparatus

Automatic Ring and Ball Apparatus  ETK-1162
Technical Specification of Automatic Ring and Ball Apparatus : 
  • Measuring temperature accuracy: ±0.1℃
  • Automatically increase of temperature per minute: 5℃ Timer accuracy:
  • 1S Steel ball weight: 3.50±0.05g, diameter: 9.50mm Temperature display: 0.02℃ Water in the beaker is agitated by magnetic stirrer
  • The test is performed in duplicate under closely controlled conditions
  • Temperature control: Water is used as the bath medium for binders with softening points below 80℃. Above this temperature glycerol is used in place of water

Electricity & Electronic Fundamental Trainer

Electricity And Electronic Fundamental Trainer  ETK-1111

Edutek are manufacturer and Exporter of Educational trainer equipment .Electricity And Electronic Fundamental Trainer, Component And Circuit Based Pcb Modules.
Electricity and Electronics Fundamentals Trainer covering the concepts, theoryand applications of basic electricity and electronics that are required for technicians. This comprehensive course is presented in a systematic way startingthe student out at the beginning covering basic theory and measurements withmeters.
Topics of Experiments :
  • Electrical and Electronic symbols & schematic diagrams, Electricity/Electronic
  • safety, Using the Multi meter, Series and Parallel, Resistance Circuits, Voltage
  • and Voltage Measurement, Measurement and Control of DC, Ohm's Law and
  • the Series Circuit, The Parallel Circuit, Series-Parallel Circuits, Kirchoff's Laws,
  • Thevenin's Theorem, Power, Electricity and Magnetism. Alternating Current
  • Measurement. Capacitors. Capacitive Reactance and Phase Measurement, Inductance, Series RL and RC Circuit
  • Characteristics, The Series Resonant Circuit, Parallel Resonance, Power in AC Circuits, Filter Circuits, Non linear, Devices, Semi
  • conductor Diodes, Diode Circuits, Power Supply Circuits, Junction Transistors, Common Emitter Amplifier Characteristics, The
  • Emitter Follower Amplifier, Advanced Transistor Amplifier Circuits, Audio Amplifier Characteristics, Differential Amplifier,
  • Field-Effect Transistors and Amplifiers, Linear Integrated Circuits, Op Amp Circuits, Oscillators, Multi vibrators, 555 Timer,
  • Large-Scale IC Signal Generation, Signal Control Circuits, Solid-State Switches, Digital IC Gate Circuits, Analog-to-Digital
  • Conversion, Digital-to-Analog Conversion, Digital IC Decoders

Specification :

A. Base Station:Student Base Station: This unit serves as the platform for carrying out the student experiments. Experiment modules areinserted into the base station and interconnected to the services provided by the base station through 2 mm sockets and testleads. The base station provides for all the primary needs of the experiment modules, and includes a variety of componentssuch as the following:1. Fixed regulated DC Power Supplies: +5V, +15V, -15V2. Variable Regulated DC Power Supply 0 - 25V3. Potentiometers: 4 units4. Pulse Switches: 2 units5. 8 bits LED display.6. Toggle Switches: 5 spdt7. Speaker: 2.25 inch, 8 ohm/0.25w8. One set of 2 mm stackable test leads to perform all required inter-connections.B. Set of PCB Board Experiment Modules: The trainer comes with a complete set of experimental board modules that closelyfollows the courseware. Each module consists of a high quality epoxy coated fiber glass printed circuit board with theelectronic components mounted on to the surface. Each board is printed with a clearly laid out silk screened schematic circuit orcomponent diagram. The experiment boards are designed to be very educational and to reinforce the link between thetheoretical and practical aspects. All the components and connections (PCB tracks) in each circuit are clearly visible and can beassociated with the schematic diagram, nothing is hidden from view.

Transformer Trainer

Transformer Trainer - 11931A

A Single and Three Phase Transformer Experimental Trainer specially designed to help students understand about the various aspects in transformer design and operation such as magnetic fields and circuits, equivalent circuits,phasor diagrams, loss components, load testing and regulation, transformer components etc.A comprehensive experiment manual is provided to guide the students on basic transformer theory and practice, and also provides a practical introduction to power supplies and electrical machines.

Experiment topics
  • Polarity of windings.
  • Series and parallel connection of secondary windings.
  • Magnetic circuits, incorporating the concept of flux, flux density, field.
  • strength, magnet automotive force.
  • Phasor diagram with transformer on no-load.
  • Equivalent circuit of power transformer.
  • Transformer efficiency using open and short circuit test.
  • Full load test showing temperature rise and efficiency.
  • Voltage regulation using open and short circuit tests.
  • Current transformer Delta and Y connection.
Specification of Transformer Trainer :

A - Base Station: This unit serves as the platform for carrying out student experiments. The unit contains two ammeters and two voltmeters which are used to do the voltage and current measurement during the experiments. A clear diagram of a transformer is shown on the base station and is completed with 4mm terminal connections to build transformer circuits.Circuit protection is provided to prevent short circuit and over current conditions.
  • Power requirement : 220V/380, 50/60Hz
b. Single Phase Transformer:

• Primary : 220V• Secondary : 0-12 V/3A, 0-24V/1.5A, 0-42V/0.75A

c. Single Phase Transformer
  • Primary : 220V
  • Secondary : 2 x 110V/1 A
d. Three Phase Transformer
  • Primary : 380V/300W, 3 phase
  • Secondary : 0-380V, 3 phase
e. Accessories
  • Experiment manual
  • Sets of test leads
  • OR Its Equivalent.

Fundamental of Appliance Trainer

Fundamental Of Appliance Trainer - ET-11931B

The Fundamentals of Appliance Repair Trainer should be designed to provide students with strong foundation of Electrical Technology that is used in Electrical Appliances. The trainer should provide a good background theory on electricalas well as the trouble shooting and repair technique for most of electrical appliances. The experiments should be focused on essential areas with inelectrical technology that is related to electrical appliances repair.

Courseware:

The trainer should be included with operation manuals and experiment manuals which includes step-by-step chapters with theoretical information and practical student experiments. Each chapter must include student tests with ananswer key. The Trainer should cover the following experiment topics:
  • Using meters for trouble shooting.
  • The importance of Power Factor.
  • Basic AC circuits examples.
  • Electricity and Heat.
  • Determining the length of Resistance Wire.
  • Incandescent Lamps.
  • Fluorescent Lamps.
  • Starting Methods.
  • Switches in Lamps.
  • Servicing Lamps.
  • Electricity and transmission of Power.
  • Transformers.
  • Servicing by Substitution.
  • Using Test Lamps.
  • Servicing with Test Instruments.
  • Voltage Tests.
  • Open Circuits.
  • Checking Line Voltages.
  • Testing Special Circuits.
Modules :

The trainer should consist of several modules which feature electrical and electronic components that are mounted onto high quality boards with the circuit symbols diagram silk-screened onto the surface. The inter-connections between key components or circuit blocks should be provided through 4 mm color coded sockets and test leads. Panels could be quickly arranged in various configurations so as to conduct many experiments. Panels should be A4, A5 or A6 in size and should feature the electrical circuit diagram silk-screened into the surface of each panel. This could allow the students to do the wiring quickly and with many variations, so that the learning will become more interesting and effective. A 3 levels mobile stand should be provided for holding the module boards during experimentation and should be completed with power supply connections and necessary accessories for doing the experiments.

Electrical Installation Trainer

Electrical Installation Trainer  1245A

The Electrical Installation Trainer to provide students with a good foundation in electrical technology. The system must consists of a number of modules which are suitable for the study of electrical measurement, electrical installation and for the troubleshooting of electrical installations. Each module contains realelectrical components such as contactors, switches, lamps, push buttons, timers,circuit breakers and relays. These modules can be arranged on the panelframe stand in a variety of configurations to make many different and interesting installations. Connections between the components or between themodules are made by using 4 mm test leads which plug into 4mm color codedheavy-duty binding posts. This will then allow the students to do the wiringquickly and with many variations. The trainer comes complete with laboratory manual which contains many experiments on electrical installation technology.Mobile training frame stands is available to mount the panels. Storage cabinets must be added to provide a convenient place to store the panelmodules. Unit should be ungradable and have the ability for Inter connectivity between training systems in the teaching laboratory. Manual provided must clearly show the following educational topics of experiments are met;Experiment topics coverage:Residential Switches and Sockets Familiarization, Industrial Sockets and Plugs Familiarization, Special Purpose Switches,Lamps and Fitting Familiarization , Residential Electrical Installation, Intercom Installation, Door/ Bell Switch and Buzzer Installation, Controlling Single Lamp from Two Locations and Three Locations , Remote-Controlled Load Circuit, Timer-Controlled Lamp Circuit, Latching Relay Circuit, Three Phase Circuit- Voltage Measurement, Three Phase Circuit- Current Measurement

Specification :

The modules feature real industrial components that easily and securely fit into the training panel frames. , Special powdercoated aluminum rails for plexiglass panels, which gives secure and firm fitting modules. Panels must be quickly arranged toconduct many experiments. All electrical connections for each component are brought out to 4mm color-coded heavy-dutybinding posts. Wiring from the component to the terminals is also color-coded. Interconnections between the panels andcomponents are made via 4mm stackable test leads. Stackable test leads allow multiple connections from a single point,which is very useful when taking electrical measurements. Therefore the student is able to relate the circuit theory with thepractical aspects of the real component and actual wiring connections.The trainer will include:Residential Switches:Mounted on Plexiglass panel with 4mm terminals- Switch, Surface mount, 1 way, 2 terminal, 10A, 1 gang, (4 modules)- Switch, Surface mount, 2 way, 3 terminal, 10A, 1 gang, (4 modules)- Switch, Surface mount, 2 way, 4 terminal, 10A, 1 gang, (4 modules)- Switch, Surface mount, Intermediate, 10A, 1 gang, (4 modules)- Switch, Surface mount,1 way, 2 terminal, 10A, 2 gang, (2 modules)- Surface mount, 2 way, 3 terminal, 10A, 2 gang (2 modules)- Switch, Surface mount, 2 way, 4 terminal, 10A, 2gang (2 modules)- Switch, Surface mount, marked "Bell" (2 modules)- Switch, Surface mount, illuminated (2 modules)- Switch, Surface mount, dimmer (2 modules)- Bell/Door opener push button: 2 SPST switches 250Vac, 10A (1 module)Sockets Sets:To include the sockets mounted onto panel with 4mm terminals, each socket is to include a matching plug- 1 Phase Socket with switch, 13A, 3 prong, 1 gang (3 modules)- 1 Phase Socket with switch, 13A, 2 prong, 1 gang (2 modules)- 1 Phase Socket, with switch, 16A, 1 gang (5 modules)- 1 Phase Industrial Socket, with cover, 16A, 2 Pole & Earth (2 modules)- 3 Phase Industrial Socket, with cover, 16A, 2 Pole with neutral & Earth (2 modules).

Electrical Machine Trainer

Electrical Machine Trainer - ET-11931B
The Electrical Machine Trainer is designed to provide the students with agood and strong foundation in electrical machine technology. Thetrainer consists of modules and panels containing meters, variableresistors, resistive load, capacitive load, inductive load, motors,generators, and other supporting equipment which are suitable to studyvarious types of motors and generators according to theircharacteristics. The study of motors and generators covers the theory,design and characteristic of each motor and generator.
Educational Objectives of Electrical Machine Trainer
  • DC Machines Trainer Set
  • Prime Mover & Torque Measurement.
  • DC Motor Construction, DC Generator Construction.
  • DC Shunt Motor Characteristic (starting, running, under load), DC
  • Series Motor Characteristic (starting, running, under load).
  • DC Compound Motor Characteristic (starting, running, under load).
  • DC Separately-Excited Shunt Generator Characteristic (running, under load). DC Self-Excited Shunt Generator
  • Characteristic (running, under load).
  • DC Compound Generator Characteristic (running, under load). DC Motor Starting Method
  • Speed Control of DC Motor (requires optional power electronic module)
  • Single Phase AC Machines Trainer Set
  • Prime Mover & Torque Measurement
  • Split-Phase Induction Motor Characteristic (starting, running, under load).
  • Capacitor-Start and Run Motor Characteristic (starting, running, under load).
  • Universal Motor Characteristic (starting, running, under load).
  • Three Phase AC Machines Trainer Set
  • Prime Mover & Torque Measurement
  • Wound-Rotor Induction Motor Characteristic (starting, running, under load).
  • Squirrel-Cage Induction Motor Characteristic (starting, running, under load).
  • Synchronous Motor Characteristic (starting, running, under load).
  • Three-Phase Alternator, Alternator Under Load, Alternator Synchronization, 

Alternator Power

  • The Three-Phase Induction Motor Starters
  • Rotary Frequency Converter

Description of modules
  • AC/DC main power supply
  • Mobile type trainer work station
  • Universal motor
  • DC multifunction machine
  • Single phase integrated induction motor
  • Three phase slip ring motor with wound rotor
  • 3 phase, 2 speed, pole changing induction motor with dahlander winding and squirrel cage rotor
  • 3 Phase, synchronous machine with cylindrical rotor
  • Three phase isolator switch
  • Manual star delta switch
  • Pole changing switch/selector switch
  • Variable resistive load 1φ and 3
  • AC ammeters, AC voltmeters, DC ammeters, DC voltmeters
  • Single phase/three phase wattmeter
  • Single phase/three phase power factor meter
  • Electric dynamometer, Synchronizing 
  • switch with lamps (bright – dark method), Test leads, Machine protective cover, Shaft
  • coupling, Storage cabinet.

Power Distribution Board

Power Distribution Board  Et-1270

Power Distribution Board should be specifically designed to suit the needs of ElectricalLaboratory Systems. Safety aspects are designed into the system with high qualitycomponents through out for safe guard and protection to the operator.

Modules

  • The unit should allow wide flexibility to change the number of circuit breakers and receptacles according the needs.
  • The systems should include a range of 4 up to 12 receptacles, each with its own circuit breaker, that allow the user to connect electrical equipment directly to the board.
  • This on-board design should consolidate all the essential components into an easy to understand and operate system.
  • The design should allow for extension boards to the bus bar if needed.
  • The number of circuit breakers, receptacles, bus bars could be specially ordered for custom requirements. In addition, components such as transformers or additional electrical meters, such as frequency meters or power factor meters, could be added to the system.
  • The unit should be equipped with a Voltmeter and Ammeter to monitor the voltage and current in the lines.
  • A direct-on-line push button start/stop switch should be provided for mains power control with safe guarded easy operation.

Specifications
  • 1 Molded Case Circuit Breaker 160/600 A
  • Overload and shunt trip coil
  • 1 Ammeter 100 A/5 A with selector switch
  • 1 Voltmeter 500 V with selector switch
  • 1 Earth Leakage Circuit Breaker (ELCB)
  • 1 Frequency meter
Power factor meter

  • 1 Maximum demand indicator
  • 2 Emergency stop button
  • 1 Kwh meter, 3 phase
  • 1 Kwh meter, 1 phase
  • 4 Circuit breaker, 32 A, three phase
  • 4 Circuit breaker, 6 A, single phase
  • 4 Output socket, 5 pin (3 phase)
  • 4 Output socket, 3 pin (single phase)
  • 1 Set protective fuse
  • 5 copper bus bar 0.25 inch x inch
  • 1 Set indicator lights
  • 1 Set current transformer
  • 1 Set input socket, plug and cable
  • 2 Compartments for storing made by heavy sheet steel finished baked epoxy powder with engrained and silk screen
  • legend.

Educational Motor Generator System

Educational Motor Generator System - ET-2564A
Motor and Generator/Alternator mounted into a special frame to accommodate coupling and electrical connections. All wiring connections from machine windings are brought out to 4mm terminals. Connection leads with banana plugs facilitate quick and easy connections between the Motor-Generator System and other controls. A fault insertion for machine winding is available as an optional item for student trouble shooting exercises.
Educational Objectives Electric Motor and Generator Teaching Systems
  • Induction motor as prime mover principles
  • Saturation Curve of Generator/Alternator
  • Balance Load Effect of Generator/Alternator
  • Unbalance Load Effect of Generator/Alternator
  • Open circuit, Short Circuit characteristics
  • Voltage regulation in Generator/Alternator
  • Losses and Efficiency in Generator/Alternator
  • Troubleshooting Generator/Alternator system

Specifications of Educational Motor Generator System
  • Power supply: 220/380 VAC, 3A.
  • Power Indicator : indicate the incoming power at L1/R, L2/Y, L3/B.
  • Power Control : Start Button, Stop Button, Emergency Button.
  • Lamp Indicator : indicate run, overload and emergency condition on Instrument panel.
  • Circuit Breaker : ELCB (Earth Leakage Circuit Breaker), MCB (Miniature Circuit Breaker).
  • AC Voltmeter : Used to measure AC voltage.
  • AC Ammeter : used to measure AC Current
  • Motor Switch : used to connect-disconnect the motor with the power supply.
  • Generator Switch : used to connect-disconnect the generator output to load.
  • Generator Excitation : DC Voltmeter, DC Ammeter, DC MCB for short circuit protection, Excitation Switch, Excitation Control
  • (%), Variable DC power supply (3 to 180VDC).
  • Generator.
  • DC Shunt Wound Generator,
Alternators
  • 1 Ph. Alternator with Cylindrical Rotor, Stator Wound Rotor exited, 300VA
  • Motors:
  • DC Shunt Motor, 1 HP
  • AC Three Phase Induction Motor, 1 HP

Accessories
  • 1 Set of test leads.
  • Base plate machine bed with anti vibration rubber feet (bench top type) and protective cover.
  • Student experiment manual
Extras

  • 1-phase resistive load
  • Faults Insertion System for Motor/Generator winding

Digital Application Trainer

Digital Application Trainer  ETK-11A


This digital application modules trainer should be designed toprovide further and more extensive studies about some important digital circuits. The trainer should offers wide range of most common digital application circuits that are used in digital electronics. The trainer should consists of a number individual modules that could be used with the Digital Trainer Base Station.During the exercises, the student could make essential connections by using 2 mm stack able connection leads. In this way the student is able to construct and to complete the circuit in each of the practical exercises and students could take various electronic instrument measurements in order to under stand and to study the circuit electrical characteristics and behavior.

Modules & Courseware:

A comprehensive experiment manual should be provided toguide the students in studying the various application modules. This manual should include step-by-step instruction to prepare the modules for the experiment as well as some theory to strength en the student's knowledge in areas that is important as a background which is needed be fore doing the experiment. The application trainer should consist of the following modules and course ware respectively.a. Arithmetic Logic Unit The module should be able to perform AND, OR, Add, Subtract and perform binary operations. Uses 74181 IC that could be programmed which also use 7476 IC as data selector for the operations.b. Encoder & Decoder Application The module translates the 10 inputs generated form the switches to be inverted to BCD forms by the Encoder. Thede coder then should be able to translate from BCD to 7 segment code which lights the proper segment on the output display.c. Data Transmission and Digital Switching Network System.The module could be use for sending and receiving serial data and are called multiplexers. It converts parallel digital data into serial then back to parallel.d. Frequency to Voltage and Voltage to Frequency Converter.The module should be a monolithic circuit designed for accuracy and versatility. It converts Voltage to Frequency or Frequency to Voltage.e. Analog to Digital Converter and Digital to Analog Converter The module should converts analog voltage into an equivalent digital signal and vice versa.The experiments that should be able to be facilitated by the modules are:Weighed Resistance Ladder Network Converter.
  • R-2R Ladder Network Converter.
  • Fast 8-bit DAC.
  • Fast 8-bit ADC.
  • f. Breadboard Module
The module should be able to be installed on the digital trainer base station. The module could be used for particular digital circuits or prototyping on some sections of the more complex digital circuits during practical applications or tests.

Analog And Digital Communication Trainer

Analog And Digital Communication Trainer  - ETEST-4553
a. Analog Communication Trainer
Features of Analog Communication Trainer
Analog Communication Trainer should be designed in a modular formatusing base station and PCB module approach in order to make the programboth comprehensive and flexible for both student and the teacher. The basestation should provide a working platform for the Analog CommunicationModules. All necessary equipment such as power supplies, switches andothers services required for operation of the modules should be included onbase station.
Courseware
A comprehensive experiment manual should be provided to guide thestudents in studying the various application modules. This manual shouldinclude step-by-step instruction to prepare the modules for the experimentas well as some theory to strengthen the student's knowledge in areas that isimportant as a background which is needed before doing the experiment.Complete Analog Training System should be provided with all of the topics. The trainer should be able to cover thefollowing topics:
  • Oscillators and filters
  • AM Modulator & Demodulator
  • DSB/SSB Modulator & Demodulator
  • FM Modulator & Demodulator
  • PPL frequency synthesizer

Modules
The modules should feature electrical and electronic components that are mounted onto printed circuit boards with thecircuit diagram silk-screened onto the surface. Interconnections between key components or circuit blocks should beprovided through 2mm test leads.
b. Digital Communication Trainer
Features
Digital Communication Trainer should be designed in a modular format using base station and PCB module approach inorder to make the program both comprehensive and flexible for both student and the teacher. The base station shouldprovide a working platform for the Digital Communication Modules. All necessary equipment such as power supplies,switches and others services required for operation of the modules should be included on the base station.Courseware:A comprehensive experiment manual should be provided to guide the students in studying the various application modules.This manual should include step-by-step instruction to prepare the modules for the experiment as well as some theory tostrengthen the student's knowledge in areas that is important as a background which is needed before doing theexperiment. Complete Digital Training System should be provided with all of the topics. The trainer should be able to coverthe following topics:
  • Analog to digital & digital to analog converter
  • Parallel to serial & serial to parallel converter
  • ASK modulator & demodulator
  • FSK modulator & demodulator
  • PSK modulator & demodulator
  • QPSK modulator & demodulator
  • RZ, NRZ & clock delay
  • Word clock
Modules:The modules should feature electric

Transducer & Instrumentation Kit

Transducer & Instrumentation Kit   ET-1276

The Sensor and Transducer Trainer is a modular training system which covers the theory, fundamental concepts and applications of sensors and transducers. The trainer should has many experimental modules covering a wide range various type of sensors and transducers including standard signals processing methods, which are required by many applications. The trainer should consists of base station into which a number of experiment modules can be fitted. A variety of modules should be available which extensively covers the topics of sensors and transducer.

Specification of Transducer & Instrumentation Kit : 

A.Base Station The student base station serves as platform for carrying out the experiments. The experiment modules should be inserted into the base station and inter-connected to the services provided through 2mmsockets and test leads. The base station should provide for all the primary needs of the experiment modules and includes a variety of components such as the following:Converter : 8 bit ADC/DAC Switches : 8 SPDT switches Amplifier : Instrument amplifier Potentiometer : 2 Potentiometer Relays : Two 12VDC relays DC Fixed Power : -5V, 0, +5V, -12V, 0, +12VDC Variable Power : 0 – 15VDC Power Overload Indicator Input Voltage : 220/240 VAC, 1 phase, 50HzAC fuse and main power switch B. Experiment Modules

Specialized Electronics Circuits :

This should be consists of a set of several boards that covers aspects of specialized electronics circuits that are commonly required for the study of sensors and transducers. Topics and circuits should covered include Digital to Analog conversion,Analog to Digital conversion, Voltage to Frequency Conversion, Frequency to Voltage Conversion, Bridge Circuits, various filter circuits, signal amplifiers, signal conditioning linearization.

Temperature Sensor Module
Controlled temperature device with precision integrated-circuit temperature sensor which can be used to demonstrate aspectsof temperature control as well as provide for a regulated load device for Temperature module.

Proximity Sensor Module :
  • Rotational speed module with inductive proximity sensor which can be used to demonstrate aspect of speed control for
  • rotational motion system
Pressure Measurement Module :
  • This module covers the main methods of measuring for pressure in various applications. Piezo resistor sensor which can use to read pressure of liquids and gasses
Photo Electric Sensors Module
  • These cover a wide range of devices that can be used for many applications. General photo/light sensor module which can be used to demonstrate aspects of light intensity control for automatic lighting system
Position and Displacement Measurement Modules :
  • The modules are offered which are commonly used to detect position and displacement of objects. LVDT Transducer Module which can be use to indicate the linear position of a moving object
Air Flow Sensors Modules
  • These modules contain a variety of units that are common to the measurement of air flow.
  • Consist of Differential Pressure Module and Paddle Wheel type Flow meter Module.
Sound Sensors Modules :
  • The modules cover the principles in the reception of sound waves and their signal processes.
  • Consist of Condenser Microphone and Dynamic Microphone.

PLC Programmer

PLC Programmer   ETK-1112A


The PIC programmer set has designed as a tool to allow Students and developers to program PIC Micro-controllers. It should be a powerful and flexible system that provides a user friendly environment to carry out a large variety of programming application tasks. The programmer should come complete with the development programming board and Programming Software.The PIC programmer should be used for downloading a specific program for controlling the experiment modules such as, temperature control, speed control and traffic light control.The PIC programmer should uses USB/Serial port connection. The PIC programming software can be updated as new Pics are released.. The Programming software for PCs must work under Windows NT/2000/XP/7. The kit should be suitable for learning PIC design and programming of various PICs.

Specifications of PLC Programmer Trainer :

USB/Serial port connection.ICSP (In Circuit Serial Programming) Connector Windows NT/2000/XP/7 compatible software.Power requirement : 16 Volt DC @50 mATo come complete with USB and serial cable, Power cable, CD software and User manual (user guide)
Included Experiment Modules :
  • Engine Speed Control Module.
  • Temperature Control Module.
  • Traffic Signal Control Module.

Programmable Logic Control Trainer

Programmable Logic Control Trainer    ETK-1113A


The Programmable Logic Controller is an PLC product which is powerful and flexible systems ideally suited to your specialized needs. The system should be compatible with a variety of accessories and peripheral, thus allowing this versatile system to be easily expandedinto larger systems. The experiments should be chosen to cover the topicsfrom basic familiarization of the PLC up to programming and application. 

Courseware :
The trainer should cover the following topics of experiments:
  • Basic operation of PLC trainer
  • PLC software
  • Introduce the PLC hardware, such as: power supply, inputs, outputsand RS 232 communications.
  • PLC external I/O devices.
  • Timer circuit (functions of timer instruction in PLC)
  • Counter circuit (function of counter instruction in PLC)
  • Box conveyor (timer and counter application)
  • Keep instructions
  • Difu and Difd instructions
  • Difu and Difd application
  • Shift registers instructions
  • Overhead crane control application
Handheld programming console :

Specifications of Programmable Logic Control Trainer :
1. Trainer requirements
  • The unit should features a larger capacity compact PLC with approx. 40 I/O points.
  • The unit should be ideal to use with the applications board module for experimentation (using optional PLC application
  • modules)
  • The set should include software for programming via a PC (PC is optional item).

2. Components
PLC Trainer 24 V/2A DC load rating, approx. 24 input and approx. 16 output 40 point I/O with LED Indication. Computer programming software with ladder diagram. Main voltage: 220/240 VAC, 50/60 Hz. I/O: approx. 24 input switches, approx. 16 LED output indicators. 24 VDC Power supply

3. To come complete with comprehensive courseware.

4. Accessories
  • Set of connection leads.
  • Handheld programmer
  • 2 analog input and 1 analog output extension module.
  • Experiment manual

PLC Application Modules

PLC Application Modules ETK-1114


The trainer has designed to work with most equipment that can becontrolled by PLCS. It specifically work with the PLC trainers provided in this package.

Features of PLC Application Modules :

The system consists of a base station which provides a platform for themodules. The base station includes a number of switches, power supply and other control and signaling devices that can be used in conjunction with the modules for control, signaling or modification purposes. It features graphic representations of the device that they are simulating and use LED's to illustrate the actions that are taking place. The modules range from basic to intermediate levels in complexity. It provides practical programming applications for the student to workon and apply his new knowledge about PLC operations. These modular application modules allows immediate and easy use of PLC programming techniques and also the student may perform debugging procedures after watching the program run and correction errors.

Specifications PLC Application Modules :
1. Base Station
  • The base station should have the following specifications:
  • The base station provides a platform and general facilities which the modules require for operation.
  • Contains a number of relays, switches, signaling devices, lights and buzzers which can connect to the application
  • modules via 2mm stacking interconnect cables that are also included.
  • These switches and signaling devices allows the application simulation modules to operate and also provide some
  • variables to the operation so that different characteristics could be explored.

2. Modules

a. Traffic Light Module
Objective: After completing this experiment, the students are expected to understand of using the TIM instruction in the Traffic Light operation programming application

b.Vehicle Parking Module Objective: After completing this experiment, the students are expected to understand of using DIFU,DEC, CMP, and MOVE instructions in the Vehicle Parking operation programming application.

c. Elevator Lift Module Objective: After completing this experiment, the students are expected to understand of using SET, KEEP, SBS, TIM, SBNand RSET instructions in the Elevator Lift operation programming application.

d. Laundry Module Objective: After completing this experiment, the students are expected to understand of using KEEP, SET, TIM, DIFU, CNTand RSET instructions in the Laundry operation programming application.

e. Bottling Plant Module Objective: Upon the completion of this experiment, the students will be guided to understand of using SET, TIM, and RSET instructions in the Bottling Plant operation programming application

f. Product Line Inspection Module Objective: After completing this experiment, the students are expected to understand of using SET, TIM, and RSET instructions in Product Line Inspection operation programming application

g. Packing Module Objective: After completing this experiment, the students are expected to understand of using CNT instruction in the Packing system Operation programming application.h. Tank Level and Pump Control Module Objective: After completing this experiment, the students are expected to understand of using DIFU and TIM instruction inthe Tank Level and Pump Control Operation programming applicationi. Alarm System Module Objective: After completing this experiment, the students are expected to understand of using TIM and KEEP instruction inthe Alarm System Operation programming application.

Electronic Control Trainer

Electronic Control Trainer   ETK-1115

This trainer is provide a comprehensive course on Solid State Relays and their applications. Solid State Relays are typically used as the modern replacement to conventional electromagnetic relays. Solid State Relays generally provide more flexibility in their control applications and easily combine low voltage and high voltage circuits working in conjunction with each other. This trainer also provides a good introduction to semiconductor applications and theory.

Education Objectives :
  • The trainer features three low voltage circuits which controls the solid State Relay that in turn controls a higher voltage circuit.
  • The low voltage circuits include a touch operated switch circuit, a sound operated switch circuit and an optical photo relay switch.
  • A mode selection switch is used to determine which low voltage circuit will control the SSR. The SSR will then be turned off or on by this circuit.

Electronic Tools Kit

Electronic Tools Kit - ETK-1116


Edutek are offering Electronic Tools Kit.
Specifications Electronic Tools Kit

The Tools Kit Consists of:•  Utility component storage box•  Long nose plier 135mm•  Diagonal cutting plier 110mm•  Dual Color Lineman's plier•  Bent nose plier 130mm•  Side cutting plier 150mm•  Dual Color Long nose plier•  Reverse action tweezer•  3pcs soldering aid tools•  Soldering iron stand with sponge•  Adjustable wrench 6"•  Ceramic soldering iron 220V•  Electronic Hex Nut Drivers, size 5mm•  Electronic Hex Nut Drivers, size 6mm•  Flat Tip (-) Screwdriver, 3.2 x 75mm•  Phillips (+) Screwdriver, #0 x 75mm•  Flat Tip (-) Screwdriver, 5.0 x 75mm•  Phillips (+) Screwdriver, #1 x 75mm•  Flat Tip (-) Screwdriver, 6.0 x 100mm•  Phillips (+) Screwdriver, #2 x 100mm•  Flat Tip (-) Pro-soft screwdriver, 6.0 x 40mm•  Phillips (+) Pro-soft screwdriver, #2 x 40mm•  Desoldering wick•  Brush•  6pcs electronic screwdriver set•  Crimping tool (metric)•  Desoldering pump•  5pcs needle file set•  Testing screwdriver•  Alignment tool (200mm/2.0mm)•  IC extractor•  Oil can•  Flash light•  7pcs folding type hex key set (metric)•  3 Prong holder•  6pcs open-end wrench set•  Heavy Duty Curved-Claw Hammer•  PVC insulated tape•  Stainless scissors 6"•  Solder core 63%, SN•  Parts tube•  Heat sink•  Utility knife (3 blades self loading)•  Measuring tape 3M/10FT•  Inspection mirror•  Slip-channel pump pliers 254mm•  Pallet for tool kit•  Top pallet tool kit•  Carrying tool case

Telephone Trainer Kits

Item code: 1904

Telephone Trainer is complete working model of telephone. It gives hands on experience on basic telephony concepts, working and different experiments on telephone. The trainer comes complete with exhaustive experiment manual, accessories, test points, and LED's for indication. The complete circuit is printed on single sided PCB in section wise format, depicting the complete flow of system. Practical experience on this trainer carries great educative value for Science & Engineering Students.

Experiments:

  • Understanding of telephone.
  • Study of telephone features.
  • Study of speech circuit.
  • Study of ringer.
  • Study of tone dialing.
  • Study of pulse dialing.
  • Study of switching mechanism between subscriber:

(a) Incoming call.
(b) Outgoing call.

Features:

  • Single sided PCB depicting different working sections
  • 35 test points and LED’s provided on board to study signals.
  • Power from external telephone line, no power supply is required
  • Pulse dialing as well as tone dialing facility.
  • Dialer and ringer section
  • Mute, Redial and ON / OFF hook switches.
  • Telephone Handset: 1 Nos


Technical Specifications:

  • Line in section: One dot line connection port
  • Handset: One handset connection port
  • Keyboard: 4x3 matrix keyboard
  • Dialer: Tone and pulse
  • Facilities: Redial up to 32 digits, Mute, Redial, Flash, Pause switches
  • Indicators: Line in, Hook, tone and ringer, Call mute section
  • Control: Ringer volume control, Ringer speed control
  • Speech path: Fully Non-Blocking
  • Dial pulse ratio: 10 pps + / - 10%.
  • Tone frequency: 430 Hz
  • Input power: From telephone line

Additional Information:
  • Item Code: 1904

Antenna Trainer Kit

Antenna Trainer
Item code: 1906

has been designed to provide useful tools for hands on experimentation and teaching of various commonly used antennas in VHF-UHF-Microwave band in the laboratory for students of all levels. It can be used in stand-alone mode as well as be interfaced with a computer via RS-232 interface. In this Receiving antenna is rotated manually from 0 to 360 degrees and accordingly receiving antennas signal strength can be monitored on the Receiver.

The system consists of a set of two tripods one for mounting the transmitting antenna and another for mounting the receiving antenna, 22 Antennas, RF Transmitter/ Receiver, Antenna Plotting Software and relevant accessories/ cables.

Additional Information:
  • Item Code: 1906

Master Electrical Tools Kit

Master Electrical Tools Kit    ETK-1118

Features of Master Electrical Tools Kit
All the tools in this professional Aluminum tool case are specially selected for electrical engineers. It's a complete, professional and convenient for repairing and installing quickly and accurately.

Specifications of Master Electrical Tools Kit :

The Tools Kit Consists of:
  • Utility knife (3 blades self loading)
  • Electrician's Scissors
  • Led Flash light
  • Adjustable Wrench - 8"
  • PVC Insulated tape
  • Contact Voltage Tester
  • Lineman's Plier
  • Side cutting Plier
  • Long Nose Plier (165mm)
  • Quick Heat Ceramic Soldering Iron 220V
  • Slip Joint Plier 6"
  • Slip-chamel pump plier 8
  • 9PCS Ball Point Long Arm Hex Key Set :Metric: 1.5, 2, 2.5, 3 , 4, 5, 6 , 8, 10mm
  • 7Pcs Flexible Head Gear Wrench Set, Metric: 8, 10, 11, 13, 14, 17, 19mm
  • 3-3/4 digits Auto range Digital Multi-meter
  • Ball Peen Hammer with fiberglass handle
  • Utility Component Storage Box (187.5x117x22mm)
  • Plastic Pipe Cutter (6mm-25mm O.D (3/4",I.D) )
  • All Purpose Snip
  • Aluminum Frame Tool Case W/2 Pallet
Looking for Electrical Training Equipment ?
© Edutek Instrumentation
 
Desktop Site Back to top