Higher Science Educational Instruments

Advanced Polarimeter Experiment Kit

Item code: 11890
  • Using illuminating lens and filter gives collimated polarized light
  • 3 minutes against 6 minute of the conventionally available model
  • Triple shadow field is produced on Half Wave Length plate by the polariser

Additional Information:
  • Item Code: 11890

Electronic Plug In Kit

Item code: 11889

It is a bread board with 4mm sockets arranged in 2x2 matrix. Plug in modules consisting of different type of components are provided with 4mm plugs. These modules can easily be attached/detached to fabricate desired circuit. Kit is very useful for the study of the following circuits. It is supplied without Power supply, Signal Generator and Oscilloscope, which are optional items.

Additional Information:
  • Item Code: 11889

Fresnel Bi Prism Experiment Kit

Item code: 11886
  • Safe and Convenient
  • Mounted on specially designed hexagonal optical bench
  • Power Supply using safety sockets
  • Micrometer eyepiece carried on a slide, which move along a micrometer screw

Additional Information:
  • Item Code: 11886

Kerr Effect Experiment Kit

Item code: 11884
  • Safe and Convenient
  • Mounted on specially designed hexagonal optical bench
  • Power Supply using safety sockets
  • Kerr Cell and Monochromatic Light Filters imported from Leybold of Germany

Additional Information:
  • Item Code: 11884

Michelson Interferometer

Item code: 11888  
  • Heavy base for high stability
  • Precise measurement
  • The mirrors and beam splitters are extremely flat
  • Smooth mirror movement with lever system
  • The set up is equally suitable for other monochromatic light sources such as laser.

Additional Information:
  • Item Code: 11888

Milikan Oil Drop Experiment

Item code: 11891
  • Compact designed light source, microscope & condensers
  • Easy to operate and understand
  • Condenser System can be easily Disassembled for cleaning and Inspection
  • Accurate measurement of plate voltage, plate separation, time and distance of droplet is done with this apparatus.

Additional Information:
  • Item Code: 11891

Newton's Ring Experiment Kit

Item code: 11885 
  • Compact, Steady, Easy to Perform
  • All components including Sodium Light, Microscope, Power Supply & Optics are housed in single piece compact body (Stand alone setup)
  • Very fine scale to measure the fringes
  • Smooth moving Collimating Facility
  • Microscope and Reflecting units are provided with X-V-Z direction motions within compact body

Additional Information:
  • Item Code: 11885

Spectroscopy Experiment Kit

Item code: 1188
  • Quick, accurate experiment
  • Big Base for providing stability during experiment
  • Made up of Brass Spindle & other critical components on CNC for precision accuracy
  • Smooth & frictionless motion of telescope collimator & venire scale
  • Robust instrument and the main structure is of heavy cast metal with bright plated fittings

Additional Information:
  • Item Code: 11887

Electronic Plug In Kit

Electronic Plug In Kit   11889

Exp-1 To Study LR Circuit
Exp-2 To Study CR Circuit
Exp-3 To Study LCR Circuit
Exp-4 To Study Charging and Discharging of a Capacitor
Exp-5 To Study Clipper and Clamper Circuit
Exp-6 To Study Half Wave and Full Wave (Bridge) Rectifier
Exp-7 To Study Capacitor Filter Effect in Power Supply
Exp-8 To Study Power Supply
Exp-9 To Study Unregulated and Regulated Power Supply
Exp-10 To Study PN Junction Diode Characteristics
Exp-11 To Study LED Characteristics
Exp-12 To Study Zener Characteristics
Exp-13 To Study Transistor Input/Output Characteristics
Exp-14 To Study CE Amplifier Frequency Response
Exp-15 To Study RC-Coupled Amplifier (Multistage bAmplifier)
Exp-16 To Study Differential Amplifier Circuits
Exp-17 To Study Astable Multivibrator Circuit Using Transistor
Exp-18 To Study Colpitt's Oscillator
Exp-19 To Study Hartley Oscillator
Exp-20 To Study JFET Characteristics
Exp-21 To Study MOSFET Characteristics
Exp-22 To Study Characteristics of SCR
Exp-23 To Study Characteristics of TRIAC
Exp-24 To Study UJT as Relaxation Oscillator
Exp-25 To Study Logic Gates
Exp-26 To Study Demorgan's Theorem
Exp-27 To Study Half Adder and Full Adder Circuit
Exp-28 To Study Half Subtractor
Exp-29 To Study BCD to 7-Segment Decoder Using 7- Segmen Display
Exp-30 To Study Decade Counter
Exp-31 To Study R-S Flip Flop
Exp-32 To Study D Flip Flop
Exp-33 To Study J-K Flip Flop
Exp-34 To Study Shift Registers
Exp-35 To Study ADC/DAC Circuits
Exp-36 To Study Op-Amp as Inverting/Non Inverting Amplifier
Exp-37 To Study Op-Amp as Adder/Subtractor
Exp-38 To Study Op-Amp As Integrator/Differentiator
Exp-39 To Study RC Phase Shift Oscillator Using Op-Amp
Exp-40 To Study Wein-Bridge Oscillator Using Op-Amp
Exp-41 To Study Solar Cell Characteristic
Exp-42 To Study OP-Amp as a Comparator
Exp-43 To Study Astable Generators Using IC555 Timer
Exp-44 To Study Mono-stable Generators Using IC555 Timer
Exp-45 To Study Ohm's Law
Exp-46 To Study Kirchoff's Law
Exp-47 To Study Series & Parallel Effect of Resistance
Exp-48 To Study Resistance as a Voltage Divider
Exp-49 To Study LDR Characteristics
Exp-50 To Study Thermistor Characteristics

Salient Features:-
  • Student uses Plug- in Modules himself for preparation of circuit.
  • This ‘Do It Yourself Approach’ provides better learning.
  • Very convenient & easy to use 4mm sockets provided to Plug the modules in circuit board for preparation of circuits.
  • Economical & Flexible method of performing all experiment on one circuit board in case you buy a complete set.
  • Safety as per European standard.

Kerr Effect Experiment Kit

Kerr Effect Experiment Kit ETEE-1303

Description :

- Safe and Convenient
- Mounted on specially designed hexagonal optical bench.
- Power Supply using safety sockets.
- Kerr Cell and Monochromatic Light Filters imported from Leybold of Germany.

Michelson Interferometer


Michelson Interferometer  ETEE-1305

Description :

- Heavy base for high stability
- Precise measurement.
- The mirrors and beam splitters are extremely flat.
- Smooth mirror movement with lever system.
- The set up is equally suitable for other monochromatic light sources such as laser.

Spectroscopy Experiment Kit

Spectroscopy Experiment Kit  ETEE-1306

Description :

- Quick, accurate experiment.
- Big Base for providing stability during experiment
- Made up of Brass Spindle & other critical components on CNC for precision accuracy.
- Smooth & frictionless motion of telescope collimator & venire scale.
- Robust instrument and the main structure is of heavy cast metal with bright plated fittings.0

Operational Amplifier Trainer

Operational Amplifier Trainer ETEE-1307

Practical experience on this board carries great educative value for Science and Engineering Students.
List of experiments Following experiments can be performed :
  • Basic operational amplifier circuit
  • Inverting amplifier
  • Non-inverting amplifier
  • Inverting A.C. amplifier
  • Non-inverting A.C. amplifier
  • High input impedance inverting amplifier
  • High input impedance non-inverting amplifier
SOURCE FOLLOWERS
  • OP- AMPS AS ANALOGUE COMPUTER ELEMENTS
  • Inverting summing amplifier
  • Non-inverting summing amplifier
  • Subtractor
  • Differential amplifier
  • A.C. differential amplifier
  • Adder subtractor
  • Multiplication by a constant
  • Division by a constant
  • Integrating amplifier for DC input signals
  • Integrating amplifier for AC input signals
  • Differentiator amplifier
  • Non-inverting differentiator
  • FUNCTION GENERATOR
  • Sine Wave generator using wien bridge network Square Wave generator
  • Pulse generator
  • Square and Triangular wave generator
  • Saw tooth generator
  • Synchronised sawtooth generator with negative going pulse trigger
  • Synchronised sawtooth generator with positive going pulse trigger
MULTIVIBRATORS
  • Astable multivibrator
  • Monostable multivibrator
  • Bistable multivibrator
FILTERS
Low pass active filter High pass active filter Band, Notch filter
VOLTAGE AND CURRENT REGULATOR
  • Basic reference voltage source
  • Basic reference voltage source with buffered output
  • Basic reference voltage source with negative output
  • Negative voltage reference source with buffered output
  • Positive regulator with variable buffered output
  • Negative regulator with variable buffered output
  • Buffered reference source
  • Basic non-inverting voltage controlled current source
  • SIGN CHANGER
  • Sign changer with variable output
  • Switch select sign changer
PHASE SHIFT CIRCUIT
  • Constant amplitude lag circuit
  • Constant amplitude lead circuit
SIGNAL PROCESSING CIRCUITS
  • Diodes
  • Rectifier
  • Half wave rectifier
  • Full wave rectifier
  • Filtered full wave rectifier
  • Detectors
  • Peak detector
  • Buffered peak detector
  • Inverting peak detector
  • Zero crossing detector
  • Buffered zero crossing
  • Clippers
  • Positive peak clipper
  • Negative peak clipper
  • Self buffered series clipper
  • Shunt clipper
  • DC restorer
  • Dead Band Response
  • Feed back circuit with dead band response
  • Variable dead band circuit
  • LIMITERS
  • General purpose unipolar limiter, Bipolar zener limiter, Input current limiter, Diode bridge limiter using one zener, Adjustable bipolar limiter
COMPARATORS
  • Fast precision voltage comparator
  • Single ended comparator with hysteresis & clamped feed back
  • Comparator for signals of opposite polarity
  • Comparator for A.C. coupled signals
INSTRUMENTATION AMPLIFIER
  • Basic differential input instrumentation amplifier
  • Instrumentation amplifier with high input impedance
OUTPUT DISPLAYS FOR COMPARATOR
  • LED driver
  • Lamp driver

Transistor Characteristics

Transistor Characteristics  ETTE-1308

Experimental training board has been designed specifically to study the transistor input and output characteristics in different modes i. E. Common base, common emitter and common collector. This training board is an improved version with germanium npn & pnp transistors in addition to silicon npn & pnp transistors and four meters. The board is absolutely self contained and requires no other apparatus. practical experience on this board carries great educative value for science and engineering students.

Object of Transistor Characteristics
  • To study and plot the transistor input and output characteristics in the following configurations
  • Common emitter mode.
  • Common base mode.
  • Common collector mode.

Features of Transistor Characteristics
  • The board consists of the following built-in parts :
  • 01. Two 0-10v d. C. At 200ma, continuously variable power supplies for base emitter & collector emitter junctions.
  • 02. Two d. C. Ammeters, 65mm rectangular dial with switch selectable ranges of 200 ma &10ma.
  • 03. Two d. C. Voltmeters, 65mm rectangular dial with switch selectable ranges of 1v and 10v.
  • 04. Two silicon (npn & pnp) transistors and two germanium (npn & pnp) transistors.
  • 05. Adequate no. Of other electronic components

Diode And Zener Diode Characteristics

Diode And Zener Diode Characteristics  ETEE-1109
Experimental Training Board has been designed specifically for plotting the forward and reverse bias characteristics of a Germanium semiconductor Diode, and a Zener Diode. The board is absolutely self contained and requires no other apparatus. Practical experience on this board carries great educative value for Science and Engineering Students.

Object

  • To study and plot the forward & reverse bias characteristics of a Germanium semiconductor Diode.
  • To study and plot the forward & reverse bias (breakdown) characteristics of a Zener Diode.

Features

  • The board consists of the following built-in parts :
  • 01. 0-10V D.C. at 10mA, continuously variable regulated Power Supply with low ripple & hum and integral current limiting resistor.
  • 02. D.C. Voltmeter, 65mm rectangular dial, with switch selectable ranges of 1V and 10V.
  • 03. D.C. Microammeter, 65mm rectangular dial, with switch selectable ranges of 50 mA and 10mA.
  • 04. A Germanium semiconductor Diode mounted behind the panel.
  • 05. A Zener Diode mounted behind the panel.
  • 06. Adequate no. of other electronic components.
  • 07. Mains ON/OFF switch, Fuse and Jewel light.
  • The unit is operative on 230V ±10% at 50Hz A.C. Mains.
  • Adequate no. of patch cords stackable from rear both ends 4mm spring loaded plug length ½ metre.
  • Good Quality, reliable terminal/sockets are provided at appropriate places on panel for connections / observation of waveforms.
  • Strongly supported by detailed Operating Instructions, giving details of Object, Theory, Design procedures, Report Suggestions and Book References.
  • Weight : 3 Kg. (Approx.)
  • Dimension : W 340 x H 110 x D210

Passive Filters

Passive Filter   ETEE-1310
Experimental training board has been designed specifically to study the various types of passive filters and to determine the different constants as well as cut-off frequency of that particular passive filter. Practical experience on these boards carries great educative value for science and engineering students.

Object
  • To study different types of passive filters and determine the different constants and cut-off frequency of the following passive filters :
  • Low-pass constant-k filter
  • High-pass constant-k filter
  • Band-pass constant-k filter
  • Low-pass m-derived filter
  • High-pass m-derived filter

Features
  • The board consists of the following built-in parts :
  • Different types of passive filters
  • Adequate no. Of other electronic components
  • Adequate no. Of patch cords stackable from rear both ends 4mm spring loaded plug length ½ metre
  • Good quality, reliable terminal/sockets are provided at appropriate places on panel for connections/ observation of waveforms
  • Strongly supported by detailed operating instructions, giving details of object,theory, design procedures, report suggestions and book

References
  • Weight : 3 kg. (approx. )
  • Dimension : w 340 x h 110 x d 210
  • Other apparatus required:
  • Audio frequency generator
  • A. C. Millivoltmeter

Series And Parallel Resonance

Series And Parallel Resonance ETEE-1311

Experimental training board has been designed specifically for study of Series and Parallel Resonance in LCR Circuits, measurement of Q and dielectric constant of a liquid.Practical experience on these boards carries great educative value for Science and Engineering Students.

To study the following :
  • Series resonance for different values of resistances, capacitances, inductances and plotting of resonance curves.
  • Parallel resonance for different values of resistances,capacitances, inductances and plotting of resonance curves.
  • Measurement of Q for both series and parallel resonances.
  • Measurement of dielectric constant relative permitivity of a liquid.
Features :

The board consists of the following built-in parts :01. Three inductances made on ferrite cores, selectable by a switch.02. Three capacitances with low loss factor, selectable by a switch.03. Three resistances , selectable by a switch.Adequate no. of patch cords stackable from rear both ends 4/ 2mm spring loaded plug length ½ metre.Good Quality, reliable terminal/sockets are provided at appropriate places on panel for connections/ observation of waveforms.Strongly supported by detailed Operating Instructions, giving details of Object, Theory, Design procedures, Report Suggestions and Book.

References :
  • Weight : 3 Kg. (Approx.).
  • Dimension : W 340 x H 110 x D 210.

Other Apparatus Required :
  • Decade Audio Frequency Generator.
  • A.C. Millivoltmeter.
  • A.F. Millivoltmeter.

Klystron Microwave Test Bench

Klystron Microwave Test Bench  ETEE-1312


The microwave test benches are precision made microwave systems, which use standard type rectangular wave-guide components to illustrate the essential elements of this field for study.

The equipment consist of
  • A selection of wave-guide components
  • The power supply for the microwave source
  • A detector
  • A meter, which monitors the detector output
  • Wall chart
  • Microwave chart
These training benches are completely self-contained & provide the means to allow students to carry out practical work at extremely low cost. A comprehensive manual containing extensive microwave theory and a progressive series of assignments is supplied with the Trainer.
Experiments
  • Study of reflex klystron
  • Frequency, guide wavelength measurement
  • SWR, reflection co-efficient measurement
  • Impedance measurement

Satellite Communication Lab Educational Trainer

Satellite Communication Lab Educational Trainer  ETEE-1313

Satellite Communication Lab Features
  • Microwave 2.4 GHz operation satellite trainer
  • 500MHz spectrum analyser providedfele
  • Tele-command and telemetry facility
  • Different baud rates PC-PC link.
  • Emulation of variable signal fading, variable thermal noise
  • Variable propagation delay.
  • Total 4 variable path loss at uplink and downlink channels
  • High RF output power and low noise
  • LCD display of PLL synthesized frequency in transmitter,
  • Receiver and satellite emulator
  • Condenser microphone and speaker for audio link
  • Camera and video to VGA converter for video link
  • Satellite has built-in antennas, transponder for link
  • Helix (LHCP X 2 & RHCP X 2), log periodic X 2, Dish X 2 & Patch X 2 for linear & circular polarization study
  • Signal monitoring outputs at uplink & downlink
  • C/N and S/N measurement facility
Technical specifications satellite uplinking transmitter
  • Frequency :Frequency : 2.4, 2.427, 2.454 & 2.481 GHz PLL synthesized ISM Band
  • Display : LCD 16X2 backlit spurious output : 30 dB typical
  • RF Output Z : 75 Ohms unbalanced
  • RF output level : +3 dBm nominal
  • Path Loss : Upto 35dB variable attenuation
  • Audio 1 : Int. 1KHz sine wave / Ext Mic Ext. function generator waveform
  • Audio 2 : Int. 1KHz sine wave / Ext Mic Ext. function generator waveform
  • Video : Colour/monochrome camera/VCD
  • Waveform : upto 5MHz function generator
  • Digital : Max bit rate 500KHz typical
  • RS232 : PC serial port compatible intput
  • Tele-command : Selectable 4 bit binary input with selectable 4 addresses
  • Enable : Telecommand frame available at digital input
  • FM deviation : Variable on audio and video/data
Satellite downlink receiver
  • Frequency :2.4, 2.427, 2.454 & 2.481 GHz PLL Synthesized ISM Band
  • Display : LCD 16 X 2 Backlit
  • RF Input Z : 75 Ohms Unbalanced
  • Sensitivity : -85dBm
  • Path Loss : 20dB typical variable attenuation
  • Audio 1out : Speaker inbuilt/output
  • Audio 2 out : Speaker inbuilt/output
  • Video Out : 5MHz bandwidth, 1V p/p
  • Digital : Max bit rate 500KHz typical TTL
  • Rs232 : PC serial port compatible output
  • Down-converter : 400-500MHz output for spectrum analysis
  • Telemetry : 4 bit binary LED output with Selectable 4 addresses
  • Valid/Error : Tele-command frame available at correction digital output
  • RSSI Out : Received signal strength output for C/N measurement

Floating Carriage Diameter Measuring Machine

Floating Carriage Diameter Measuring Machine

ETFCD-63

This measuring machine is designed to have accurate measurements of major, minor and pitch diameters of precision Screw threads as well as those of odd flutes Screw taps. All guide ways and wearing parts are hardened and ground.
Descriptions of Floating Carriage Diameter Measuring Machine
  • Measuring Range: 0 - 100mm
  • Functions Measurement of :
  • External plain diameters (parallel)
  • External screw threads (parallel)
  • External screw threads (taper) having threads square to the axis

Auto Collimator

Auto collimator

ETEAC-61

Edutek are manufacturer and exporter of Autocolimator.
Descriptions of Auto Collimator
  • Electronic Autocollimator for Measurement of straightness, flatness, squareness
  • of machine tables, cast iron and granite surface plates / tables.
  • High accuracy and stability over a range of applications.
  • Digital autocollimator controlled using a tablet PC with clear touch-screen software.
  • Laser sighting aid.
  • Measurement range of around 1800 seconds
  • Simultaneous dual axis operation and display
  • Resolution: 0.2 arc sec
Looking for Higher Science Educational Instruments ?
© Edutek Instrumentation
 
Desktop Site Back to top