Incinerators

Large Animal Incinerator

Item code: EKA-230A2

We offer a high quality Large Animal Incinerator to our valuable customers. These products are widely used to destroy the infectious waste animal material. These products are manufactured using latest technology machinery. The heating elements of these systems are made using nichrome wire. The chamber temperature is controlled by a digital temperature controller. These products have separate doors for waste burning chamber and for ash collecting tray.

Large Animal Incinerator are very useful to destroy the infectious waste material generated at health-care facilities. These are of double wall construction, duly insulated with high efficiency ceramic wool/bricks. Heating elements are of special design and are made from Kenthal/Nichrome wire. Separate doors are provided for waste burning chamber & for ash collecting tray. A chimney is provided for emission of fumes. The chamber temperature is controlled by solid state digital temperature controller cum indicator. This assists in saving electrical energy. Easy to install & operate and extremely durable equipment. Available in varied capacity/sizes based on the requirement of Nursing Homes, Hospitals etc.

Optional Accessories:
  • Emission chimney per running ft
  • Dilution Process System
  • Foul Odor Treatment System
  • Gravity settler

Specifications:
  • Temperature: 700 to 900 °C
  • Capacity: 100 to 1000 kg

Small Animal Incinerator

Item code: EKA-230A1

We provide our clients high quality Small Animal Incinerator.These products are offered at standard market prices. Our products are specifically designed to dispose animal carcass. These products are manufactured using latest technology and advanced machinery. The chamber temperature is controlled by a digital temperature controller.

SpecificationU.S StandardMetric System
Length55" (69" With Cremation Burner)1.3 m (1.7 m with cremation burner)
Width40" (54" With Control Panel)1.0 m (1.3 m with control panel)
Height65" (75" With Afterburner)1.6 m (1.9 m with afterburner)
Weight5,200 lbs.2,358 Kg
Gas PressureNatural Gas 7" W.C./Propane Gas 11" W.C.Natural Gas 1.7 kPa W.C.
Propane 2.7 kPa W.C.
Power Requirements110 V, Single Phase, 30 AMPS
Incineration Rate50 lbs/hour22 Kg/hour
Weight Capability200 lbs90 Kg
Stack Height From Grade:Minimum 15'4.5 m
Stack Sections18" O.D 4 1/2" Firebrick Walls/Cast-able Refractory Lining/(Hearth and Ceiling)0.4 m O.D
Refractory/Insulation3" 1900 - Board Insulation0.11 m Firebrick Walls /Cast-able Refractory Lining (Hearth and Ceiling)
0.07 m 1900 - Board Insulation
Chamber DimensionsLength: 32"0.8 m
Width: 26"0.6 m
Height: 25"0.6 m
12 Cubic Feet0.288 Cubic Meters
Burner outputMaximum Input Rating 750,000 BTU's per hour/Afterburner Maximum 400,000 BTU's per hour/Modulation Minimum 100,000 BTU's per hour/Cremation Burner 350,000 BTU's per hour791,250 KJ per hour/422,000 KJ per hour/105,500 KJ per hour 369,250 KJ per hour
Air RequirementsOutside air inlet louvers in the room /located at or below burner height, capable of passing 2,500 CFM of free airOutside air inlet louvers in the room located at or below burner height, capable of passing 1.173 Cubic meters per second

Medical Waste Incinerator

Item code: EKA-230S

We are profound manufacturer, supplier and exporter of a range of Medical Waste Incinerator. These Incinerators are built to the need of our customers to improve the environment to control hazardous solid caste. The incinerator reduces most combustible solid wastes to nearly 2-3 percent by weight. We design an build incinerators for specific needs Ibr specific wastes. Our Electronic Bio Waste Medical Incinerator consists of scrubber.

Features:
  • Robust construction
  • Virtually smoke and smell free with secondary burners
  • High temperature refractory lining
  • Quick heat up time and lesser operational time
  • Easy installation
  • Trouble free operation and maintenance
  • Designed to meet standards of central Pollution Control Board (CPCB)
  • Available in oil, gas or electrically fueled


Our incinerators have following components:
  • Primary Chamber
  • Secondary Chamber
  • Air Blowers
  • Burners or electric heating elements
  • Feeding Door
  • Ash collection pit with ash tray (optional)
  • Chimney

Construction without scrubber:
  • Chamber in incinerators is built as per guidelines of CPCB
  • The body is made of steel and lined with high temperature Refractory that make our Incinerators robust and trouble free for longer life
  • The construction is modular and individual components are easily assembled at site.

 

Applications:
  • Medical colleges Catering wastes Resorts/Hotels Poultry
  • Hospitals
  • Nursing homes Institutions
  • Industrial wastes Camp wastes Municipal wastes Malls/Shopping centers
  • Animal farms like sheep kennels

Specifications:

  • Incineration 1000 C
  • Maximum CO level: 55 mg/m3
  • Combustion efficiency: 99.9%
  • Material: Stainless steel

Combustible Waste Incinerator

Item code: EKA-230B

We are manufacturer, supplier and exporter of a wide range of Combustible Waste Incinerator which are built to the need of our customers to improve the environment to control hazardous solid caste. The incinerator reduces most combustible solid wastes to nearly 2-3 percent by weight. We design an build incinerators for specific needs Ibr specific wastes. Our Bio Waste Oil Fired Medical Incinerator also consists of Oil tired burner.

Features:
  • Robust construction
  • Virtually smoke and smell free with secondary burners
  • High temperature refractory lining
  • Quick heat up time and lesser operational time
  • Easy installation
  • Trouble free operation and maintenance
  • Designed to meet standards of central Pollution Control Board (CPCB)
  • Available in oil, gas or electrically fueled

Our incinerators have following components:
  • Primary Chamber
  • Secondary Chamber
  • Air Blowers
  • Burners or electric heating elements
  • Feeding Door
  • Ash collection pit with ash tray (optional)
  • Chimney

Construction without scrubber:
  • Chamber in incinerators is built as per guidelines of CPCB
  • The body is made of steel and lined with high temperature Refractory that make our Incinerators robust and trouble free for longer life
  • The construction is modular and individual components are easily assembled at site

Users:
  • Medical colleges Catering wastes Resorts/Hotels Poultry
  • Hospitals
  • Nursing homes Institutions
  • Industrial wastes Camp wastes Municipal wastes Malls/Shopping centers
  • Animal farms like sheep kennels

Specifications:
  • Capacity Kgs/hr: 5 to 75
  • Material: Stainless steel

Bio Waste Medical Incinerator

Item code: EKA-230E

We offer a wide range of Electronic Biowaste Medical Incinerator which are manufactured using high quality materials as per industry standards. These Incinerators are built to the need of our customers to improve the environment to control hazardous solid caste. The incinerator reduces most combustible solid wastes to nearly 2-3 percent by weight. We design an build incinerators for specific needs Ibr specific wastes. Our Electronic Biowaste Medical Incinerator consists of electric heating elements.

Features:

  • Robust construction
  • Virtually smoke and smell free with secondary burners
  • High temperature refractory lining
  • Quick heat up time and lesser operational time
  • Easy installation
  • Trouble free operation and maintenance
  • Designed to meet standards of central Pollution Control Board (CPCB)
  • Available in oil, gas or electrically fueled

Our incinerators have following components:

  • Primary Chamber
  • Secondary Chamber
  • Air Blowers
  • Burners or electric heating elements
  • Feeding Door
  • Ash collection pit with ash tray (optional)
  • Chimney

Construction without scrubber:

  • Chamber in incinerators is built as per guidelines of CPCB
  • The body is made of steel and lined with high temperature Refractory that make our Incinerators robust and trouble free for longer life
  • The construction is modular and individual components are easily assembled at site

Applications:

  • Medical colleges Catering wastes Resorts/Hotels Poultry
  • Hospitals
  • Nursing homes Institutions
  • Industrial wastes Camp wastes Municipal wastes Malls/Shopping centers
  • Animal farms like sheep kennels

Specifications:

  • Temperatures: 1000 °C
  • Material: Stainless steel
  • Burn rate: 18 to 20 kg/hr

Electric Incinerator

Item code: EKA-230EI

We manufacture and supply Electric Incinerator that effectively treat office and other waste. These comprise of two chambers, electrical heater and a blower. It is highly power efficient with less operating time. It has a very robust design and has a high temperature refractory lining so as to protect its surface from the effect of high temperatures. They heat up quickly and produce minimal smoke and smell.

Features:
  • Robust construction
  • Virtually smoke and smell free with secondary burners. High temperature refractory lining
  • Quick heat up time and lesser operational time
  • Easy installation
  • Trouble free operation and maintenance
  • Designed to meet standards of central Pollution Control Board (CPCB)

Specifications:
  • Capacity: 15 to 20 kg
  • Material: Stainless steel

Toxic Waste Incinerator

Item code: EKA-230VS

We are profound manufacturer, supplier and exporter of a wide range of Toxic Waste Incinerator, these Incinerator also consists of muiti clone droplet separator, of St. Steel 316 L construction Scrubber capable of handling of flue gas of Incinerator Unit.

Specifications:
  • Dia: 600 mm
  • Length: 2000 mm 1 Set
  • Material: Stainless steel
  • Temperature: 300 °C
  • Control SPM: <100 mg/Nm3 (max) & 99.9% S02

Scrubber Incinerator

Item code: EKA-230ES

We are prominent manufacturers and suppliers of Scrubber Incinerator that are widely used for the treatment of organic waste these comprise of a scrubber that filter their exhaust stream so as to prevent pollution. These have a standard capacity and their process involves less time making them highly power efficient. These result in minimal smell or smoke.

Features:
  • Robust construction
  • Virtually smoke and smell free with secondary burners. High temperature rectifying lining
  • Quick heat up time and lesser operational time
  • Easy installation
  • Trouble free operation and maintenance
  • Designed to meet standards of central Pollution Control Board (CPCB)

Specifications:
  • Capacity: 15 to 20 kg
  • Material: Stainless steel

Municipal Solid Waste Incinerator

Model No: EKA-230MS

Municipal Solid Waste is generated from residential dwellings, offices, hotels, canteens etc. It mainly consists of polythene, plastic materials and kitchen wastes. We offer Municipal Solid Waste Incinerator at economical prices to our valued customers. Our Incinerators are highly efficient and take less time to operate. Equipment can also be designed to meet specific requirements of the customers/local pollution control authorities. Optional accessories like gas scrubbers, continuous emission monitoring & recording systems, automatic waste feeding systems, ash removal systems and heat recovery systems can be supplied on request.

Specifications:
  • Dia: 600 mm.
  • Length: 2000 mm 1 Set.
  • Temperature: 300 C.
  • Material: Stainless Steel 316L.
  • Control SPM: <100 mg/Nm3 (max) & 99.9% S02.
  • Capacity: 15 to 20 kg/batch.

Plastic Waste Shredder

Item code: JKA-230PW

We are manufacturer, supplier and exporter of a wide range of Plastic Waste Shredder which are manufactured using high quality materials. Pollution is a major issue caused by unsafe disposal of toxic & hazardous material. Since the materials like empty glucose bottles, hoses syringes, gloves etc. when burnt, emit gases, they have to be disposed of properly by using alternate safe methods. These when thrown are collected and resold in a new packaging, giving the impression of being fresh, resulting in the spread of deadly diseases. Our shredder is designed to avoid such instances and make the environment pollution free. The shredder shreds all kinds of waste like syringes, needles, glucose bottles, mineral water bottles, plastic lumps, pellets, wood paper, cardboard etc.

Features:
  • Solid body structure and casing
  • Low noise level
  • Heavy duty gear
  • Maintenance gear
  • Unit is protected against overloads and equipped with fuses
  • Auto reverse features with PLC control (optional)
  • Pneumatic feed control (optional)
  • Low budget machine

Application:
  • Finishing & Producing Industry
  • Hospitals/Nursing homes
  • Bio Medical Waste
  • Laboratories
  • Catering Industry
  • Supermarkets
  • Municipal Authorities
  • Pharmaceutical Industry
  • Plastic Industry
  • Card Board Industry

Specifications:

Machine Type

CWS - 200

CWS - 350

CWS - 450

Height

1800 mm

1987 mm

1887 mm

Depth

500 mm

500 mm

500 mm

Cutter Inlet

220 x 250

350 x 250

460 x 250

Hopper Opening

420 x 420 mm

420 x 420 mm

420 x 420 mm

Motor Capacity

3 KW

5 KW

7.5 KW


Additional Information:
  • Item Code: JKA-230PW

Gas Incinerator

Gas Incinerator EKA-230G

We offer economical Gas Incinerator to our customers. This is manufactured using quality components. There are waste gases that include numerous sulfur compounds like H2S, COS and CS2 that are not released in the atmosphere directly. Their disposal is done through incineration. These are capable of maintaining temperatures that are mandatory for the disposal of sulfur compounds.

Hence, incineration is commonly used for the disposal. In order to support the combustion, fuel gas is also needed to retain temperatures mandatory for the oxidation of various sulfur compounds. This is a unique primary purpose of this incineration role. Its secondary function is to scatter the incineration items into the atmosphere. This can be achieved by the discharge at a high temperature by a tall stack. The pollution control agencies can establish the optimum permissible ground level concentration of SO2.

Specifications:
  • Thermal capacity: 0.5 MW up to 20 MW.
  • Efficiencies: up to 99.99%.
  • Material: Stainless steel.

Chemical Waste Incinerator

Item code: EKA-230CM

We offer a high quality of Chemical Waste Incinerator to our valuable customers. These products are used for effective disposal of chemical waste as per the emission standards decided by government. These products are manufactured using optimum quality raw materials that are sourced from reliable vendors. These products are designed to work with wide range of fuels. These systems can be customized as per the requirements of our customers.

The Chemical Waste is also a very dangerous waste for the Health and Life on the Earth. A Perfect Chemical Waste Incinerator can Incinerate almost all type of Chemical Waste as per the Emission Standard Decided by Government. We Design the Incinerators with Different Fuel for Incineration of your Chemical Waste. LDO, , HSD, Diesel, FO (Furnace Oil), LPG, CNG Natural Gas, Etc. can be used as Fuel of our Chemical Waste Incinerators. Our Design is proven and Running Successfully in Many Companies. Please Contact Us for Low Fuel / Fuel Efficient Chemical Waste Incineration System.

Features:
  • Primary Chamber with 1 Fully Auto and 1 Manual Burner Assembly (With Fire Proof Bricks Lining
  • Secondary Chamber with Automatic Burner (With Fire Proof Bricks Lining)
  • Venture Scrubber with SS Shower
  • Scrubber with SS Shower for Wet Scrubbing
  • ID Fan with SS Impellers
  • Chimney with Ladder, Platform & Sampling Point
  • Duct Line with Inside Lining
  • Heavy Construction for Long Life
  • Special Design as per your Chemical Waste and as per your Required Capacity
  • Incineration as per Emission Standard
  • Available for Liquid/Solid Chemical Incineration also in Special Application
  • Also Available Small Size Lower Capacity Incinerators

Specifications:
  • Capacity: 10 Liters Per Hour to 5000 Liters Per Hour
  • Impeller: Stainless Steel
  • Fuel: LPG, CNG, Natural Gas

Portable Incinerator

Portable Incinerator EKA-230P

Portable Incinerator is one of the most effective bio-medical waste treatment equipment applicable for waste created by nursing homes, blood banks, veterinary hospitals and poultry farms. This device is designed for quick and safe disposal. This system comprises of two chambers. The combustion chamber is well insulated. We provide the same at reasonable prices.

The control of our product consists of 2 nos of Micro Processor Controlled Electronic Digital Temperature Controller cum Indicators.

Features:
  • Main Line Indicator: “Red color “neon light will glow 'ON' shows that the current is coming to the oven.
  • Load Indicator: “Green color” neon light Glows when supply to heaters are 'ON'.
  • Rotary Switches: To start the machine. M.C.B for safety.

Construction:
  • Combustion chamber is well insulated and has high temperature safe dozing and exhaust system.
  • It has long and safe treatment of flew gases for safe disposal through long stack.
  • Temperature of Burning Chamber upto 850 C and for secondary chamber 1000 C.

Specifications:
  • Heaters/Elements: Made of A-1 kanthal wire (14 gauge) for primary chamber & (17 gauge) for secondary chamber.
  • Insulation: Strong insulation is done with combination of insulating bricks & silicon fiber insulating blanket to avoid any heat loss.
  • Front Loading Type: It is portable in nature, which can easily placed in a small space in a corner of building.
  • Consisting of Dual Chamber: Works on thermal destruction using controlled combustion chamber; combustion is controlled and provides enough heat to destroy the waste into disposable state.
  • Door: Fitted with hinges & handle for proper sealing to avoid heat loss.
  • Temperature: Temperature of Primary/Burning chamber up to 850 deg. C and for secondary chamber 1000 deg. C.
  • Portable: Whole unit is mounted on sturdy wheels.
  • Capacity: 5 Kg.

Solid Waste Incinerator

Solid Waste Incinerator EKA-230SW

We offer Solid Waste Incinerators that have been designed for the disposal of solid and hazardous waste. These have a high capacity and deal effectively with the excessive ash produced during the incineration of solid wastes. They are designed keeping in mind the quantity of waste they would have to deal with. They are energy efficient and are in compliance with emission norms.

For solid waste with high calorific value, a rotary kiln incinerator and more specifically the counter current rotary kiln is the most versatile technology. The rotary kiln incinerator is typically used for medical and hazardous waste. For solid waste with (very) low calorific value, a moving grate incinerator is a suitable technology. The moving grate incinerator is typically used for domestic or household waste. If medical waste would be incinerated in a grate incinerator, the grate would suffer from "hot spots". Hot spots will destroy the grate and as a consequence moving grate incinerators cannot be used safely for the disposal of high calorific value (hazardous) waste. For solid waste, very homogeneous, as well in chemical composition as in particles size, a fluidized bed incinerator is a suitable solution. A fluidized bed incinerator is typically used for WWTP sludge.

Specifications:
  • Capacities: > 90kg/h to >300 kg/h.
  • Temperature: 300 C to 500 C.
  • Material: Stainless steel.

Hazardous Waste Incinerator

Hazardous Waste Incinerator EKA-230HW

There are industries and companies which produce huge amount of hazardous waste as a result of their manufacturing processes. To prevent pollution of the atmosphere, we offer superior quality Hazardous Waste Incinerator. These incinerators burn the wastes in order to decompose them. We offer these devices at economical prices.

These hazardous waste incinerators are basically the huge incubators which helps in heating up and burning the waste items to decompose them and degrade them in nature. We are offering these hazardous waste incinerators to our clients at a very efficient range of prices.

Features:
  • Helpful and beneficial.
  • Reliable and efficient.
  • Widely used and appreciated.
  • Low consumption cost.
  • Easy to operate and maintain.


Specifications:
  • Material: Stainless steel.
  • Temperature: 300 to 500 C.
  • Capacity: 10 to 100 kg/hr.

Catalytic Incinerator

Catalytic Incinerator EKA-230C

We offer Catalytic Incinerator, which are ideal for use against any kind of waste. These work on the principle of thermal destruction, which involves conversion of chemical residue into ash through the process of incineration at controlled temperature. These have been designed in accordance with the emission standards and leave no residue after the incineration process. In addition, the spent catalyst can be recovered. They are highly energy efficient.

Catalyst Incinerator works on the principle of thermal destruction i.e. conversion of Chemical Residue into ash by incineration at controlled temperatures. Our eco-friendly incinerators ensure total incineration with no unburnt residue and meet the emission standards laid down by the Pollution Control Board. The same systems are used to recovery of spent catalyst from charcoal. The efficiency of recovery is 90 %. The spent catalyst like palladium, platinum can be recovered. Hindustan Platinum, Sun Pharmaceuticals, Sapan chemicals are few of our esteemed client list. Bioline's unique Digital Control Panel with Digital Temperature Indicator & Controller ensures that electrical supply is automatically cut off on achieving the required temperature inside the Incineration Chamber, thus helping you save on electricity consumption.

Specifications:
  • Material: Stainless steel.
  • Temperature: 300 to 500 C.
  • Capacity: 0.5 kg to 100 kg.

Hospital Waste Incinerator

Hospital Waste Incinerator EKA-230HW

We offers good quality Hospital Waste Incinerators to treat the hospital wastage. These wastes include disease-causing germs. Waste Incinerators play vital role in creating a cleaner and healthier environment. In their manufacture, we incorporate superior quality raw materials and latest technology. Our product enables hassle free operations and is cost effective.

We also hold expertise in meeting the demands of Hospital Waste Incinerators that are precision constructed equipment and find wide usage in treating hospital waste that include number of items carrying disease-causing germs. Based on latest process technology, here we are able to design as well as develop Bio Medical or Hospital Waste Incinerators that play vital role in creating cleaner as well as healthier environment. These incinerators for biomedical wastes are further manufactured using quality material and components that provides in them high durability. We also make these undergo several testing procedures so as to maintain quality in the offered end products.

Specifications:
  • Material: Stainless steel
  • Capacity: 5 to 10 kg/hr

Industrial Garbage Incinerator

Industrial Garbage Incinerator EKA-230IG

We offer optimal quality Industrial Garbage Incinerator that help in carrying out disposal of waste materials. Treated wastes might be industrial waste or domestic. These systems reduce combustible waste into exhaust gaseous products and the incombustible waste into ash. Our systems are capable of reducing the weight of the wastes to a fraction of their original weight.

Our clients can avail from us, optimal quality Industrial Incinerator that help in carrying out the complete combustion in the presence of fuel and air. The air provides oxygen for combustion and the fuel helps in providing heat energy to reach incineration temperature.

Features:
  • These are designed to conduct Incineration, which is a process of reduction of combustible waste into exhaust gaseous products and the incombustible waste into ash.
  • The combustion chamber temperature is considered the key parameter in an incinerator.
  • The standards for operation are cited in the Bio-Medical Waste (Management and Handling) rules, 2000.
  • To ensure that the air discharges meet the applicable regulatory requirements an Emission control equipment is required.
  • This equipment reduces the volume and weight by more than 95% thereby reducing the transportation and land disposal costs.


Specifications:
  • Material: Stainless steel.
  • Temperature: 300 C.
  • capacities: 5 kg/hr to 100 kg/hr.

Non Polluting Incinerator

Non Polluting Incinerator EKA-230NP

We are the leading manufacturers and suppliers of Non Polluting Incinerators. These are effective against all kinds of waste. These have been designed keeping in mind the standards set by the Pollution Control Board and their functioning does not result in the pollution of the environment. These are highly power efficient and have been manufactured using quality raw materials.

These Incinerators are used to incinerate different variety of solid, liquid waste generated from the fallowing sources, Hospitals, Blood bank, Pathological lab, Hotels, Food processing industries, Municipal Corporation, Animal Slaughter house, Pharmaceutical industries.

Specifications:
  • Material: Stainless steel.
  • Capacity: 20 to 100 kg/hr.

General Waste Incinerator

Item code: EKA-230BG

We offer General Waste Incinerator that are utilized for disposing off the waste in a hassle free manner. These have a standard capacity and involve little operational time. These heat up quickly to provide the temperature conditions required for the incineration process. They can be installed without much effort and require minimal maintenance. These have been priced as per standard market prices. The incinerator offered shall be designed to operate on Controlled Air Paralytic principal of combustion.

The inner connecting SS Piping consists of valve, NRV, strainer etc. including pipe fittings, flange, nuts & bolts, clamps pipeline support, painting etc. The Scrubbing liquid RE-Circulation Pump have suitable capacity. Our products also have FRP/Epoxy lined of suitable capacity complete with inlet, outlet drain, overflow, and fresh water connection, structural support, painting etc.

Type of Waste:
  • Paper, Garbage, Refuge, Rubber, Leather, Tyre, Rice Grass, Hotel/Resort Waste, Non-eatable Food, any other waste heaving some


Waste Categories:

Type A:
  • Trash, a mixture or highly Combustible waste such as paper, cardboard. Cartons. Wood boxes and combustible floor sweepings from commercial and industrial activities. The mixtures contain upto 10% by weight of plastic bags. Coated paper. Laminated paper. Treated corrugated cardboard. oily bags and plastic & rubber strips. Tit type of waste contains 20% moisture, 5% incombustible solids and has a heating value of 4700 Kcal per kg as fired

Type B:
  • Rubbish, a mixture of combustible waste such as paper. Cardboard cartons, wood foliage and combustible floor sweeping from domestic. Commercial and industrial activities. The mixture contains upto 20% by weight of restaurant or cafeteria waste, but contains lithe or no treated papers, plastic or rubber wastes. This type of waste contains 25% moisture, 10% incombustible solids and has a heating value of 3600 kcal, per kg as fired


Type C:
  • Refuse, consisting of an approximately even mixture of rubbish and garbage by weight. This type of waste is common to apartment and residential occupancy. Consisting of upto 70% moisture. 7% incombustible solids, and has a heating value of 2350 kcal per kg as fired


Type D:
  • Garbage, consisting of animal and vegetable wastes from restaurants, cafeterias, hotels, hospitals, markets and like installations. This type o waste contains upto 75% moisture. upto 5% incombustible sends and has a heating value 01140D kcal per kg as fired

 

Type E:
  • Human and animal remains, consisting of carcasses, organs and solid organic wastes from hospital and similar sources. consisting of upto 85% moisture. 5% incombustible solids, and having a heating value 01550 kcal per kg as Grad

 

Specification:
  • Thickness: 4 mm
  • HDPE tank: 100 Lts. capacity with stop cock for chemical storage
  • Induced Draft Fan Centrifugal: 2000 Nm3/Hr capacity
  • Head: 300 mm
  • Emergency water storage tank: 500 Ltr
  • Fuel: Electrical heater of 20 KW with automatic controls
  • Capacity: 15 to 20 kg/batch
  • Motor: 2 HP
  • MS Chimney thickness: 6 mm
  • MS sheet Dia at top: 150 mm
  • MS sheet Dia at bottom: 600-mm
  • Base plate thickness: 16 mm
  • Straight Chimney Dia: 150 mm x 600 mm
  • Straight Chimney Height: 30 mtr
  • Material: Mild Steel IS-6533
  • Collection Tank capacity: 1000 Lts

Bottle Incinerator

Item code: EKA-230BC

We are profound manufacturer and supplier of Bottle Incinerator that are compact and efficient, combining safety and ease of use with performance, functionality and reliability. Incinerator Bottle Crusher are used throughout the hospitality sector from Nightclubs to Bars to Hotels & Restaurants or any recycling operation.To save space, time and money the Incinerator Bottle Crusher is the solution.

Features:
  • Patents apply to the PEL Bottle Crusher
  • Reduce glass to cutlet size
  • Volume feed machine
  • Rated through-put: over two tonne per hour
  • Extraction system, filters fine dust created during crushing
  • Mobile for ease of movement
  • System used is low noise operation and highly energy efficient
  • Heavy duty construction
  • Small footprint Optional Extras
  • Auto-start and stop
  • Direct fed from bar
  • Galvanized body
  • Service contract


Specifications:
  • Power Supply: 220 to 230 V
  • Motor: 1.8 kW
  • Reduces bottle volume: 5:1

Glass Crusher

Item code: EKA-230GC1

We offer economical Glass Crusher to our customers. This is manufactured using quality components. To supply only, manually fed, light diesel fuel, domestic incinerator with a capacity of not less than 600 kW capable of burning solid waste & sludge simultaneously, complete with automatic burner, flue gas pipe expansion compensator, pre-fabricated flue gas duct, motorized flue gas damper, ID fan & drive, free standing stub chimney etc. These products reduce the bottles to 20% their original size to glass grains with out any sharp edges. Complete with motor control center & all safeties.

Specifications:
  • Voltage: 400 V
  • Phase: 3 Phase
  • Capacity: 800 Bottles per hour
  • Size: 700 X 660 X 400 mm
  • Daily service tank: 400 Lt.

Glass Waste Crusher

Item code: JKA-230GC2

We are manufacturer, supplier and exporter of a wide range ofGlass Waste Crusher which are compact and efficient, combining safety and ease of use with performance, functionality and reliability. Glass Crushers are used throughout the hospitality sector from Nightclubs to Bars to Hotels & Restaurants or any recycling operation. To save space, time and money the Glass Crusher is the solution.

Features:
  • Patents apply to the PEL Glass Crusher
  • Volume feed machine
  • Rated through-put: over two tonne per hour
  • Extraction system, filters fine dust created during crushing
  • Mobile for ease of movement
  • System used is low noise operation and highly energy efficient
  • Heavy duty construction
  • Small footprint Optional Extras
  • Auto-start and stop
  • Direct fed from bar
  • Galvanized body
  • Service contract

Specifications:
  • Material: Stainless steel
  • Height: 61"
  • Voltage: 220 V
  • Motor: 2 HP
  • Reduces bottle volume: 5:1

Additional Information:
  • Item Code: JKA-230GC2

Industrial Waste Incinerator

Item code: EKA-230IW

We are prominent manufacturers and suppliers of Industrial Waste Incinerator. These systems effectively dispose of industrial wastes without polluting the environment. Their process involves little time making them highly fuel efficient. They have been manufactured using standard materials and have a long shelf life. They have been economically priced. Smoke and fuel gases from the primary chamber are directed to re burn the smoke and fuel gases to ensure proper combustion in secondary chamber and consequently a complete smoke free operation so that there is no colour or smoke in the chimney. It shall be designed to have a complete destruction of the flue gases. Where fresh air in induced to lower the temp. of the flue gases to avoid formation of the gases to enable heavier fly ash particle settle down. A blower is provided for this application.

Features:
  • Supported with supporting structure made from IS structural section Material
  • It shall be sturdy to with stand any stress or stain formed during the operation


Specifications:

Primary Chamber:
  • Type: Dual chamber Primary chamber
  • Dia: 800 mm
  • Height: 1500 mm
  • Material of construction: Other body made from IS 2062 quality plate
  • Material: Mild steel
  • Thickness: 6 mm
  • Total thickness of insulation: 230 mm
  • Operating temp. (Primary chamber): 800 ± 50 deg.C
  • Operating temp. (Secondary chamber): 1050 ± 50 deg.C


Secondary Chamber:
  • Dia: 900 mm
  • Height: 1500 mm
  • Retention tune: 2 seconds
  • Temp. of outer body of the chamber: Shall not exceed 35 deg. c. or above

Home Waste Incinerator

Item code: EKA-230K

We offer Home Waste Incinerator that are utilized for disposing off the waste of kitchen. It can be installed without much effort, require minimal maintenance. The new innovation is industrial, incinerators which have a number of advantages like they can run with the help of electric power, oil or gas.
SpecificationU.S StandardMetric System
Length55" (69" With Cremation Burner)1.3 m (1.7 m with Cremation Burner)
Width40" (54" With Control Panel)1.0 m (1.3 m with Control Panel)
Height65" (75" With Afterburner)1.6 m (1.9 m with Afterburner)
Weight5,200 lbs.2,358 Kg
Gas PressureNatural Gas 7" W.C./Propane Gas 11" W.C.Natural Gas 1.7 kPa W.C.
Propane 2.7 kPa W.C.
Power Requirements110 V, Single Phase, 30 AMPS----
Incineration Rate50 lbs/H22 Kg/H
Weight Capability200 lbs90 Kg
Stack Height From GradeMinimum 154.5 m
Stack Sections18" O.D 4 1/2" Firebrick Walls/Cast-able Refractory Lining/(Hearth and Ceiling)0.4 m O.D
Refractory/Insulation3" 1900 - Board Insulation0.11 m Firebrick Walls /Cast-able Refractory Lining (Hearth and Ceiling)
0.07 m 1900 - Board Insulation
Chamber DimensionsLength: 32"0.8 m
Width: 26"0.6 m
Height: 25"0.6 m
12 Cubic Feet0.288 Cubic Meters
Burner outputMax Input Rating 750,000 BTU's per hour/Afterburner Max 400,000 BTU's per hour/Modulation Min 100,000 BTU's per hour/Cremation Burner 350,000 BTU's per hour791,250 KJ per hour/422,000 KJ per H/105,500 KJ per hour369,250 KJ per hour
Air RequirementsOutside air inlet louvers in the room /located at or below burner height, capable of passing 2,500 CFM of free airOutside air inlet louvers in the room located at or below burner height, capable of passing 1.173 Cubic meters per second

Liquid Waste Incinerator

Item code: EKA-230LW

We are prominent manufacturers and suppliers of high quality Liquid Waste Incinerator. These incineration systems assure safe disposal of all types of liquid wastes. These products are manufactured using optimum quality raw materials that are sourced from reliable vendors. These products are designed to be compatible with a wide range of fuels. These are known for high efficiency, long service life and requiring minimal maintenance. These products can be customized as per the requirements of our clients.

Specifications:
  • Capacity: up to 5000. Ltr/hr
  • Fuel: LDO/HSD/Gas/Coal
  • Material: Mild Steel

Liquid Incinerator System

Item code: EKA-230L

We are among the leading manufacturers and suppliers of Liquid Incinerator System. These products are used for liquid waste disposal and they have been manufactured keeping in mind the emission standards. These products are manufactured using optimum quality raw materials. These products can be customized as per requirements. Our liquid waste incinerators are running successfully in many companies. These products are offered at standard market prices.

We design the Incinerators with different fuel for Incineration of your Liquid Waste. LDO, , HSD, Diesel, FO (Furnace Oil), LPG, CNG Natural Gas, Etc. can be used as Fuel of our Liquid Waste Incinerators. Our design is proven and running successfully in many companies. Please contact us for Low Fuel/Fuel Efficient Liquid Waste Incineration System.

Features:
  • Primary Chamber with 1 fully Auto and 1 Manual Burner assembly (With fire proof Bricks Lining
  • Secondary Chamber with Automatic Burner (With Fire Proof Bricks Lining)
  • Venture Scrubber with SS Shower
  • Scrubber with SS Shower for Wet Scrubbing
  • ID Fan with SS Impellers
  • Chimney with Ladder, Platform & Sampling Point
  • Duct Line with Inside Lining
  • Heavy Construction for Long Life
  • Special Design as per your Liquid Waste and as per your required capacity
  • Liquid Waste Disposal/Incineration as per Emission Standard


Specifications:
  • Capacity: 10 Liters Per Hour to 5000 Liters Per Hour
  • Material: Stainless steel
  • Temperature: 100 C to 300 C

Sanitary Napkin Incinerator

Item code: EKA-230N

We offer Sanitary Napkin Incinerator which is used for hygienic disposal of sanitary napkins. It has an automated function, whereby, it can switch off automatically after the incineration process gets over. It’s inside surface has been created using high grade stainless steel. It comprises of a tray for the collection of ashes. The process takes very little time, making it highly energy efficient.

Features:
  • Instant disposal of used Napkins in a very scientific and hygienic way
  • Front Opening Door with Automatic Door Closer
  • Inside SS covering for maximum lifetime, Outside Mild Steel Metallic Spray Painting
  • The ash is collected in an Ash Collection tray
  • Just Start and Forget
  • It Burns and Stops Automatically
  • Specially designed to destroy upto 20 napkins at a time
  • Complete burning of napkins only less than 5% ash per Napkin is generated
  • Fully Automatic and Electrically operated

Accessory:
  • Ceramic insulation for external thermal protection
  • Auto thermal cut off for safety of user
  • Having an emission outlet outside the room for the fumes developed during the incineration
  • Temperature and Timer display
  • Tripper for Emergency Power shutdown

Specification:
  • Loading Capacity: Approximately 200 napkins per day
  • Duration to destroy: Upto 15 minutes for 10 Napkins
  • Material: Stainless steel

Napkin Incinerator with Scrubber

Item code: EKA-230NS

We are leading manufacturers and suppliers of Napkin Incinerator with Scrubber. These are automated machines that switch off by themselves once the process gets over. The process takes very little time and results in a residue which is barely five percent of the input. The scrubber filters the exhaust stream. It is electronically operated and is highly power efficient. The machine is designed to provide long term service.

Features:
  • Instant disposal of used Napkins in a very scientific and hygienic way
  • Front Opening Door with Automatic Door Closer
  • Inside SS covering for maximum lifetime, outside Mild Steel Metallic Spray Painting
  • The ash is collected in an Ash Collection tray
  • Just Start and Forget
  • It Burns and Stops Automatically
  • Complete burning of napkins only less than 5% ash per Napkin is Generated
  • Specially designed to destroy upto 20 napkins at a time

Applications:

  • Medical colleges Hospitals Nursing homes Institutions
  • Camp wastes Municipal wastes Girls Hostels Resorts/Hotels Malls/Shopping centers Girls colleges Colonies

Accessories for Safety Purpose:

  • Ceramic insulation for external thermal protection
  • Auto thermal cut off for safety of user
  • Having an emission outlet outside the room for the fumes
  • Developed during the incineration
  • Temperature and Timer display
  • Tripper for Emergency Power shutdown
  • Robust construction
  • Virtually smoke and smell free
  • High temperature refractory lining
  • Quick heat up time and lesser operational time
  • Easy installation
  • Trouble free operation and maintenance
  • Designed to meet standards of central Pollution Control Board (CPCB)

Construction with scrubber:

  • Chamber in incinerators is built as per guidelines of CPCB
  • For large installations provided air Pollution control Device (APCD) like wet scrubbers
  • The body is made of steel and lined with high temperature Refractory that make our Incinerators robust and trouble free for longer life
  • The construction is modular and individual components are easily assembled at site

Specifications:

  • Process: Fully Automatic and Electrically operated
  • Loading Capacity: Approximately 200 napkins per day
  • Duration to Destroy: Upto 15 minutes for 10 Napkins



    Sanitary Pad Incinerator

    Item code: EKA-230NN

    We are manufacturer, supplier and exporter of a wide range ofSanitary Pad Incinerator. Nano is the smallest Sanitary Napkin Incinerator in India. Nano Sanitary Napkin Incinerator is an Automatic Sanitary Napkin Destroyer manufactured with a high rate of reliability proven through performance. It is the best solution for sanitary napkin disposing needs wherein the used napkins are converted into a sterile ash. It helps to instant disposal of a used napkins in a very Scientific and Hygienic Way. Having an emission outlet outside the room for the fumes developed during the incineration. These products are very compact and can be fixed on the wall with easy installation for the convenient use in the Toilets. For the safety purpose our products consists of ceramic insulation for external thermal protection.

    Features:
    • Instant disposal of used Napkins in a very scientific and hygienic way
    • Top Sliding Door for easy operation
    • Low Weight for Easy and convenient to install inside the toilet and Wall Mountable
    • Inside SS covering for maximum lifetime, Outside Mild Steel Metallic Spray Painting
    • The ash is collected in an Ash Collection tray or flush into drain through ash removal pipe (Nano+)at the bottom of the Incinerator
    • Just Start and Forget
    • It Burns and Stops Automatically.Complete burning of napkins only less than 5% ash per Napkin is generated
    • Fully Automatic and Electrically operated
    • Auto thermal cut off for safety of user


    Applications:
    • Public Toilets, School Girls Toilets, Colleges Ladies Toilet
    • Common in Ladies Hostels
    • Common Unit for Apartments
    • Toilets of Railway Stations
    • Toilets of Air Ports
    • Toilets of Bus Stops
    • All The Rooms of Hotel
    • Wash Rooms of Public Halls
    • Refreshment of Shopping Malls
    • Toilets of Club Houses
    • Washrooms of Restaurants
    • Refreshment area of Cinemas
    • Washrooms at Corporate Offices
    • Toilets of Factories where ladies are working
    • Toilets of Library
    • Toilets of Individual Bungalow
    • Toilets of Offices and many more places


    Specifications:
    • Loading Capacity: Approximately 100 napkins per day
    • Size in inches (H x W x D): 13 x 13 x 9
    • Duration to destroy: Approximately upto 10 minutes for 5 Napkins
    • Insulation: Ceramic insulation

    Oil Fired Incinerator

    Item code: EKA-230OF

    We offer high quality Oil Fired Incinerator to our valuable customers. These incinerators have automatic solid waste feeding and ash removal systems, which are highly appreciated by our clients. These products can be customized as per the requirements of our clients. These products also have liquid waste feeding systems for automatic feeding of liquids. These products are manufactured using latest technology and advanced machinery.

    Our clients can avail from us an extensive gamut of Oil Fired Incinerator. We have designed and developed the offered products in different sizes and specifications suited to the divergent demands of the clients. Furthermore, our clients can avail the offered products in both customized and standard forms as per their requirement.

    Optional accessories offered:
    • Automatic solid waste feeding and ash removal systems
    • Liquid waste feeding systems for automatic feeding of liquids
    • Continuous emission monitoring and recording systems
    • Heat recovery systems

    Features:
    • Conforms to national & international pollution norms CPCB, USEPA & EU
    • Suitable for a wide range of wastes
    • Auxiliary fuel option of oil or gas
    • Ce certified burners sourced from Europe
    • Fully automatic, safe and easy to use
    • PlC based control panel
    • Cast-able and joint less refractory ensures longer life and durability
    • Packaged range of incinerators are shop assembled, plug ‘n’ play type, ready for instant use, require minimum site work and space for installation
    • Equipped with ample number of safety interlocks
    • The controlling system is foolproof and cannot be tampered with thus ensuring that none of the safety interlocks and operating procedures are bypassed
    • The motors in the system are operated by VFDS which not only prolong their life but also reduce the energy consumption


    Specifications:
    • Combustion efficiency: 99%
    • Material: MS Steel
    • Temperature: 50 C to 300 C

    Poultry Incinerators

    Item code: EKA-230P1

    We offer high quality Poultry Incinerators to our esteemed customers. These products are designed for large scale, municipal waste destruction. These products are offered at standard market prices. These products are manufactured using finest quality raw materials. These products have effective solid hearth to enable maximum burnout. These products are designed to work with a wide range of fuels. These products are manufactured using latest technology and advanced machinery, to ensure high standards of quality.

    This a Large incinerator and was designed for large scale and municipal waste destruction The unit has a 2.4 cubic meter combustion chamber, with a full top door for easy loading. The large secondary chamber provides a post combustion afterburner to provide a 2 second gas residence time at high temperatures to ensure that all gases are re-burn in the chamber. The whole unit is a 3 mm steel shell with a 8 to 10 cm thick refractory lining which keeps the heat inside the chamber whilst allowing cool walls on the outside.

    Features:
    • Low running and maintenance costs
    • Automatic and simple to operate control panel
    • Incineration Temperatures up to 800 deg. C
    • 5 mm Steel Casing and Fully insulated
    • Dense Refractory Concrete Lining Rated to 1600 degrees C
    • Solid Hearth to Allow Maximum Burnout
    • Stainless Steel Flue as standard
    • CE Marking
    • Heat Recovery System option
    • Easy on site installation

    Specifications:
    FuelElectric, Diesel or Gas
    Capacity (Cubic Mtr)6
    Ave Capacity1500 kg
    Burn Rate (Average kg/ hr)500 kg
    Ash Residue3%
    Approx Incineration Time (Per load)2 hrs


    Operation:
    Max. Operating Temperature1200
    Residency Time in 2nd Chamber2 seconds
    Temperature MonitoringYes
    Thermostat controlYes
    Constant Running FanYes
    Secondary Combustion ChamberYes

    Chicken Waste Incinerator

    Product Details:
    • Automatic Grade: Automatic, Semi-Automatic, Manual
    • Waste Type: Hospital/Medical Waste, Animal Waste
    • Power Source: Electric, Diesel

    Item code: EKA-230P2

    We are one of the leading manufacturers and suppliers of high quality Chicken Waste Incinerator. These products are uniquely designed to ensure total burnout of solid and liquid wastes. These products are designed to work with a wide range of fuels such as LPG, natural gas, and fuel oil. These products undergo various quality tests at each level of production, to ensure high standards of quality.

    Being one of the most leading and prime companies in this line of work, we are availing our clients with one of the most exclusive kinds of poultry waste incinerators. These poultry waste incinerators are the giant machinery equipments which helps heat up and burn the waste items and degrade them to prevent any kind of pollution and Unhygienic. These poultry waste incinerators have been designed and constructed in most appropriate manner at our company which serves well for easy and quick incineration.

    Features:
    • Concave refractory bottom specifically designed to insure burnout and total destruction of solid and liquid wastes
    • Insulated, refractory-lined chambers and stacks for durability, energy retention, and emissions control
    • Secondary chamber with burner available
    • Factory assembled, aluminized steel jacket lined with high temperature refractory
    • High temperature refractory lined chamber walls
    • Factory cured chambers and stacks
    • Assembly on-site can be done with common farm equipment
    • Counter-balanced fill door
    • Manual set burn time and automatic shut off
    • Choice of fuels: LP, Natural Gas, or Fuel Oil
    • Burn times are adjustable by operator to meet varying loads
    • Stack Test Data available on many models
    • We provide permit and compliance assistance at no cost

    Specifications:
    FuelElectric, Diesel or Gas
    Capacity (Cubic Mtr)2.5
    Ave Capacity25 to 200 kg
    Burn Rate (Average kgs/hr)25 kg
    Ash Residue3%
    Approx Incineration Time (Per load)3 hrs


    Operation:
    Max. Operating Temperature1200
    Residency Time in 2nd Chamber2 seconds
    Temperature MonitoringYes
    Thermostat ControlYes
    Constant Running FanYes
    Secondary Combustion ChamberYes

    Poultry Incinerator

    Item code: EKA-230E1

    The INCINERATOR is our one of recent developments; initially it was designed to meet the requirements of the medical colleges and small hospitals to dispose off their bio-medical waste in an eco friendly manner. Because of the need of the hygeinic conditions and fresh environment the need of incinerator is growing in all the sectors.
    These incinerators are built to meet the need of our customers to improve the pollution in the environment by hazarduous solid waste and many other waste products. The incinerators reduces most combustible solid wastes to nearly 2 -3 percent by volume and 5 percent by weight.
    The new innovation is municipals, poultry (birds and animals) incinerators which have a number of advantages like they can run with the help of electric power, oil or gas. They are fully automatic. Our designers can design and can build much larger incinerators to meet the requirements of municipal waste, kitchen waste etc.

    TECHNICAL SPECIFICATIONS:
    • Process : Fully Automatic and Electrically operated
    • Loading Capacity : Approximately 500kg. per day
    • Duration to destroy: Upto 15 -25 Birds per hour.

    • Accessories for safety purpose:
    1. Ceramic insulation for external thermal protection.
    2. Auto thermal cut off for safety of user.
    3. Having an emission outlet outside the room for the fumes developed during the incineration.
    4. Temperature and Timer display.
    5. Tripper for Emergency Power shutdown.

    Key features of our incinerators are :
    • Robust construction.
    • Virtually smoke and smell free with secondary burners.
    • High temperature refractory lining.
    • Quick heat up time and lesser operational time.
    • Easy installation.
    • Trouble free operation and maintenance, our mechanics are available on call.
    • Designed to meet standards of Central Pollution Control Board (CPCB) Delhi.
    • Can be made for oil, gas or electrically fueled.

    Rotary Kiln Incinerator

    Item code: EKA-230RK

    We offer optimal quality Rotary Kiln Incinerator that help in carrying out disposal of waste materials. Treated wastes might be industrial waste or domestic. These systems reduce combustible waste into exhaust gaseous products and the incombustible waste into ash. Our systems are capable of reducing the weight of the wastes to a fraction of their original weight. Our products are duly lined with high grade cast-able cement and fitted with high quality gaskets to seal the doors when closed. And limit switch will be provided.

    Features:
    • Ash removal doors are provided in the primary, secondary and settling chambers
    • Separate floor mounted weatherproof control panel housing operation in automatic control switches, digital type temp. controller for primary and secondary chamber
    • Temp. indicator for Scrubber and stack ON/OFF switches, fuses, sensors, hooter etc. complete with in all respect-duly lined with refractory materials and fitted with high quality packing to seal the door

    Specifications:
    • Centrifugal Capacity: 500 m³/Hr
    • Static pressure: 100 mm WC
    • HP: 1 HP
    • Material: Mild Steel
    • Duct line: 4 mm thick
    • Inside portion: 25 mm thick
    • Dia: 400 mm
    • Maintenance door: 5 mm thick

    Kitchen Waste Incinerator for Kitchen Waste

    Kitchen Waste Incinerator for Kitchen Waste EKA-230KW

    We are offering wide range of Kitchen Waste Incinerator for Kitchen Waste.

    Following are the Kitchen Waste Incinerator for Kitchen Waste offered by us:
    • Kitchen Waste Incinerator

    We offer Kitchen Waste Incinerator that are utilized for disposing off the waste of kitchen. It can be installed without much effort, require minimal maintenance. The new innovation is industrial, incinerators which have a number of advantages like they can run with the help of electric power, oil or gas.

    SpecificationU.S StandardMetric System
    Length55" (69" With Cremation Burner)1.3 m (1.7m with Cremation Burner)
    Width40" (54" With Control Panel)1.0 m (1.3 m with Control Panel)
    Height65" (75" With Afterburner)1.6 m (1.9 m with Afterburner)
    Weight5,200 lbs.2,358 Kg
    Gas PressureNatural Gas 7" W.C./Propane Gas 11" W.C.Natural Gas 1.7 kPa W.C.
    Propane 2.7 kPa W.C.
    Power Requirements110 V, Single Phase, 30 AMPS----
    Incineration Rate50 lbs/hour22 Kg/hour
    Weight Capability200 lbs90 Kg
    Stack Height From GradeMinimum 15'4.5 m
    Stack Sections18" O.D 4 1/2" Firebrick Walls/Cast-able Refractory Lining/(Hearth and Ceiling)0.4 m O.D
    Refractory/Insulation3" 1900 - Board Insulation0.11 m Firebrick Walls /Cast-able Refractory Lining (Hearth and Ceiling)
    0.07 m 1900 - Board Insulation
    Chamber DimensionsLength: 32"0.8 m
    Width: 26"0.6 m
    Height: 25"0.6 m
    12 Cubic Feet0.288 Cubic Meters
    Burner outputMaximum Input Rating 750,000 BTU's per hour/Afterburner Maximum 400,000 BTU's per hour/Modulation Minimum 100,000 BTU's per hour/Cremation Burner 350,000 BTU's per hour791,250 KJ per hour/422,000 KJ per hour/105,500 KJ per hour369,250 KJ per hour
    Air RequirementsOutside air inlet louvers in the room /located at or below burner height, capable of passing 2,500 CFM of free airOutside air inlet louvers in the room located at or below burner height, capable of passing 1.173 Cubic meters per second

    Bio Medical Waste Incinerator for Hospital Waste

    Bio Medical Waste Incinerator for Hospital Waste EKA-230BI

    We are offering wide range of Bio Medical Waste Incinerator for Hospital Waste.

    Following are the Bio Medical Waste Incinerator for Hospital Waste offered by us:
    • Bio Medical Waste Incinerator.
    • Electronic Bio Waste Medical Incinerator.
    • Bio Waste Oil Fired Medical Incinerator.

     

    Features:

    • Robust construction
    • Virtually smoke and smell free with secondary burners
    • High temperature refractory lining
    • Quick heat up time and lesser operational time
    • Easy installation
    • Trouble free operation and maintenance
    • Designed to meet standards of central Pollution Control Board (CPCB)
    • Available in oil, gas or electrically fueled

    Our incinerators have following components:
    • Primary Chamber
    • Secondary Chamber
    • Air Blowers
    • Burners or electric heating elements
    • Feeding Door
    • Ash collection pit with ash tray (optional)
    • Chimney

    Construction without scrubber:
    • Chamber in incinerators is built as per guidelines of CPCB
    • The body is made of steel and lined with high temperature Refractory that make our Incinerators robust and trouble free for longer life
    • The construction is modular and individual components are easily assembled at site

    Applications:
    • Medical colleges Catering wastes Resorts/Hotels Poultry
    • Hospitals
    • Nursing homes Institutions
    • Industrial wastes Camp wastes Municipal wastes Malls/Shopping centers
    • Animal farms like sheep kennels

    Specifications:
    • Temperatures: 1000 °C
    • Material: Stainless steel
    • Burn rate: 18 to 20 kg/hr

    Electrical Incinerator for Industrial Waste

    Electrical Incinerator for Industrial Waste EKA-230EI

    We are offering wide range of Electrical Incinerator for Industrial Waste.

    Following are the Electrical Incinerator for Industrial Waste offered by us:

    • Electrical Incinerator with Venturi Scrubber.
    • Electrical Incinerator.
    • Electrical Incinerator with Scrubber.

     

    Features:

    • Robust construction.
    • Virtually smoke and smell free with secondary burners. High temperature refractory lining.
    • Quick heat up time and lesser operational time.
    • Easy installation.
    • Trouble free operation and maintenance.
    • Designed to meet standards of central Pollution Control Board (CPCB).

    Specifications:

    • Capacity: 15 to 20 kg.
    • Material: Stainless steel.

    Waste Incinerator for Municipality Waste

    Waste Incinerator for Municipality Waste EKA-230WM

    We are offering wide range of Waste Incinerator for Municipality Waste.

    Following are the Waste Incinerator for Municipality Waste offered by us:
    • Municipal Waste Incinerator.
    • Municipal Solid Waste Incinerator.
    • Solid Waste Incinerators.
    • Hazardous Waste Incinerator.
    • Hospital Waste Incinerators.
    • Plastic Waste Shredder.
    • Chemical Waste Incinerator.


    Features:
    • Primary Chamber with Fully Automatic Burner Assembly (With Fire Proof Bricks Lining).
    • Secondary Chamber with Automatic Burner (With Fire Proof Bricks Lining).
    • Automatic Waste Feeding System, with Hydraulic Power Pack.
    • Venture Scrubber with SS Shower.
    • Scrubber with SS Shower for Wet Scrubbing.
    • ID Fan with SS Impellers.
    • Chimney with Ladder, Platform & Sampling point.
    • Duct Line with Inside Lining.
    • Heavy Construction for Long Life.
    • Special Design as per your Liquid Waste and as per your Required Capacity.
    • Incineration as per Emission Standard.

    Specifications:

    • Dia: 600 mm.
    • Length: 2000 mm 1 Set.
    • Temperature: 300 C
    • Material: Stainless Steel 316L
    • Control SPM: <100 mg/Nm3 (max) & 99.9% S02
    • Capacity: 15 to 20 kg/batch

    Municipal Waste Incinerator

    Item code: EKA-230MW

    We are one of the leading manufacturers and suppliers of high quality of Municipal Waste Incinerator. These waste incinerators are used to dispose food waste, plastics, glass, metal, stones, agro waste, cotton waste, liquid, solid, and semi-solid waste. These incinerators can be customized as per requirements depending upon the required capacity and the kind of waste. These products are highly appreciated for their automatic waste feeding system with hydraulic power pack.

    We provide fuel efficient technology for low cost waste burning. When you want to manage a very large quantity of waste, the question of heat recovery, municipal waste refuse derived fuel plant, fuel pellets, municipal waste compost plants (waste to compost plant), bio gas plant, methane gas & electricity generation plant, power generation with incineration, etc. is very natural. We also provide such waste management services as per the requirements.

    Features:
    • Primary Chamber with Fully Automatic Burner Assembly (With Fire Proof Bricks Lining)
    • Secondary Chamber with Automatic Burner (With Fire Proof Bricks Lining)
    • Automatic Waste Feeding System, with Hydraulic Power Pack
    • Venture Scrubber with SS Shower
    • Scrubber with SS Shower for Wet Scrubbing
    • ID Fan with SS Impellers
    • Chimney with Ladder, Platform & Sampling point
    • Duct Line with Inside Lining
    • Heavy Construction for Long Life
    • Special Design as per your Liquid Waste and as per your Required Capacity
    • Incineration as per Emission Standard


    Specifications:
    • Capacity: 100 kg/hr to 5000 kg/hr
    • Material: Stainless steel

    Mobile Incinerator

    Item code: ET-171A

    A mobile incinerator is an incineration system mounted on a semi-trailer. Modern incinerators enable complete and sterile incineration of waste. They can be operated virtually anywhere.

    A modern mobile incinerator unit (MIU) is capable of incinerating waste at a temperature of up to 1,200 °C (2,192 °F). This means, it is designed to incinerate all kinds of waste as well as infected hazardous waste. This satisfies the requirement that, waste of hospitals and health facilities must be burnt at a minimum temperature of 1,100 °C (2,012 °F) acc. to the rules of environmental protection. It can also be used to dispose of household waste, as a measure of environment protection.
    Mobile incinerators provide a useful addition to the available standards in waste management.

    The elimination of hazardous and toxic waste on site is one of the major uses of mobile incinerators.

    A mobile incinerator unit is the most suitable product for countries that are starting to tackle waste management, because in such cases, there are no previous statistics about the amount of waste and its composition. Therefore all initial data is based on assumptions only. Until more accurate data can be collected, mobile incinerator units help make the transition, with their mobility and flexibility.

    Additional Information:
    • Item Code: ET-171A
    Looking for Incinerators ?
    © Edutek Instrumentation
     
    Desktop Site Back to top