Laboratory Instrument

Bacteriological Incubator

Bacteriological Incubator (Memmert type)

Model No : ET-11977
Has a st andard double walled construction. Inner chamber made of aluminium or stainless steel sheet and outer made of mild steel sheet finished in powder coated colour combinations. Gap filled with glass wool for temp. Insulation. Double walled door with double glass window for observation in the chamber.

Temperature range 5°C above ambient to 800C ±10C controlled by a thermostat. L-shaped thermometer provided along with pilot lamps, on-off switch temp. Control knob etc. It works on 220V AC50Hz single phase.

Chamber sizes in mms : 

  • 300 x 300 x 300
  • 355 x 355 x 355
  • 455 x 455 x 455
  • 455 x 605 x 455
  • 605 x 605 x 455
  • 605 x 605 x 605
  • 605 x 910 x 605


Optional:-

  • Air circulating fan
  • Timer 24 hours
  • Digital temp. Controller-cum-indicator
  • Digital temp. indicator-cum-controller with computer data logger.


Note : Oven & incubator sizes not covered can be fabricated on demand.


Additional Information:
  • Item Code: ET-11977

Vertical Autoclaves

Vertical Autoclaves :
Item code: ET-11968

A versatile electrically heated sterilizer under saturated steam of adjustable pressure of 10 to 20 psi. Double walled construction with boiler made of stainless steel, outer shell made of mild steel or stainless steel sheet. The lid is made of stainless steel or gun-metal plate, tightening allround with wing nuts.

Gasket made of molded joint-less Neoprene rubber. Equipped with water level arrangement, pressure gauge, air/steam release cock, spring loaded safety valve adjustable to any selected point from 10psi to 20 psi, accuracy ± 3 psi and drain, cord-plug etc.; to work on220V AC 50Hz single phase.

Dia x Depth SizeLtr(Approx.)Wattage
a)250x450mm (10"x18")22 Ltrs2KW
b)300x500mm (12"x20".)35 Ltrs3KW
c)350x550mm (14"x22")50 Ltrs4KW
d)450x600mm (18"x24".)95 Ltrs5KW
e)550x750mm (22"x30")178 Ltrs6KW
Optional Accessories :
  • Automatic low water level cut-off device
  • Pressure control switch
  • Radial lock
  • Pedal lift
  • Stainless Steel basket
  • Timer

Note
: Models are provided with pedal lifting device.

Additional Information:
  • Item Code: ET-11968

Autoclave Horizontal

Item code: ET-11973

Inner chamber jacket and boiler is made of stainless steel. Sterilization cycle is controlled by three way valve or multi port valve stainless steel. It is fitted with automatic pressure control switch, indfoss piezostat, safety valve, pressure gauge, pressure release valve, water level indicator with cord & plug. Lid is made of mild steel lined with S.S. duly polished. Size

Dia x DepthLoad
400 x 600mm5 KW
500 x 900mm8 KW
550 x 750mm8 KW
400 x 1100mm10 KW
500 x 1200mm10 KW

Optional accessories :

  • Pressure gauge
  • Compound gauge
  • Automatic low water level cut-off device
  • Pressure control switch

Additional Information:
  • Item Code: ET-11973

Laboratory Autoclave (Portable)

Item code: ET-11971

Features of :

  • All stainless Steel / Aluminum, seamless, vertical, having no joints
  • Pressure range: 15 psi to 18 psi
  • Chamber size: Diameter x Height in mms:
(a) 300 x 300
(b) 300 x 375

    Additional Information:
    • Item Code: ET-11971

    Rectangular Water Bath

    Rectangular Water Bath (Thermostatic Control) :
    Item code: ET-11402

    Double walled construction. Inner chamber of stainless steel sheet and outer of mild steel sheet duly finished in powder coated. The gap is filled with glass wool for temp. insulation. Temperature range 40°C above ambient to 100°C controlled by a thermostat. Complete with concentric rings, pilot lamp, plug cord etc. It works on 220V AC50Hz single phase.

    Technical Specifications:

    Chamber size in mms.No. of holes & Diameter
    300 x 250 x 1006 holes of 75mm dia.
    300 x 300 x 1009 holes of 75mm dia.
    405 x 300 x 10012 holes of 75mm dia.

    Optional Accessories :

    • Digital Temperature Indicator or indicator-cum-Controller

    Additional Information:
    • Item Code: ET-11402

    Serological Water Bath

    Serological Water Bath :Item code: ET-11997

     Construction of bath with a pyramidal type cover made of stainless steel. Temperature control by a thermostat5°C above ambient to 90°C ± 1°C. Complete with Temp. Control Knob, on-off switch, pilot lamps, cord-plug etc. It works on 220V AC 50Hz single phase.

    Chamber size in mmsLoad & No. of racks
    300 x 250 x 1751.0 KW for 2 racks
    330 x 300 x 1751.5 KW for 4 racks
    405 x 300 x 1752.0 KW for 6 racks
    605 x 300 x 1753.0 KW for 8 racks


    Optional Accessories :
    • Stirrer with stainless steel rod & blades
    • Digital Temp. Indicator. or Indicator-cum-Controlle

      Additional Information:
      • Item Code: ET-11997

      Temperature and Precision Control Water Bath

      Temperature and Precision Control Water Bath :
      Item code: ET-11993

      Specifications of Water bath but temperature controlled by solid state controller with stirrer with S.S. rod & blade to make temp. of bath all-round uniform and constant. Chamber of stainless steel sheet.

      • Temperature range: 50°C above ambient to 100°C.
      • Chamber size : 430 x 240 x 265 mm

      High temperature oil bath :


      Chamber made of copper / stainless steel sheet. Temperature thermostatically controlled upto 150°C. Complete with high speed stirrer with speed controller.

      Chamber size : in mms.
      • 250 x 250 x 250
      • 300 x 300 x 250
      • 355 x 355 x 250

        Additional Information:
        • Item Code: ET-11993

        High Temperature Oil Bath

        High Temperature Oil Bath
        Item code: ET-12000 

        has a chamber made of copper/stainless steel sheet. Temperature thermostatically controlled upto 150 C. Complete with high speed stirrer with speed controller.

        Chamber size:
        • 250 x 250 x 250 mm
        • 300 x 300 x 250 mm
        • 355 x 355 x 250 mm

        Additional Information:
        • Item Code: ET-12000

        Refrigerated Water Bath

        Refrigerated Water Bath-Item code: ET-12002
        has a double walled construction, outer made of mild steel and inner chamber made of stainless steel sheet. Controlled by digital temperature controller with glass window for observation. Heating is achieved by immersion type heater temperature from 0°C to 90°C.

        Working Chamber : 500 x 250 x 250 mm.

        Optional :
        • Digital temp. indicator-cum-controller.
        • Digital temp. indicator-cum-controller with computer data logger.

        Additional Information:
        • Item Code: ET-12002
        • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

        Memmert Type Universal Oven

        Universal Oven (Memmert type) :

        Standard double walled construction. Inner chamber made of aluminum or stainless steel sheet. Exterior made of mild steel sheet finished in powder coated color combinations. Three sides heating provides uniform and quick temperature rise in range of 50°C to 250°C ± 2°C and is thermostatically controlled.

        Provided with 2 or 3 adjustable shelves. L-shaped thermometer is builtin. Complete with indicator pilot lamps, on-off switch, thermostat control knob, plug-cord etc. Workable on 220V AC 50Hzsingle phase.


        Available in following specifications:
        -

        Common Chamber sizes in mms.No. of trays
        300 x 300 x 3002
        355 x 355 x 3552
        455 x 455 x 4552
        455 x 605 x 4553
        605 x 605 x 6053
        910 x 605 x 4553
        910 x 605 x 6053

        Optional :

        • Air circulating fan
        • Timer 24 hours
        • Digital Temp. Indicator
        • Digital Temp. Indicator-cum-Controller

        Other Information

        • Packaging Details: These teknik ovens ar packed with the compressed foam triangle cutting at all the four corners, then stretched and then wrapped in bubble sheet, and then packed in sturdy virgin box, and again that box is packed with the compressed foam triangle cutting at all the four corners of the box and again packed in another virgin strength card board box. thus making it more convenient,easy, secured packed.

        Additional Information:
        • Item Code: ET-11666
        • Port of Dispatch: India

        Humidity Oven

        Humidity Oven/Humidity System(Stream) ET-11665 for Oven can be provided with humidity arrangement. Humidity is created by condensation of steam generated by heaters dipped in water. Humidity is controlled by imported humidistat from ambient to95% ± 3% RH.


        Common Chamber sizes in mms.No. of trays
        300 x 300 x 3002
        355 x 355 x 3552
        455 x 455 x 4552
        455 x 605 x 4553
        605 x 605 x 6053
        910 x 605 x 4553
        910 x 605 x 6053

        Optional :
        • Digital temp. indicator-cum-controller.
        • Digital temp. indicator-cum-controller with computer data logger.

          Additional Information:
          • Item Code: ET-11665

          Vacuum Oven

          Features for Vacuum Oven
          ET-12009

          Double walled construction. Inner round chamber made of stainless steel sheet. Outer made of Mild steel sheet. Gap filled with glass wool for Temp. insulation. temp.

           

          • Range50°C to 150°C ± 3°C.
          • Body capable of withstanding vacuum of 760mm.
          • Complete with temperature regulator, indicator lamp, on-off switch, cord-plug etc.
          • To work on 220V AC 50Hz single phase.
          • Without vacuum pump.
          • Chamber size in mms : diameter x depth.

          (i) 250 x 250

          (ii) 250 x 300

          (iii) 300 x 300


          Optional : Digital temperature indicator-cum-controller.


          Additional Information:
          • Item Code: ET-12009

          B.O.D. Incubator

          B.O.D. (Bio-chemical Oxygen Demand) Incubator (Low Temp.) :
          Item code: ET-11979
          Double walled construction. Inner chamber made of anodized aluminium sheet/stainless steel with self supports for wide range of shelf spacing. Supplied with two/three removable perforated shelves. Clear inner door of acrylic sheet allows inspection of material without disturbing chamber temperature. Outer double walled door is provided with magnetic gasket, lock & key and door operated lamp illumination. The cabinet is mounted on castors.

          Temperature is controlled by a micro processor digital temperature controller cum indicator from 5°C to 50°C ± 1°C. Inner air circulating system provided for uniform temperature in the whole chamber. A silent sealed compressor with protective devices along with fan cooled condensing coil are placed below the chamber for safe and efficient working.

          Control panel provided at top of cabinet has three indicator lamps for mains, heating & cooling, voltmeter, temp. controller, cord-plug etc. and equipment is workable on 220 V AC 50 Hz single phase.

          Note : Use of a suitable Voltage Stabilizer is essential.

           

           

          Size of chamber in mms (WxHxD)Capacity (cu ft.)
          500 x 800 x 4156.10
          565 x 865 x 55010.00
          650 x 900 x 55012.00
          700 x 900 x 65015.00

           


          Optional Arrangements Available :

          • Digital temp. indicator-cum-controller with computer data logger.
          • Thermo-hygro-graph.
          • Timer : 0-24 hrs.
          • Day/night cycle.
          • CO2 / Air mixture inlet nozzle.
          • Audio-visual alarm.
          • Automatic Voltage Stabilizer 3 KVA.


          Humidity System (Steam) for BOD Incubator : BOD Incubator can be provided with humidity arrangement. Humidity is created by condensation of steam generated by heaters dipped in water. Humidity is controlled by imported humidistat from ambient to 95% ± 3% RH.


          Additional Information:
          • Item Code: ET-11979

          Egg Incubator

          Egg Incubator
          Item code: ET-11980
          • Microprocessor Based, PID Digital Temperature Indicator-cum-controller.Double walled with outer chamber made of M.S. Sheet epoxy powder coated and Inner chamber made up of SS - 304 grade steel. A High grade glass wool insulation.
          • Temperature range: ambient to 40°C
          • Accuracy of /-.5°C
          • Humidity Controller.
          • Manual tilting device, Incubator door with glass window.Air ventilation, air circulation.
          • Power: 220 volts A.C., 50 Hz.
          • Door gasket: Neoprene rubber.

           

          Capacity

          • 50 eggs.
          • 100 eggs.
          • 200 eggs.
          • 250 eggs.

          Additional Information:
          • Item Code: ET-11980
          • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

          Water Bath Incubator Shaker

          Water Bath Incubator Shaker (Metabolic Shaking Incubator)
          Item code: ET-11996

          Temperature range from room temperature to 100°C, Thermostatic control with an accuracy of plus minus 0.5°C Double walled inside made of Stainless steel 304 Quality and outside Mild steel sheet painted in epoxy powder coating. Oscillating tray is riding on ball rollers. Oscillator speed range 40 to 140 strokes. Built-in L-shape thermometer. To work on 220/230 volts A.C. Shaking Tray size : Inside (Stainless Steel 304 Qlty.)

          Size of chamber in inchs (WxHxD)

          Capacity (KW)

          275 x 275 x 75mM

          6 Ltrs

          275 x 275 x 150mm

          12 Ltrs.

          405 x 300 x 150mm

          18 Ltrs.


            Additional Information:
            • Item Code: ET-11996

            Carbon Dioxide Incubator

            Carbon Dioxide Incubator :
            Item code: ET-11922

            Inner chamber measuring 45 x 71 x 45 cm. made of stainless steel sheet. A full view inner glass door is provided along with outer double walled door provided with magnetic gasket. Inlet nozzle for Carbon Dioxide or Air mixture is also provided. Temperature range 5°C above ambient to 60°C ± 2°C. Complete with pressure gauge, inlet/outlet of air/gas, cord plug etc. Workable on 220V AC 50Hz single phase.


            Optionals :

            • Air compressor
            • Carbon Dioxide cylinder with rubber pipes

            Additional Information:
            • Item Code: ET-11922

            Hybridization Incubator

            Hybridization Incubator:
            Item code: ET-11925

            Inside made of stainless steel temp. Range 5°C above ambient to 90°C. Temp. controlled by pid controller. This chamber has air circulating fan to ensure uniformity of temp. A carrier to hold bottles ( 6 number of 60 mm diameter x200 mm depth) can be easily placed on front of rotator mechanism any bottle can be taken out easily from the carrier. The carrier rotates with bottles parallel to the door at a variable speed of 2 to 16 RPM. Viewing glass window in the top allows inspection of the specimen inside the chamber.

              Additional Information:
              • Item Code: ET-11925

              Orbital Shaking Incubator

              Orbital Shaking Incubator:
              Item code: ET-12010
              Specially designed to have a combined operation of Incubation and shaking as well as integral shaker mechanism, eccentric orbital drive provides horizontal orbital motion agitation. Incubator is double walled. Exterior of mild steel finished in powder coated. Interior made of stainless steel. Chamber illumination with fluorescent light.

              Glass-wool insulation between the two walls. Temperature is controlled by Digital Display Temperature Controller cum Indicator. Forced air circulation is provided. The platform is mounted on heavy duty springs with lotus clamps and S.S. top. Speed is continuously variable from 50 to 250 RPM and displayed on a Digital Speed Meter (optional). It works on 220V AC 50Hz single phase.

              Temperature Range
              : Ambient 5°C to 600C

              CapacityFlasks
              250 ml9
              250 ml16
              250 ml25
              250 ml36
              500 ml9
              500 ml16
              500 ml25
              500 ml36


              Optional :
              • Digital Speed Meter
              • Digital Timer of 999 minutes
              • Digital temp. indicator-cum-controller.
              • Digital temp. indicator-cum-controller with computer data logger.

              Temperature range is 5°C to 60°C.

                Additional Information:
                • Item Code: ET-12010

                Stability Chamber Microprocessor Control

                Environmental Test Chamber / Growth Chamber / Stability Chamber Microprocessor Control ET-12075 :

                These are Microprocessor Controlled Chambers with soft touch keyboard for fast and accurate setting of various parameters. Just set the temp., humidity & time and the system runs automatically. All the parameters are digitally displayed and reproducible.


                Special Features:

                 

                • Temp. accurately controlled through microprocessor based controller
                • Automatic On / Off of the compressor according to need of process to reach & maintain the set values
                • Chamber illumination with fluorescent or ultra violet lights
                • Audio Visual alarm warning of temp. variation
                • User’s friendly Microprocessor Design/Operation


                Additional Features of Environmental Test Chambers :


                • Humidity accurately controlled through
                • microprocessor controller in addition to temperature
                • Direct display of humidity in % RHQ. Audio visual alarm warning of low water levels & door opening
                • Humidity : 40% to 95% ± 3%

                 

                Technical Data:

                CapacityTemperature Range
                170 lit. / 6 cft5°C to 60°C ± 1.0°C
                285 lit. / 10 cft5°C to 60°C ± 1.0°C
                340 lit. /12 cft5°C to 60°C ± 1.0°C
                170 lit. / 6 cftAmbient to 70°C ± 1.0°C
                285 lit. / 10 cft.
                Ambient to 70°C ± 1.0°C
                340 lit./ 12 cftAmbient to 70°C ± 1.0°C

                Optional:

                • Chart Recorder weekly
                • RS-232C interface available for humidity control through personal computer
                • Digital temp. indicator-cum-controller with computer data logger
                • Cyclic timer for regulating illumination conditions
                • Automatic Voltage Stabilizer 3 KVA

                Additional Information:
                • Item Code: ET-12075

                Walk In Incubator

                Item code: ET-11926
                Designed for vast number of incubation applications. Can be installed even in hallway room or wherever convenient. Design feature includes enameled mild steel sheet exterior, aluminum /stainless steel, interior ventilators, internal lighting, exhaust fan etc. Suitable insulated 300 mm sq. Inspection window at the door permits inside view with -out opening the door. Complete with panel. Pre fabricated at factory assembled at site. Complete with cord and plug to work on 220 V single phase 50 Hz power supply. Temperature range from 5º C above ambient to 60º C ± 1º C. Controlled by digital indicator cum controller.

                Available sizes
                W x H x D
                a) 1.2x2.3x1.2 meter
                b) 2.3x2.3x2.3 meter

                Walk-In- Incubator -JEQ-W2

                Same as JEQ-11W but with controlled humidity up to 95% ± 5%

                Available sizes
                W x H x D
                a) 1.2x2.3x1.2 meter
                b) 2.3x2.3x2.3 meter

                Walk-In- Incubator -JEQ-W3

                Same as JEQ-11W but temperature range 10º C to 60º C.

                Available sizes
                W x H x D
                a) 1.2x2.3x1.2 meter
                B) 2.3x2.3x2.3 meter

                Optional :

                • Digital temp. indicator-cum-controller with computer data logger

                Additional Information:
                • Item Code: ET-11926

                Seed Germinator Single Chamber

                Seed Germinator Single Chamber :
                Item code: ET-12073

                Suitable for conducting various experiments on seed germination. Different environmental conditions can be created and controlled as per requirement. Double walled construction, inner made of anodized aluminium or stainless steel sheet and outer made of mild steel sheet duly finished in powder coated paint. Temperature range 5°C above ambient to50°C ± 1°C controlled by Digital Indicator & Controller.

                 

                Humidity is created in a stainless steel chamber by heating water by an immersion heater from ambient to 95% ± 3% RH controlled by a humidistat.

                 

                A full - view inner acrylic door and double walled outer door with magnetic gaskets is provided. Inner chamber is provided with fluorescent illumination to create photo-stimulation. An air-circulating fan has been provided to maintain uniform temperature in the total chamber.

                 

                Supplied complete with 14 adjustable perforated trays, pilot lamps, on-off switch other control switches, cord plug to work on 220V AC50Hz single phase.


                Chamber size :

                • 555(W) x 910(H) x 650(D) mms.
                • 710(W) x 455(H) x 455(D) mms.

                Optional :

                • Digital temp. indicator-cum-controller with computer data logger

                  Additional Information:
                  • Item Code: ET-12073

                  Seed Germinator Double Chamber

                  Seed Germinator Double Chamber
                  Item code: ET-12074
                  has specifications same as double chamber and also consists of following points:-

                  • Each chamber size : 555 (W) x 910 (H) x 605 (D) mm.
                  • For cooling (Low temp.) 5°C to 50°C ± 1°C a sealed compressor unit has been provided to work independently below the chamber.

                  Optionals :

                  • Digital temp. indicator-cum-controller with computer data logger
                  • Automatic 0-24 hrs
                  • Timer to regulate cyclic illumination conditions
                  • Chart recorder
                  • Automatic voltage stabilizer - 3 KVA (Must)

                    Additional Information:
                    • Item Code: ET-12074
                    • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

                    Plant Growth Chamber

                    Plant Growth Chamber
                    Item code: ET-12072

                    is a useful to conduct experiments on plant growth in certain controlled environmental conditions. Double walled construction, inner made of anodized aluminum or stainless steel sheet and outer made of mild steel sheet duly finished in powder coated.

                    In addition to a double walled outer door. A full-view clear acrylic door has been provided for inspection of material without disturbing chamber conditions. Three perforated adjustable shelves are provided. Temperature range from 5°C to 50°C ± 2°C is controlled by a Digital Temperature Controller and Indicator. Heating is achieved by insulated elements and cooling by a sealed compressor unit. Inner cyclic illumination is controlled by a 0-24 hrs. Timer and light intensity by a controller.

                    Humidity created in a stainless steel chamber heated by an immersion heater below the chamber, from ambient to 95% ± 3%RH and is controlled by a humidistat.

                    Chamber sizes available:-

                     

                    Size (W x H x D)Capacity
                    570 x 875 x 550 mms10 cu ft.
                    775 x 900 x 775 mms20 cu ft.
                    825 x 1200 x 825 mms30 cu ft.
                    900 x 1720 x 800 mms45 cu ft.

                      Additional Information:
                      • Item Code: ET-12072

                      Seed Dryer Cabinet

                      Seed Dryer Cabinet- ET-11994
                      Is useful to dry small lots of seed samples. Double walled construction with gasket double wall door. Inner chamber made of anodized aluminium or stainless steel sheet and outer made of mild steel sheet duly finished in powder coating. Two adjustable 90 x 89 x 5 cms. trays are provided. A blower fan has been provided to maintain inner temperature uniformly. Temperature range 5°C above ambient to 60°C ± 2°C controlled by a digital temp. Indicator & controller. The cabinet is mounted on castor wheels.
                      • Chamber size : 48" x 36"

                      Optional :

                      • Digital temp. indicator-cum-controller with computer data logger

                      Additional Information:
                      • Item Code: ET-11994

                      Tray Dryers

                      Tray Dryers
                      Item code: ET-11947

                      has a double walled construction. Gap filled with glass wool for temp. Insulation. Inner and outer walls made out of thick mild steel sheet on stout mild steel angle with motorized air circulation. Dial type thermometer has been provided. Temperature range ambient to 150°C.

                      Technical Specifications:-

                      • Suitable tray size: 32 x 16 x 1¼"

                         

                         

                      Chamber sizes in inchesRatingNo. Of trays
                      33 x 33 x 123.0 kw6
                      33 x 33 x 175.0 kw12
                      33 x 33 x 347.5 kw24
                      68 x 39 x 3612.0 kw48
                      72 x 77 x 3618.0 kw96


                      Optional :

                      • Digital temp. indicator-cum-controller.
                      • Digital temp. indicator-cum-controller with computer data logger

                      Additional Information:
                      • Item Code: ET-11947

                      Freeze Dryer

                      Freeze Dryer (Lyophilizer)
                      Item code: ET-12064

                      covers a range of application from multi user centralised laboratory applications, pilot plant determination work etc. It is a free standing, castor mounted unit with a fully accessible cabinet. It is supplied with a powerful vacuum pump. Standard Laboratory Model with Hermetically sealed reputed make compressor gives temperature upto -40°C.Condenser trap is provided at nonmagnetic stainless steel dished bottom for complete effluent removal.

                       

                      Refrigerant coils made of copper are heavily insulated for maximum efficiency. Temperature is adjustable upto -40°C and is maintained automatically by digital temp. controller. Vacuum drum having 22.8 cm diameter and 25.4 cm height is made up of nonmagnetic stainless steel with plexi glass top cover and incorporates 6 / 8 / 12 quick seal valves/ports for manifold drying having 12.5 mm outer diameter provided for quick drying. Aesthetically designed cabinet in steel gives a pleasant look. Suitable to work on 220V AC 50Hz supply.


                      • Capacity :- 3 liters, 5 liters, 10 liters.
                      • Optional Accessories :- Voltage Stabilizer - 5 KVA.

                      Additional Information:
                      • Item Code: ET-12064

                      Muffle Furnaces

                      Item code: ET-11981

                      We offer Muffle Furnaces with double walled construction of thick PCRC sheet. Outside finished in shoving enamel and gap insulated with ceramic wool. Heating elements of kantha A-1 wire fitted with high quality energy regulator, pyrometer, thermocouple, silver thermal fuse, main lead with power plug to work on 220V AC 50Hzsingle phase.


                      Available in:

                      Muffle Size in mms.Rating
                      100 x 100 x 2251.5 kw
                      125 x 125 x 2502.5 kw
                      125 x 125 x 3003.0 kw
                      150 x 150 x 3003.5 kw
                      200 x 200 x 3005 0 kw

                      Optional:-

                      • Solid state temp. Controller in lieu of energy regulator
                      • Digital temp. indicator-cum-controller.
                      • Digital temp. indicator-cum-controller with computer data logger.
                      • Models with maximum temperatures 900°C, 1000°C,1100°C, 1200°C & 1600°C available.

                      Additional Information:
                      • Item Code: ET-11981

                      Hot Plates

                      Rectangular (with cast -iron plate)
                      Item code: ET-11990

                      Hot Plates
                      have rectangular body made of PCRC sheet finished in enamel paint, rectangular cast iron plate with insulated elements to work on 220V AC 50Hz single phase.


                      Sizes of plates in inches rating:

                      Size of chamber in inchs (WxHxD)

                      Capacity (KW)

                      10 x 12 x 6"

                      1.2 kw

                      10 x 16 x 6"

                      - 1.5 kw

                      12 x 18 x 6"

                      -2.0 kw

                      18 x 24 x 6"

                      3.0 kw

                       


                        Rectangular in shape & has Stainless Steel top.

                        Options for above models :

                        • Pyrometer with thermocouple for temp. Indication
                        • Digital temp. Indicator-cum-controller

                        Additional Information:
                        • Item Code: ET-11990

                        Round Hot Plates

                        Round Hot Plates :
                        Item code: ET-11989

                        The body is made of PCRC sheet duly painted. Heating plate diameter is of 8" of cast iron with heating elements of 1.5 KW rating. Temp. is controlled by energy regulator / thermostat.

                        Types:-

                        • Single plate
                        • Double plate with individual energy regulators

                        Additional Information:
                        • Item Code: ET-11989

                        Heating Mantle

                        Heating Mantles
                        Item code: ET-11988

                        is available with energy regulators. These are provided with hand knitted heating nets of glass yarn which are joint-less to withstand high temperature upto 400°C. Single individual size upto 5 litre capacity containers. Body is made of one piece spun aluminum and is lagged with special mineral wool. Panel is provided with on-off switch, energy control knob, pilot lamp etc. Supplied complete with cord-plug. It works on 220V AC 50Hz single phase.


                        Technical Specifications:
                        -

                        Single SizeWattage Single
                        50 ml60
                        100 ml60
                        250 ml150
                        500 ml200
                        300 ml300
                        2 Lit.450
                        3 Lit450

                        Note : Other sizes, capacities, multiple models and spare Heating mantles can be supplied on demand.

                        Additional Information:
                        • Item Code: ET-11988

                        Distillation Stills Manasty

                        Distillation Stills Manasty Type Wall Hanging :Item code: ET-12003

                        Unit made of all stainless steel sheet for making pyrogen-free distilled water. Kettle element with cut-out system has been employed. Clamps have been provided for wall hanging. Supplied with plug-cord to work on220V AC 50Hz single phase.


                        Capacities available : 2, 4, 5, 6, 8, 16 & 20 litres per hour.


                        Additional Information:
                        • Item Code: ET-12003

                        Distillation Stills Barnstead Type

                        Item code: ET-12005

                        Barnstead Type Distillation Stills
                        have table model, double walled construction with inner and outer chambers made of stainless steel sheet. Gap filled with glass wool for temp. insulation. Supplied with plug-cord to work on 220V AC 50Hz single phase.


                        Capacities available : 10, 15, 20, 25 litres per hour.


                        Additional Information:
                        • Item Code: ET-12005

                        All Glass Distillation Apparatus (Electrically Heated)

                        Distillation apparatus all glass
                        Item code: ET-12004

                        Distillation Apparatus All Glass is the assembly consists of a corning glass flask with embedded heating elements fused in spiral type glass coil internally at bottom. A double wall coiled condenser has standard ground glass joints. Complete with glass fitting, metallic stand, rings clamps and electrical fittings. The unit supplied is as per NPL patent design. To work on 220/230 volts A.C. supply.


                        Flask capacity single stage double stage triple stage

                        a) 3lit.Cap.

                        b) 5ltr.Cap


                        I) Thermal sensor cutoff device : for single unit
                        ii) Thermal sensor cutoff device : for Double unit
                        iii) Thermal sensor cutoff device : for three unit
                        iv) Special grade rubber tubing (Coil of 10 meter)


                        Additional Information:
                        • Item Code: ET-12004

                        Soxhlet Extraction Units

                        Soxhlet And Digestion Units
                        Item code: ET-11573

                        And Soxhlet Extraction Units (without glass parts) : Standard mild steel housing with heating mantles or hot plates for surface temperature upto 300°C. Provided with two horizontal and two vertical rods complete with sockets and screws to hold flasks, individual pilot lamps and energy regulators etc.

                        Models:

                        • 1 : 3 tests mantle type
                        • 2 : 6 tests mantle type
                        • 3 : 3 tests hot plate type
                        • 4 : 6 tests hot plate type

                        Additional Information:
                        • Item Code: ET-11573

                        Kjeldahl Distillation & Digestion Unit

                        Kjeldahl Distillation & Digestion Unit
                        Item code: ET-11571

                        Provided with two sets of mantle type heating platforms-one for Digestion and other for Distillation. Complete with condenser rack, lead fume duct and a pair of hangers, on a mild steel sheet tubular stand. Both units supplied with individual energy regulators. To work on 220 V AC 50 Hz single phase.

                        (i) 3 tests mantle type with 3 energy regulators.

                        (ii) 6 tests mantle type with 6 energy regulators.

                        Note : Glassware for above all at an Extra Cost.


                        Additional Information:
                        • Item Code: ET-11571

                        Kjeldahl Distillation Unit

                        Kjeldahl Distillation Unit (Without glass parts) :
                        Item code: ET-11569

                        is useful for distillation purposes in 300 & 500 ml capacity flasks. Provided with condenser rack. It works on 220V AC 50Hz.

                        • 3-tests mantle type with 3 energy regulators.
                        • 6-tests mantle type with 6 energy regulators.


                        Kjeldahl Distillation Unit :

                        Useful for estimation of Nitrogen contents in substances by digestion in 300 & 500 ml flasks. Provided with Lead fume duct and pair of hangers. It works on 220V AC 50Hz single phase.


                        Provided with two sets of mantle type heating platforms-one for digestion and other for distillation. Complete with condenser rack, lead fume duct and a pair of hangers, on a mild steel sheet tubular stand. Both units supplied with individual energy regulators. It works on 220V AC 50Hz.


                        Note : Glassware for above all at an extra cost.


                        Additional Information:
                        • Item Code: ET-11569

                        Deep Freezer

                        Item code: ET-11942

                        These Quick Freezers are designed for quick freezing and storing of Blood Components. Serum, Vaccines. Biological and Medical Specimens. Clinical Samples etc., at low temperatures. These freezers are with specially engineered Superior Insulation and specially designed refrigeration system. Constructed of double walls, the exterior is made of sheet steel powder coated colour combination while the interior of stainless steel having PUF insulation to minimise heat loss. Capillary controlled balanced hermatically sealed referigeration is most economical, trouble free and exceptionally quiet. Temperature controlled by Digital Electronic Indicator-cum-Controller. Counter balanced door provided for easy access to chamber and inside Acrylic door to avoid temperature loss.

                        Temperature range –20C, –30C, –70C .

                        Available in Horizontal or designs. To work on 220 V AC 50 Hz single phase.

                        Capacity :
                        • 55 ltr / 2 cu ft,
                        • 120 ltr / 4.5 cu ft,
                        • 170 ltr / 6 cu ft
                        • 280 ltr / 10 cu ft
                        • 425 ltr / 15 cu ft
                        • 650 ltr /
                          • 23.5 cu ft

                        Additional Information:
                        • Item Code: ET-11942

                        Ultra Low Deep Freezer

                        Item code: ET-11943
                         
                        • -40°C chest freezers provide versatile and reliable sample storage.
                        • Delivers all the sample protection features of our Forma 900 and Forma 700 upright series and available in four convenient sizes as well as a full range of racking solutions.
                        • Microprocessor control: Centralized information center, including microprocessor control and monitoring system ensures that all controls and displays are easy to reach and read—knee level on the 3 cu. ft. models
                        • State-of-the-art, refrigeration system: Iimproves temperature control and increases reserve BTUH capacity, resulting in a more stable temperature sample
                        • 5 in. (127mm) foamed-in-place, polyurethane insulation: Reduces power consumption, maintains temperature setpoint and combined with triple-point door gasket, provides longer holding time in the event of a door opening
                        • Rugged, heavy gauge, cold-rolled steel cabinets: with a powder coat paint finish provides a uniform exterior that resists chipping and rust
                        • 1 in. (25mm) access ports: allow for the use of inexpedient probes or instrumentation
                        • Stainless steel interior
                        • Polystyrene interior sub-lids: Reduce cold air loss and improve temperature recovery after door openings
                        • Easy-to-remove, washable filter: Provides protection from dust on the condenser, causing reduced refrigeration performance and increased risk to samples
                        • Simplified installation: with our new easy-roll 2 inch locking casters

                         

                        Features:

                        • Temperature range: -20C, -30°C, -40°C, -70°C, -80°C .
                        • Available in horizontal or vertical designs.
                        • It works on 220V AC 50Hz single phase.


                        Capacity :

                        • 55 ltr / 2 cu ft.
                        • 120 ltr / 4.5 cu ft.
                        • 170 ltr / 6 cu ft.
                        • 280 ltr / 10 cu ft.
                        • 425 ltr / 15 cu ft.
                        • 650 ltr / 23.5 cu ft.

                        Optional :

                        • Digital temp. indicator-cum-controller with computer data logger.

                        Additional Information:
                        • Item Code: ET-11943

                        Vaccine Deep Freezer

                        Vaccine Deep Freezer
                        Item code: ET-11945

                        Specially designed for quick freezing and storing of biological medical specimens, clinical samples, blood components, serum, vaccines etc, at low temperature.

                        Features:

                        • Temperature range: -20ºC, -30°C, -40°C, -70°C, -80°C .
                        • Available in horizontal or vertical designs.
                        • It works on 220V AC 50Hz single phase.


                        Capacity :

                        • 55 ltr / 2 cu ft.
                        • 120 ltr / 4.5 cu ft.
                        • 170 ltr / 6 cu ft.
                        • 280 ltr / 10 cu ft.
                        • 425 ltr / 15 cu ft.
                        • 650 ltr / 23.5 cu ft.


                        Optional :
                        • Digital temp. indicator-cum-controller with computer data logger.

                        Additional Information:
                        • Item Code: ET-11945

                        C.O.D Digester

                        Item code: ET-11905
                        • COD Digester is the most accepted Thermoreactor for Determination of Chemical Oxygen Demand in Various Substances.
                        • Chemical Oxygen Demand (COD) is a Measure of the Capacity of Water to Consume Oxygen During the Decomposition of Organic Matter and the Oxidation of Inorganic Chemicals such as Ammonia and Nitrite.
                        •  COD Measurements are Commonly made on Samples of Waste Waters or of Natural Waters Contaminated by Domestic or Industrial Wastes.
                        • Chemical Oxygen Demand is Measured as a Standardized Laboratory assay in which a closed Water Sample is Incubated with a Strong Chemical Oxidant Under Specific Conditions of Temperature and for a Particular Period of Time.
                        • High Performance and User Friendly Controls Combine to Produce a Specification Which Offers Exceptional Efficiency and Reliability. The Benefit to you-convenient, No Fuss Heating!
                        • Excellent Temperature Control.
                        • Uniform And Stable Heating
                        • New Compact Size

                        • Technical Specification:

                          Controller

                          Microprocessor Based Digital Temperature Indicator cum Controller

                          display

                          LED with set value (SV) and Process value (PV)

                          BLOCK DIMENSIONS (WXDXH) (in mm)

                          270mm(L) X 150mm(W) X 70mm(D)

                          Heater Load

                          1.0 KW

                          Tube Cavity

                          40mm(Ø) x 65mm(D)

                          No. of Cavaties

                          15 holes to accommodate 15 samples

                          Glass Tube Size

                          Supplied with 15 nos. of Glass Tubes of size 38mm(Ø) x 200mm (Length)

                          Glass Air Condenser Size

                          Supplied with 15 nos. of air condensers of 600 mm length each.

                          Sample Size

                          20 ml

                          Temperature Range

                          Ambient +5°C to 150°C

                          Temperature Accuracy

                          ±1°C

                          Sensor

                          RTD (Pt-100)

                          Material External

                          Powder Coated CRC Steel

                          Block

                          Polished Aluminium

                          Tube Rack

                          1 No.

                          Timer (SAD) (Auto Time Control Unit)

                          Fitted with AUTOMATIC DIGITAL MINUTE TIMER which starts automatically when set/desired value of temperature is achieved. When the set time period is over the heaters get switched off automatically.

                          Buzzer

                          Alarm for cycle end

                          Power Supply

                           

                          230V AC, 50/60Hz


                        Additional Information:
                        • Item Code: ET-11905

                        V.D.R.L Rotators and Shaker

                        V.D.R.L. Rotator & Shaker
                        Item code: ET-11930

                        used for Venereal Disease Research Laboratory and other agglutination tests, blood grouping tests and for mixing of solutions in small flasks, beakers or bottles. Large platform 300x300 mm can take cavity slides, blood bottles, flasks by use of spring holders.

                        It runs at fixed speed of 180 RPM. 60 minutes automatic timer has been provided to control shaking duration. Complete with cord-plug to work on 220V AC 50Hz single phase.


                          Additional Information:
                          • Item Code: ET-11930

                          Shaking Machine Wrist Action

                          Item code: ET-12030

                          Shaking Machine Wrist Action
                          has a heavy cast iron base with sturdy construction with two side arms for holding flasks. A fractional H.P. Heavy duty motor with variable speed through continuously variable speed controller is provided. To hold flasks of capacity 100 to 1000 ml. Complete with cord plug etc. To work on220V AC 50Hz single phase. Automatic 0-60 minutes timer.


                          Available in :
                          • Model to hold 6 flasks
                          • Model to hold 8 flasks
                          • Model to hold 16 flasks


                          Shaking Machine Wrist Action & Platform Shaker : It is provided with a platform at the top of the body to hold the flask through clamps for 9/16 flasks more.


                            Additional Information:
                            • Item Code: ET-12030

                            Shaking Machines Rotary

                            Shaking Machine Rotary (horizontal) :
                            Item code: ET-12028
                            Continuous shaking of flasks from 100 to 500 ml capacity. Bench type table top model with platform with rubber discs/steel clamps mounted on ball-bearing crank-shafts to give an orbital motion to flasks within a diameter of2". Motor is coupled with v-belt with a pitch pulley and mounted on heavy angle iron frame. Machine supplied with fixed or variable speed controlled by mechanical speed controller. To work on 220VAC 50Hz single phase.

                            Specifications:

                            Platform sizesHolding CapacityH.P. Motor
                            45 x 45 cms25 flasks of 100 ml0.25
                            45 x 45 cms36 flasks of 50 ml0.25
                            45 x 45 cms16 flasks of 250 ml0.25
                            55 x 55 cms25 flasks of 250 ml0.25
                            65 x 65 cms36 flasks of 250 ml0.5
                            100 x 100 cms81 flasks of 250 ml1
                            100 x 100 cms81 flasks of 500 ml1


                            Note
                            : Other sizes and capacities can be fabricated on demand.


                            Additional Information:
                            • Item Code: ET-12028

                            Shaking Machine Table Model

                            Shaking Machine ET-12033 (Table Model) :

                            To hold the sieves eight in number. Totally adjustable to give the spring action shaking with Automatic 0-60 minutes Timer.


                            Additional Information:
                            • Item Code: ET-12033

                            Shaking Machine Sieves

                            Item code: ET-12031

                            Shaking Machine Sieves (Rotor type)
                            used for dry sieve tests to carry 7 sieves of 6" or 8" diameter sieves. Driven by 0.25 HP motor through reduction gears. The Gear mechanism runs in a oil-bath. Tapping motion is achieved by hammer from top. To work on220V AC 50Hz single phase. Supplied with adopters for 8" sieves but without sieves with Automatic 0-60 minutes timer.

                            Additional Information:
                            • Item Code: ET-12031

                            Shaking Machine

                            Shaking Machine (Kahn Rack Type) :
                            Item code: ET-12029

                            Designed for shaking kahn racks, bottles or flasks of different sizes by adjusting compartments. Fitted with heavy duty motor. The rate of motion adjustable mechanically by belt tension. Oscillations 280 per minute approximately. It works on 220V AC 50Hz single phase with automatic 0-60 minutes Timer.


                            Specifications:

                            Platform sizesBodySpeedMotor
                            20 x 13 x 4"OpenFixed0.25 HP
                            20 x 13 x 4"ClosedFixed0.25 HP
                            20 x 13 x 4"ClosedVariable0.25 HP
                            31 x 17 x 4"ClosedVariable0.25 HP
                            36 x 18 x 4"ClosedVariable0.25 HP




                            Shaking Machine (Table Model) :

                            JEQ-5(d): To hold the sieves eight in number. Totally adjustable to give the spring action shaking with Automatic 0-60 minutes Timer.


                            Additional Information:
                            • Item Code: ET-12029

                            Clinical Centrifuge Machines

                            Item code: ET-11931

                            Clinical / Medico Centrifuge Machines is
                            dome type, sturdy, stable, heavy body with silently mounted motor for vibration-free performance with built-in 5-speed regulator and one non-removable swing out rotor. Complete with tube carriers. Maximum speed 3500 RPM. Neatly finished in stoving enamel paint.

                            Medical/Clinical(i)(ii)(iii)
                            Capacity (ml.)4 x 156 x 158 x 15
                            Max. RCF'g'185016001600
                            Max. RCF'g"125012501250

                            Additional Information:
                            • Item Code: ET-11931

                            Compact Laboratory Centrifuge

                            Item code: ET-11932

                            Compact Laboratory Centrifuge
                            has a compact rectangular body made of mild steel duly powder coated, with clear acrylic lockable lid, continuously variable speed regulator, safety fuse, pilot lamp etc. provided on streamlined panel. With plug-cord to work on 220VAC 50Hz single phase. Maximum speed 4000 RPM. A special safety mode is provided that when lid is open instrument will stop working.


                            Capacity (ml.):

                            • 4 x 50
                            • 6 x 50
                            • 8 x 15
                            • 12 x 15
                            • 16 x 15

                             

                            Optional :

                            • Automatic 0-60 minutes Timer
                            • Speedometer Digital
                            • Maximum speed 10000 can also be provided

                            Additional Information:
                            • Item Code: ET-11932

                            Refrigerated Centrifuge

                            Refrigerated Centrifuge
                            Item code: ET-11934

                            has a streamlined rectangular body with elegant panel and clear acrylic lockable lid. Complete with pilot lamp, continuously variable speed regulator, Digital speed-indicator, plug-cord to work on 220V AC 50Hz single phase. A hermetically sealed compressor for cooling from ambient to -20°C. Temperature controlled by Digital Temp. Controller cum Indicator with accuracy ± 0.50°C. Maximum speed 5000 RPM. The centrifuge has an electrical interlock to ensure that the unit can not run with cover open.

                            Available Capacity:

                            • 8 x 15 ml
                            • 12 x 15 ml
                            • 16 x 15 ml
                            • 12 x 1.5 ml
                            • 16 x 1.5 ml
                            • 8 x 50 ml

                            Optional :
                            Automatic Voltage Stabilizer 2 KVA.

                            Note :
                            Use of suitable Voltage stabilizer is a must.

                            Additional Information:
                            • Item Code: ET-11934

                            Vacuum Centrifuge

                            Vacuum Centrifuge :
                            Item code: ET-11933

                            Heavy duty motor to work continuous & long time comprising heavy rotor head. Speed controlled by continuous variable speed controller.

                            • Vacuum pump capacity 25 litre per hour with 0.25 H.P. Motor
                            • Equipment to discharge controllable fumes mixed with running water
                            • Provided with Ammeter, Voltmeter, Rpm meter, Vacuum Pressure Controller, Vacuum Gauge

                            Additional Information:
                            • Item Code: ET-11933

                            Rotary Vacuum Pumps

                            Item code: ET-12018

                            Rotary
                            Vacuum Pumps is mounted on heavy steel base, oil sealed, heavy duty electric motor, v-belt driven at speed up to 400RPM, components high grade cast iron are the main features. Supplied in single or double stage models creating maximum vacuum of 0.01 mm of Hg column or 0.001 mm of Hg. Column respectively. It works on 220V AC 50Hz single phase. Provided with belt guard, non return valve and vacuum gauge.

                            Specifications:

                            CapacityMotor
                            25 lit./mt.0.25 hp
                            45 lit./mt.0.25 hp
                            75 lit./mt.0.25 hp
                            100 lit./mt.0.50 hp
                            150 lit./mt.0.50 hp
                            200 lit./mt.1.00 hp

                            Optional:-
                            • Air blast
                            • Moisture trap
                            • High vacuum oil

                            Note :
                            Ask for oil free vacuum pumps.

                            Additional Information:
                            • Item Code: ET-12018

                            Magnetic Stirrer

                            Magnetic Stirrers :
                            Item code: ET-11992

                            Compact stirring device utilizing a rotating magnetic field by a permanent magnet including variable stirring action. Magnetic field applied from below the container. Stirring is accomplished by a Teflon rotor placed in the liquid to be stirred. Complete with pilot lamp, plug-cord, speed regulator continuously variable, heat control knob, on-off switch.

                            It works on 220V AC 50Hz single phase. Models with or without Hot Plate are available :

                            (a)
                            :-
                            • Magnetic stirrer with Hot Plate
                            • Capacity : 1, 2, 5, 10 litre

                            (b):-
                            • Magnetic stirrer without Hot Plate
                            • Capacity : 1, 2, 5, 10 litre

                              Additional Information:
                              • Item Code: ET-11992

                              Digital Magnetic Stirrer With Hot Plate

                              DIGITAL MAGNETIC STIRRER WITH HOT PLATE:
                              Item code: ET-11991

                              Compact stirring device utilising a rotating magnetic field by a permanent magnet including variable stirring action from the speed from 100- 1400 rpm with speed accuracy of ±2. Magnetic field applied from below the container. Stirring is accomplished by a Teflon rotor placed in the liquid to be stirred. Stainless steel top plate bearing medium temp max. 250º C with an accuracy temp setting of ±5ºC control Digital temperature controller with an accuracy setting of ±5ºC with the facility of Safety circuit hot plate 25ºC over .Complete with stands and clips, magnetic stirrer,pilot lamp, plug-cord, speed regulator continuously variable, digital temperature controller , on-off switch. To work on 220 VAC 50 Hz single phase.

                                Additional Information:
                                • Item Code: ET-11991

                                Tissue Homogeniser

                                Item code: ET-12045

                                Tissue Homogenizers
                                is an electrical stainless steel rod with teflon paste and replaceable grinding vessel of borosil glass. Fitted with 1 / 20 H.P. motor with 4000 RPM with a speed regulator stirring rod8 mm x 325 mm long fitted with drill chuck. Unit fitted on heavy cast-iron base. It can be raised and lowered in height. Complete with plug-cord etc. It works on 220V AC 50Hz single phase.


                                Capacities Available :

                                • 10ml
                                • 15ml
                                • 30ml
                                • 50ml
                                • 100ml

                                Additional Information:
                                • Item Code: ET-12045

                                Lab Stirrer

                                Item code: ET-12044

                                Stirrer
                                is designed to meet requirements of laboratories demanding wide flexibility of stirring operations. Shaft upto 6.5mm diameter and 350 mm long with teflon rotor is provided. Fitted with 1 / 20 HP AC / DC universal motor, speed upto 4000RPM rotary speed regulated
                                capacity 5-7 liters (depending on viscosity). The total unit can be raised and lowered in height.

                                Additional Information:
                                • Item Code: ET-12044
                                • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

                                Vortex Mixer

                                Item code: ET-12027

                                Vortex mixer
                                :

                                Adjustable speed, Vortex genie short, rapid, eccentric stroke motor ribin neoprene cup imparts vigorous agitation to tubes. With speed control indicator and on-off switch.

                                Additional Information:
                                • Item Code: ET-12027

                                Melting Point Apparatus

                                Item code: ET-12040
                                Melting Point Apparatus
                                is used for determination of the melting point upto 300°C with temperature controller. Block made of aluminium bored with the diameter to accept capillary for keeping specimen.

                                Additional Information:
                                • Item Code: ET-12040

                                Precision And Digital Melting Point Apparatus

                                Item code: ET-12025
                                Digital Melting Point Apparatus is a compact instrument designed for accurate determinations of melting points of solid samples.

                                Salient Features

                                • Cylindrical silicon oil bath
                                • Built-in magnetic stirrer with electronic speed controller.
                                • Electronic controller for adjusting the heating rate.
                                • Digital display of temperature with PT-100 sensor.
                                • Glare-free back-ground light with adjustable light intensity.
                                • Provision for holding the melting point display

                                 

                                Description

                                Temperature Range

                                20 above RT-2750C

                                Readability

                                10

                                Display

                                3 Digit LED

                                Heating Rate Control

                                Electronic

                                Stirrer Speed Control

                                Electronic

                                Temperature Sensor

                                PT-100


                                Additional Information:
                                • Item Code: ET-12025

                                Digital Automatic Melting Point Apparatus

                                Digital Automatic Melting Point Apparatus
                                Item code: ET-12041
                                is designed for quick and accurate detection of melting point. Feature packed & easy to use, this is an indispensable bench top tool. This equipment has an arrangement to hold the capillary containing the sample in uniformly heating media. the temperature is indicated on a digital display readable in 1.0ºC. At the point, whn the sample melts, the heating is automatically cut-off and the digital display showing the temperature remains on the indicator till it is cleared. No Silicon oil or other bath is required as heating media. Range 2.0ºC above room temperature to 350ºC.


                                Specifications

                                • Display Digital 3 ½ Digit, Bright LED
                                • Accuracy 1%
                                • Operation Fully Automatic
                                • Dimensions L 405 x B 360 x H 235 mm (approx)
                                • Power 230V 10, 50Hz

                                Additional Information:
                                • Item Code: ET-12041

                                Thin Layer Chromatography Apparatus

                                Thin Layer Chromatography Apparatus:
                                Item code: ET-12024

                                This unit is based on Desaga German pattern having movable applicator with in built thickness arrangement between 0 to 2 mm have the following components :-
                                • Spreader (Applicator) made of Aluminum / electroplated brass
                                • Perspex Base size 143 x 26 cm to support 5 glass plates of size
                                • 20 x 20 cm and 2 plates of 20x5 cm
                                • Plate Rack Aluminum for ten 20 x 20 cm plates
                                • Spotting Tern plate perspex
                                • Developing tank with lid
                                • T.L.C. plates set 20 x 20 cm or 20 x 10 cm
                                • Micro-pipette
                                • Scriber for making lines
                                • Glass sprayer with rubber bellow

                                Additional Information:
                                • Item Code: ET-12024

                                Deionizers

                                Laboratory Deionizer (Ion Exchanger) :
                                Item code: ET-11984

                                The plant consists of One cation Exchanger column containing cation exchanger resin. One anion exchanger column containing anion exchanger Resin. Plant is mounted on M.S. stand with assembly of valves and tubing. One conductivity meter with cell to monitor the ionized solids of purified water and thus control the functions of de-mineralization. The meter is direct reading having reading heavy range 0.40microns/cm.

                                • Capacity or flow rate 30 to 50 Iit/hr.

                                • Capacity or flow rate 75 to 100 Iit/hr.


                                Additional Information:
                                • Item Code: ET-11984

                                Infra Red Moisture Balances

                                Item code: ET-12020

                                A basic method for determination of moisture content, measure percent by weighing and drying simultaneously. Infra Red radiation are reflected by a bulb and its temperature is controlled by a regulator.
                                The balance scale is divided in terms of moisture content on wet weight basic. Work on 220V 50Hz AC mains.
                                Specifications:-

                                • Range : 0-100%
                                • Accuracy : 0.2%
                                • Weight : 20 Kg.
                                • Sample weight : 5gm, 20gm, 25gm

                                  Additional Information:
                                  • Item Code: ET-12020

                                  Laboratory Ovens

                                  Laboratory Ovens
                                  Item code: ET-11975

                                  Incubator are designed fabricated & tested to suit various applications in growing field of medical agricultural, research laboratories of hospitals. Suitable to work on 220/230v ac supply.

                                  Construction: Double walled construction with inside aluminum/stainless steel chamber having 60-70mm glass wool insulation. Door is fitted with heavy chrome plated hinges & spring & roller type latch catch. Provided with adjustable steel/ aluminum/ wiremesh tray for better air circulation. Temp. Is recorded by means of "l" shape thermometer fitted at the front of the cabinet.

                                  Temperature range: Ambient to 70ºc ± 1º c . Temperature controlled by hydraulic type capillary thermostat.

                                  Heating: Heating elements are made from high grade (kanthal isi) resistance wire. Heaters are fitted/wound along all sides & bottom. Complete with 2 pilot lamp cord & plug pin etc.


                                  Available size ltrs
                                  12" x 12" x 12" (300x300x300mm) 28
                                  14" x 14" x 14" (350x350x350mm) 43
                                  18" x 18" x 18" (450x450x450mm) 90
                                  18" x 18" x 24" (450x450x605mm) 105
                                  24" x 24" x 24" (605x605x605mm) 120
                                  24" x 24" x 36" (605x605x900mm) 215
                                  24" x 18" x 36" (605x450x900mm) 240


                                  Additional Information:
                                  • Item Code: ET-11975

                                  Sampling Dispensing Booths

                                  Item code: ET-11957

                                  Features:
                                  • Wooden/m. S powder coated / stainless steel body (304)
                                  • HEPA filter (0. 3 micron)
                                  • Fine filter (10-5 micron)
                                  • Pre-filter (10 micron)
                                  • Motor blower assembly
                                  • U. V. Light
                                  • Fluorescent lamp
                                  • Operating switch
                                  • Static pressure manometer
                                  • Stainless steel standing base
                                  • High quality hepa filter provides protection for the product (filtration efficiency of more than 99. 97% at 0. 3 micron
                                  • Ultra-quiet noise level of not more than 65 dba
                                  • Durable and easy to clean stainless steel body
                                  • Work area properly illuminated by diffused glare free fluorescent light
                                  • PVC flexible curtains on all the three sides

                                   

                                  Optional accessories:

                                  • Particle dust count-validation at site
                                  • Timer for U. V. Light
                                  • Speed regulator
                                  • Caster wheels
                                  • Magnahelic manometer

                                  Additional Information:
                                  • Item Code: ET-11957

                                  Heating Orbital Shakers

                                  Heating Orbital Shakers
                                  Item code: ET-11978

                                  Incubator are designed fabricated & tested to suit various applications in growing field of medical agricultural, research laboratories of hospitals. Suitable to work on 220/230v ac supply.

                                  Construction: double walled construction with inside aluminium/stainless steel chamber having 60-70mm glass wool insulation. Door is fitted with heavy chrome plated hinges & spring & roller type latch catch. Provided with adjustable steel/ aluminium/ wiremesh tray for better air circulation. Temp. Is recorded by means of "l" shape thermometer fitted at the front of the cabinet.

                                  Temperature range: Ambient to 70ºc ± 1º c. Temperature controlled by hydraulic type capillary thermostat.

                                  Heating: Heating elements are made from high grade (kanthal isi) resistance wire. Heaters are fitted/wound along all sides & bottom. Complete with 2 pilot lamp cord & plug pin etc.


                                  Available size ltrs:
                                  • 12" x 12" x 12" (300x300x300mm) 28
                                  • 14" x 14" x 14" (350x350x350mm) 43
                                  • 18" x 18" x 18" (450x450x450mm) 90
                                  • 18" x 18" x 24" (450x450x605mm) 105
                                  • 24" x 24" x 24" (605x605x605mm) 120
                                  • 24" x 24" x 36" (605x605x900mm) 215
                                  • 24" x 18" x 36" (605x450x900mm) 240

                                  Additional Information:
                                  • Item Code: ET-11978

                                  Sampling / Dispensing Booths

                                  Sampling / Dispensing Booths
                                  Item code: ET-11958

                                  These are overhead clean air modules mounted with Stainless steel frame on the ground. Units can be built with/ without casters so the clean enclosure can be moved over equipment or used to isolate a controlled process. It is basically used for filling, refilling weighing and sampling/ Dispensing of Raw Material, Basic Compounds, Active Compounds. It works on the principal of Laminar Air Flow with HEPA Filters & Pre-Filters.

                                  This will act as a 100 Room. Protection of the personnel in the cabinet from the processed substances by vertical flow with Reverse Flow of clean air protection of the raw and intermediate products to be processed. Protection of the room where the cabinet is built up and environment from highly active substance which otherwise would disperese in the room and escape in the atmosphere unfiltered. Safe collection and deposition of substance released during work.

                                  Additional Information:
                                  • Item Code: ET-11958

                                  A C Modules

                                  Item code: ET-11965

                                  It is useful in front of air conditioner to provide a sterile, bacteria free & dust free air of 0.3 microns in a particular temperature. It works on the laminar air flow principle.

                                  Specifications:- Sizes available asper the size of A. C. (window/split type)

                                  Additional Information:
                                  • Item Code: ET-11965

                                  Pressure Modules

                                  Item code: ET-11966

                                  Positive pressure modules are designed to provide a clean area within a small enclosure or cell. These pressure module adopts the same Laminar Air Flow Principle. It generate positive pressure where the Room is totally Closed. It provides a source of Fresh Air in the Room.

                                  Features:
                                  • Wooden/M.S Duley Power Coated/ Stainless Steel Body
                                  • HEPA Filter
                                  • Pre-Filter
                                  • Blower (Motor Blower Assembly)
                                  • Pressure Gauge (Manometer)
                                  • High quality HEPA filter provides protection for the product (filtration efficiency of more than 99.97% at 0.3 micron
                                  • Ultra-quiet noise level of not more than 65 dBA
                                  • Durable and easy to clean stainless steel work
                                  • Work area properly illuminated by diffused glare free fluorescent light

                                   

                                  Optional Accessories:

                                  • Particle Dust Count-Validation at site Timer for U.V. Lights
                                  • Speed Regulator
                                  • Caster Wheels
                                  • Magnahelic Manometer

                                   

                                   

                                  Specifications
                                  Standard Size (Working Area)2' x 2', 3' x 2', 4' x 2', 6' x 2', 8' x 2'
                                  Air Velocity90 ± 20 cfm (Average)
                                  Filtration ElementsMain Filters: HEPA Filter
                                  Prefilter: Washable non-woven polyester fibers.
                                  Filter EfficiencyMain Filters: 99.97 at 0.3 micron
                                  Prefilter: Arrestance 90%, at 10 microns
                                  WorkStainless Steel
                                  Noise Level< 65 dBA
                                  Light Intensity800-1000 Lux
                                  Power Supply220V Single Phase, 50 Hz.

                                  Additional Information:
                                  • Item Code: ET-11966

                                  Deluxe Model (Triple Walled With Jacket)

                                  Item code: ET-11970

                                  For dry sterilization steam stock in the outer side of chamber which are called steam jacket, steam inlet is given to in to the chamber y a valve. After sterilization steam of the chamber release by valve & steam stock in the out side of chamber. If we want to release the jacket there valve will be provided for release also.

                                  Additional Information:
                                  • Item Code: ET-11970

                                  Fully Automatic Table Top Autoclaves

                                  Item code: ET-11974

                                  Overall size
                                  :

                                  • Length : 480 mm width : 470 mm height : 380 mm
                                  • Cacity : 12 litre
                                  • Power consumptrion : 1 kw
                                  • Gross weight : 24 kg

                                   

                                  Features:

                                  • Table autoclave is fully automatic front loading autoclave with dry cycle
                                  • Electronic circuit inside the autoclave with programmable integrated circuit chip
                                  • With dry cycle after sterilization without opening the door
                                  • With digital display of all the operations in sequence and timer & temperature
                                  • The front control panel has a touch type key switches and also have leds to indicated the operation going inside autoclave
                                  • The autoclave is programmed to perform all necessary operations required in sterilization
                                  • With additional solenoids valve provided to shunt out the air from the chamber at the initial stage
                                  • The internal chamber have two number of trays made of stainless steel having size 12" * 8"
                                  • Sealing ring made of silicon rubber
                                  • One sterilization cycle
                                  • Sterilization with dry cycle completes with single touching of start button


                                  Application:
                                  Laboratories, dental clinic & college.

                                  Additional Information:
                                  • Item Code: ET-11974

                                  Rectangular Horizontal Model

                                  Item code: ET-11972

                                  Inner chamber lid & boiler is made of stainless steel. Sterilization cycle is controlled by three way valve or multi port valve made of stainless steel fitted with automatic pressure control switch, safety valve, vacuum valve, water level indicator also fitted in sterilizer. The body is mounted on the tubular stand.

                                  Working Chamber (w x h x d):

                                  • 600x600x1200mm.
                                  • 600x900x1500mm.

                                  Optional Accessories:

                                  • Water cut off device.
                                  • Vacuum breaker valve.
                                  • Musical bell timer.

                                  Additional Information:
                                  • Item Code: ET-11972

                                  Humidifier Aerosol Disinfector

                                  Item code: ET-11985

                                  Humidifier is specially designed to control humidity in areas where it is very essential. Its performance has been very well appreciated in pharmaceutical manufacturing units, storage rooms, processing units of avoid packing problems of snacks foods, printing industry, libraries, paper rooms, photographic industry, wood seasoning etc.

                                  Additional Information:
                                  • Item Code: ET-11985

                                  Ice Flaking Machines

                                  Item code: ET-11911

                                  An automatic Ice machine for your hygienic Ice flakes requirement in research laboratories, chemicals, pharmaceuticals, medical, biotechnological and hotel industries. The machine utilizes running tap water and converts it in the form of ice flakes continuously. It is a compact, self contained unit, covering less floor area & easily installable.


                                  Constructions:- Ice flaker is housed in styled M.S painted body with stainless steel made bin with no chances of corrosion. Ice crusher used is GERMAN CRUSHER made of S.S. to give life long performance.

                                  Water is introduced into crusher assembly through a precision float valve. The inflow of water is smoothly controlled by this float valve for maintaining a required level of water irrespective of variation in pressure at the water input line with automatic cut off in case of Low water/ No water supply.

                                  Ice flakes are collected into a well-insulated/(PUF) stainless steel container. So it stays for longer time. The removal of flakes is easily possible through the stainless steel Top door which can be pushed while removing the ice. Moreover the equipment fitted with an ICE LEVEL CONTROLLER which will put off the system in case ice gets accumulated in the container more than the required level. Hence there is no need of an operator being on the machine all the time. The ice controller is provided with a drain line for occasional cleaning of the container.

                                   

                                  Capacity:

                                  • 40 - 45 KG PER DAY
                                  • 65 - 70 KG PER DAY
                                  • 90 - 100 KG PER DAY
                                  • 100 - 150 KG PER DAY
                                  • 250 - 300 KG PER DAY
                                  • OR Any Other Capacity As Per Requirement

                                  Additional Information:
                                  • Item Code: ET-11911

                                  Shaking Tray Size Inside

                                  Item code: ET-11999

                                  Tray made of S. S. 304 quality:

                                  • 275x275x75 mm. 6 ltrs.
                                  • 275x275x150mm. 12 ltrs.
                                  • 405x300x150mm 18 ltrs.

                                  Additional Information:
                                  • Item Code: ET-11999

                                  Distillation Appratus

                                  Item code: ET-12003A

                                  Features:
                                  For pyrogen free distilled water. All stainless steel body. Design feature ensures economy in operation. Constant level arrangement for inlet water. Available upto 20 ltrs/hr. Capacity.

                                  Construction: All parts of water still are made out of stainless steel. It comprises of main chamber, condenser tube, condenser jacket, vapour baffle and constant level arrangement.

                                  Splashing of water delivery tube is avoided by superior design of vapour baffle. The lid rests in ensures minimum (negligible) loss of steam. The condenser tube can be dismantled easily by removing the wing nuts which hold the condenser and jacket together.

                                  Heaters are of immersion type and are capable of displacing the connectors, if the still runs dry. However to ensure long service special care should be taken to avoid the still running dry as the protective arrangement cannot be expected to last normally beyond three operations.

                                  The still is provided with bracket (to be fixed on wall) on which the still can rest. Output liter/hour rating K. W.:
                                  • 2 1. 5
                                  • 4 3. 0
                                  • 6 4. 0
                                  • 10 6. 0

                                  Additional Information:
                                  • Item Code: ET-12003A

                                  Orbital Shaker (Heating Only)

                                  Item code: ET-11978A

                                  Features:

                                  • With variable speed and Digital Temperature Controller
                                  • Inner Outer Stainless Steel with Acrylic Hood for 16 flasks
                                  • Temperature range ambient to 70° C
                                  • Specially designed to hold 12 flask of 250 ml

                                  Additional Information:
                                  • Item Code: ET-11978A

                                  Digital Total Dissolve Solid (TDS) Meter

                                  Item code: ET-12007

                                  Digital TDS Meter are reliable and accurate test instruments for measurement of TDS of aqueous solutions. They measure Conductivity in five ranges. The resolution is 0.1 ppm respectively, in the lowest range. The cell constant is flashed on a digital display & can be adjusted from the front panel. The instruments have the "Check" facility to calibrate the instruments.

                                  The Instrument are ideal for monitoring salt contents in water and soluble salts in soils. They are extremely useful instruments for agriculatural and soil analysis labs, swimming pools, fertilizer plants, petroleum, refineries, textiles plants etc.

                                  Specifictions:
                                  • Display 3½ Digit LED
                                  • Measurement TDS
                                  • Ranges 0 to 200 ppm
                                  • 0 to 2.000 ppt
                                  • 0 to 20.00 ppt
                                  • 0 to 200.00 ppt
                                  • 0 to 1000 ppt
                                  • Accuracy ± 2% FS ± 1 Digit

                                  Temp. Compensation Manual:

                                  • 0 to 50ºC
                                  • Cell Constant Adjustable on Digital Display
                                  • Measuring Cell Platinum DIP Type
                                  • Resolution 0.1 ppm
                                  • Power 230V ± 10% AC, 50 Hz
                                  • Dimensions 76 x 275 x 175mm
                                  • Sensor T.D.S. Cell

                                  Additional Information:
                                  • Item Code: ET-12007

                                  Fake Currency Note Detectors

                                  FakeCurrency Note Detectors
                                  Item code: ET-12015

                                  Uv-Currency Detector U.V. Currency Detector is a boon for businessman, Bankers, Traders, Travel Agents, Post Offices, Railway and all other Institutions where a log of currency transactions take place.

                                  This units has one U.V. Florescent tube which helps in detecting all colour & chemical faults in counterfeit currency, cheques/ demand drafts / visas, Passports, I.D. Cards, Credit Cards, Traveller's Cheques etc. in an efficient and effective way. It also consists of one white tube giving day light effect in which all water marks and other discrepancies in the currency/ cheque/ drafts are easily detected. A magnified glass is provided for extra clearity enabling us to see all the defects clearly in the currency/cheques/drat. These defects are not visible to the naked eye.

                                  U.V. Currency detector is an ultimate device in checking counterfeit currency, duplicate cheques and fake drafts. It is a compact well designed appliance which can easily be accommodated on an office table or can be kept hidden inside a bank counter. This instruments has a magnifying glass for proper magnification.

                                  Additional Information:
                                  • Item Code: ET-12015

                                  Circulated Water Bath

                                  Item code: ET-12001 

                                  This water bath is used to circulate hot water in a particular area/ instrument like b. R. Apparatus or abbe refractometer.
                                  Temperature is controlled by thermostatically/ digital temperature controller, inner chamber ss-304, outer ms duly powder quoted.

                                  Additional Information:
                                  • Item Code: ET-12001

                                  ABBE Refractometer

                                  Abbe Refractometer
                                  Item code: ET-11694

                                  that is designed for quick and convenient measurement of refractive index and dispersion of liquids and solids. The Abbé Refractometer manufactured by us is praised for...


                                  • Additional sugars scale provided
                                  • Precise measurement of percentage
                                  • Prefect measurement refractive index in the range of 1.3 to 1.7 with an accuracy of 0.01

                                  Additional Information:
                                  • Item Code: ET-11694

                                  ABBE Refractometer With Imported Optics

                                  Item code: ET-11689

                                  ABBE refractometer "with imported optics" is also available for more accuracy of results.

                                  Additional Information:
                                  • Item Code: ET-11689

                                  Butyro Refractometer

                                  Item code: ET-11688

                                  This instrument can be used for measuring on oils, fats and waxes giving a reading directly in terms of the oil scale, otherwise known as BUTYRO Scale. The micrometer eye piece allows an accuracy on their scale of 0.1. the soil scale may also be conversion tables. This allows as measuring on materials with index of refraction in the range 1.42 to 1.49 to an accuracy of 0.0002.


                                  Dual scale:

                                  • Sugar Percentage Scale & Butyro Scale
                                  • Subdivided at 1% interval
                                  • Easy Temperature Control
                                  • No Coloration of the filed view
                                  • Micrometer allows accuracy of 0.01% on the oil (Butyro) scale

                                  Additional Information:
                                  • Item Code: ET-11688

                                  Hand Refractometer With Imported Optics

                                  Item code: ET-11693

                                  The instrument is robust in design all metal in construction with a satin chrome finish and supplied in a strong carrying case suitable for the pocket.


                                  Typical applications include Concentration measurement of:

                                  • Fruit Juices
                                  • Battery Acids
                                  • Sugar Solutions
                                  • Plating Solutions
                                  • Protein and Serums
                                  • Soluble Oil Emulsions
                                  • Wines and Soft Drinks
                                  • Confectionery Products
                                  • Starches, Glues & Gums
                                  • Urine Specific Gravity


                                  Ranges: 0 - 32%, 28 - 62%, 58 - 92%, 0 - 55%, 45 - 82%


                                  Additional Information:
                                  • Item Code: ET-11693

                                  Polarimeters

                                  Item code: ET-11684

                                  Suitable for determining specific rotation of optically active substances. It has Laurent's quartz half-shade device which makes the system sufficiently accurate and at the same time simple, suitable for use with sodium light. The circular head is attached near to the analyser.Vernier movable over the scale enables reading upto 0.1°. A 200 mm tube is provided with the instrument. Mounted on a sturdy tripod stand, adjustable for height.

                                  Additional Information:
                                  • Item Code: ET-11684

                                  Research Polarimeter

                                  Item code: ET-12026

                                  Specification:

                                  Range of measurement : +130° to –30°
                                  Vernier Accuracy : 0.1°(I.S.S.)
                                  Telescopic Magnification :4.5x
                                  Least Count :0.05º
                                  Analyser :Glans Thompson Prisms
                                  Polariser and Half shade :Prism System
                                  Polarising Aperture :6 mm
                                  Light Source :Arrangement for 35Watt Sodium Vapour Lamp Light Source Input
                                  Tube :Borosil Glass Tube 400mm cut type 220V+10% VAC
                                  Cabinet :Plywood Storage Cabinet

                                  Additional Information:
                                  • Item Code: ET-12026

                                  Polarimeter Senior

                                  Item code: ET-11685

                                  Designed to accept observation tube upto 220 mm length. Its improved rotating half shadow system at the front ensures perfect focus and clear definition. With angular glass scale 0-360°, divided into degrees and reading upto 0.05° with micrometer. A sugar scale from 30° to 120° reads upto 0.1 sugar degree. Supplied complete with two polarimeter tubes, 100 mm and 200 mm and dust cover.

                                  Additional Information:
                                  • Item Code: ET-11685

                                  Leak Test Apparatus

                                  Item code: ET-12034

                                  It's the most ideal ‘LEAK TEST' instrument for checking Blister Packs and Strips. It makes the conventional dessicator with a huge vacuum pump, obsolete. The German make Vacuum Pump ensures that a high level of vacuum is created in the shortest possible time. And the die - pressed. Polycarbonate vacuum dessicator sustains the vacuum for a long time.
                                  A vacuum gauge is provided to indicate the vacuum level. This connected to the isolation valve which helps disconnect the source, thereby avoiding the need for running the vacuum pump continuously. While it's amazing compactness saves valuable space in process laboratories, a 0 – 5 minute timer helps the operator attend to other chores at a time.

                                   

                                  Features:
                                  • Extremely Compact Construction
                                  • Long Lasting, German Make Vacuum Pump
                                  • Polycarbonate Vacuum Dessicator
                                  • Stainless Steel (GMP) Construction
                                  • Vacuum Level Upto 22” of Hg


                                  SPECIFICATIONS:-

                                  Dessicator Diameter

                                  250 mm(10")300 mm (12")
                                  Rating
                                  5A 230V Single Phase5A 230V Single Phase
                                  Vacuum Level
                                  22” Hg22” Hg
                                  Timer
                                  5 minute ( mechanical )5 minute ( mechanical )
                                  Dessicator
                                  PolycarbonatePolycarbonate
                                  Body
                                  Stainless SteelStainless Steel
                                  Actual Size (Inches)14” (W) x 9” (D) x 10” (H)22” (W) x 17” (D) x 19” (H)

                                  NOTE : ANY NON STANDARD SIZES, WE CAN MANUFACTURE.


                                  Additional Information:
                                  • Item Code: ET-12034

                                  Bulk Density Apparatus

                                  Item code: ET-12038

                                  Bulk density apparatus digital automatic tap density test apparatus is designed to meet the requirements of usp standards it can hold two cylinders, capacity 100 ml. The mechanism provides simultaneously rotating and tapping motion to the cylinders for packing the sample under test evenly and uniformly together.

                                  The user has to select the no. Of stokes in the counter & after selecting just press start, it will start the stokes & the display shows the no. Of strokes.

                                  Additional Information:
                                  • Item Code: ET-12038

                                  Digital Dissolution Test Apparatus

                                  Item code: ET-12036

                                  The digital dissulation rate test appratus is designed & manufactured for pharmaceutical industry in quality control & r & d to determine compliance with the dissolution requirements of the tablet & capsule as per usp/bp/ip standard. The unit is equipped with digital setting of rpm which can be controlled from 25 to 150 rpm. The digital temp. Controller/indicator is normally set at 37ºc with digital display. It can be adjusted for other setting with an accuracy of better than ± 0. 5ºc. The acrylic water bath is duly fitted with pump which recirculates the water thus maintaining homogeneous temperature. The digital timer can be set ranging from 1 to 999 minutes add it "beeps" at the end of the set time. The equipment is duly fitted with motorized lifting to facilitate easy operation of the stirrers assembly.

                                  Salient features:
                                  Speed controltemp. Indicator/controller
                                  Speed range:25-150 rpm temp. Range
                                  30ºc to 50ºc
                                  Display:3 digit led
                                  Display:3 digit led
                                  Accuracy:± 1rpm
                                  Accuracy:± 0. 5ºc
                                  Resolution:0. 1ºc
                                  Sensor:rtd


                                  Digital timer/alarmwater bath size:

                                  Display:3 digit led 900mm(w)x200mm(d)x200mm(h) made of 10mm thick crylic
                                  Setting range:1 to 999 minutes,in steps of 1 min
                                  Accuracy:± 0. 1% power
                                  Mode/setting:"finger-tip" 220v 50hz 1. 0 kw
                                  Alarm:peizo beeper
                                  Heater:500 watts


                                  Additional Information:
                                  • Item Code: ET-12036

                                  Disintegration Test Machine

                                  Item code: ET-12035
                                  Disintegration Test Machine is electrically operated. Used to find out disintegration of tablets. The machine complies with specifications as per Indian pharmacopoeia 1985:-

                                  • With single basket
                                  • With double basket

                                  Additional Information:
                                  • Item Code: ET-12035

                                  Tablet Friability Test Apparatus (Single Drum)

                                  Item code: ET-12037

                                  The apparatus is designed to determine the abrasion rate and impact hardness of tablets. Two transparent acrylic drums rotated by superior quality constant speed sturdy motor, mounted in painted sheet metal cabinet with chemical resistant epoxy coating.


                                  Special feature: Realistic abrasion rate is obtained by pre-set revolutions through LED as compared to time setting, where voltage fluctuation may change number of revolution in pre-set time.


                                  Specifications:

                                  Drim Diameter:

                                  285mm

                                  Tablet Fall Distance:

                                  140mm

                                  Drive:

                                  1/8 HP

                                  Power Phase:

                                  AC/230 volt Single


                                  Additional Information:
                                  • Item Code: ET-12037

                                  Tablet Hardness Tester (Pfizer Type)

                                  Item code: ET-11916 

                                  Complete with dial guage. Powder coated machine parts. Useful to take quick readings on dial, more accurate in grammes. All contact parts made of Stainless steel 0 - 20 Kg

                                    Additional Information:
                                    • Item Code: ET-11916

                                    Ultrasonic Baths Sonicator

                                    Principle of Ultrasonic Cleaning:
                                    Item code: ET-12042

                                    Ultrasonics (Ultrasound) is the sound which human beings cannot hear. Ultrasound utilizes frequencies from and above 18khz (18,000 cycles per sound) High frequency electrical energy is converted into ultrasound waves by means of ultrasonic Transducers, which are bonded on the base of S. Cleaning Tank. These high frequency sound waves create in the liquid countless, Microscopic vacuum Bubbles which rapidly expand and collapse. This phenomenon is CAVITATION. These bubbles act like miniature high speed brushes, driving the liquid in to all openings and minute recesses of the Object immersed in the liquid. Intense scrubbing of Cavitation cleans away all the dirt and soil from the object immersed and the object is perfectly cleaned. Intricate objects can be cleaned with either complete or little Dismantling.



                                    Applications:

                                     

                                    Laboratory: For Glassware, Filter, Cleaning and HPLC Mobile, Phase Degassing

                                     

                                    Industrial: Printed Circuit Boards, Semi-Conductors, Electronic Components, Precious Parts and Mechanisms

                                     

                                    Medical: Dental and Surgical Instruments

                                     

                                    Optical: Spectacles, Spectacle Frames, Lenses

                                     

                                    Jewellery: For all kinds of Jewellery, Precious Stones etc.

                                     

                                    TO REMOVE: Dust, Oils, Greases, Polishing Compound, Waxes, Swarf, Stains, Soils and any other Contaminants.


                                    Silent Features :

                                    • Easy to operates & maintain with one piece S.S. Tank
                                    • Indigenously manufactured with advanced MOSFET technology with Auto-tuning facility
                                    • Digital Tuning of Transducers with Generators to avoid any frequency shifted even during demanding applications
                                    • Compact, rugged and highly durable systems
                                    • Extensively protected electronic circuits means longer and safer Operations


                                    Technical Specifications:

                                    • Operating frequency 33+-3KHz, for all general purpose cleaning is highly recommended
                                    • Input Voltage range of 170V AC- 270V AC, 50 Hz, 1 Ph
                                    • Micro Controller based timer range 0 to 30/99 minutes
                                    • Thermostatic controlled temperature controller
                                    • Other capacity other than mentioned are also available as per customer requirement


                                    MODELS AVAILABLE :

                                    • 1.0 Litre to 9 Litres
                                    • Heater Optional
                                    • Body S.S. or M.S. Powder Coated
                                    CapacityTank size
                                    (LxBxH)mm
                                    Over all Dimension
                                    (LxBxH)mm
                                    Wattage
                                    1.5 Lit.
                                    240 x 135 x 65265 x 160 x 18060W
                                    3.5 Lit.
                                    300 x 150 x100330 x 175 x 250120W
                                    6.5 Lit.
                                    300 x 150 x150450 x 200 x 350200W
                                    9 Lit.300 x 200 x150450 x 300 x 370250W

                                    Additional Information:
                                    • Item Code: ET-12042

                                    Bomb Calorimeters

                                    Item code: ET-12043

                                    Bomb Calorimeter Outfit provide a simple and inexpensive method for determination of heat of combustion of organic matter and the calorific value & sulphur content of solid & liquid fuel. The outfit supplied is complete for analysis as per the method recommended by British Standard Institution BS 1016. All parts of the outfit have been finished and tested according to the specification laid down by Institute of petroleum and British Standard Institute. It comes with all essential accessories like, Bomb, Calorimeter vessel with bomb support, water jacket, stirrer, electronic firing unit with digital backman thermometer etc.

                                    Testing of Bomb:
                                    Each Bomb is tested before it leaves the factory in accordance with the requirement of the Institute of Petroleum (I.P. 12/63 T.Appendix 1) and a works certificate is issued with each Bomb. This certificate gives the results of hydraulic testing under a pressure of 300 atmospheres (4400 p.s.i) maintained for a period of ten minutes without sign of leakage. The maximum deformation must not exceed the specified limits.


                                    Calorimeter Vessel:
                                    The vessel is made of copper and is Chromium plated or S.S. It includes a Bomb support that ensures proper positioning of Bomb in the vessel.


                                    Water Jacket:
                                    The outer container of Jacket is made of copper and is chromium plated both inside and outside or S.S. The is closed by an ebonite cover. A terminal block is fitted to the of the container so that connection can be made from the firing control.


                                    Offset Stirrer:
                                    The stirring mechanism supplied gives sufficient turbulence for effective stirring whilst no heat is imparted to the calorimeter water. It consists of an impeller stirrer driven at a constant speed of approximately 800 r.p.m. The offset arrangement whereby the motor drives the impeller via a belt precludes any possibility of heat transference between motor and calorimeter Vessel Contents.


                                    Electronic Firing Unit with Digital Backman Thermometer:
                                    For firing a calorimeter Bomb AC supply main (230 Volts 50 Cycles). It consists of two parts Viz Electrical Box and Electronic Box for Digital Thermometer reading. The Electrical Box is provided with socket for stirrer and terminals for the fuse wire. The unit has provision for test of firing wire resistance or open circuit. A left hand side bulb indicate the continuity while right hand side bulb indicates the open circuit (firing).


                                    Crucible:
                                    Various types of crucible are available the standard supplied with the outfit being a stainless steel crucible of 8 ml capacity which fits in the standard support ring provided with the outfit.


                                    Additional Information:
                                    • Item Code: ET-12043

                                    Bursting Strength Testers

                                    Item code: ET-12048

                                    Bursting strength tester the equipment is used for accurate measurement of bursting strength of paper, paper boards, corrugated boards, solid fibre board, filter cloth/ industrial fabric etc and
                                    double head modeltwin diaphragm test head for test paper and board respectively:

                                    • Fully enclosed model
                                    • Bursting strength displayed on flat angled gauges for greater accuracy
                                    • Accurate, reliable and trouble free equipment
                                    • Change over from one head to the other by a simple switch
                                    • Also available in various other specifications to test paper, paper board, corrugated board, solid fibre board, filter cloth / industrial fabric etc.


                                    Additional Information:
                                    • Item Code: ET-12048

                                    Micro Digital Model

                                    Micro Digital Model

                                    Item code: ET-12049

                                    Single push button operation activates an automatic test cycle, determining rapidly the bursting strength of paper or board:

                                    • Fully enclosed body.
                                    • Two units of measurement (Kg/cm2 & PSI).
                                    • Adjustable clamping pressure.
                                    • Auto Calibration in 5 simple steps.
                                    • Overload protection (Preset).
                                    • Test result remains frozen till next operation.
                                    • Changeable peak detection level for different materials.

                                    Additional Information:
                                    • Item Code: ET-12049

                                    Micro Print Model (Fully Automatic Micro Processor Based)

                                    Item code: ET-12050

                                    One button operation On start the machine clamps the test sample, starts the test, performs testing, display's for the next test. It completes a lot test of 12 readings which are displayed in ascending order. A detailed print product name, code, etc. to print on the graph. The graph display's all test results, mean and average reading, accept/ reject status and graphical representation of the test:
                                    • Preset peak mode for different test material.
                                    • Auto calibration in two easy steps.
                                    • Display of reading in kg/cm2 and lbs/in2.
                                    • Available in various measuring capacity.
                                    • Machine available in various specifications to test.
                                    Paper Paper Board, Corrugated Board,Solid Fibre board, Filter Cloth/ Industrial Fabric etc.

                                    Additional Information:
                                    • Item Code: ET-12050

                                    Standard Model

                                    Item code: ET-12046

                                    Simple construction, open type, body mounted pressure gauges and panel mounted operating switches:

                                    • Two units of measurement (Kg/cm2 & PSI)
                                    • Single push button cycle.
                                    • Dual gauges for greater accuracy.
                                    • Lazy hand (maximum pointer) for maximum burst reading.
                                    • Heavy duty industrial Bourdon pressure gauges for greater durability.
                                    • Switches from one gauge to another by opening and closing of SS valves.

                                    Additional Information:
                                    • Item Code: ET-12046

                                    Super Model

                                    Item code: ET-12047

                                    Fully enclosed model:

                                    • Bursting Strength displayed on flat angled gauges for greater accuracy.
                                    • Accurate, reliable and trouble free equipment.
                                    • Available with single or two pressure gauges.
                                    • Change over from one gauge to the other by a simple switch.
                                    • Machine available in various specifications to test Paper, Paper Board, Corrugated Board, Solid Fibre board, Filter Cloth Industrial Fabric etc.

                                    Additional Information:
                                    • Item Code: ET-12047

                                    Antibiotic Zone Readers

                                    Antibiotic Zone Reader :
                                    Item code: ET-12051

                                    The Antibiotic zone reader provides a rapid accurate method for determining the strength of antibiotic materials by measuring the diameter of an inhibited zone in petri dish.

                                    This zone reader measures the diameter of the inhibited zone to0.02mm with the range of 0 to 35mm. It works on 220V AC 50Hz.

                                    Additional Information:
                                    • Item Code: ET-12051

                                    Electronic Balances

                                    Item code: ET-12053
                                    Salient Features:

                                     

                                    • For accurate and quick reading, digital weight indication with large and clear figures.
                                    • High weighing accuracy and very short response time.
                                    • Non-Magnetic build in type weights working on drop weight system.
                                    • Clear vision of lit scale window, consecutive figures above and below the actual value are also visualised through transparant shade.
                                    • Master zero arrester for setting the loaded machine to zero reading.
                                    • Sliding side glass doors and fixed glass front of weighting chamber.
                                    • Electric cum battery operated machine with in-built battery and charger.

                                     


                                    Technical Data:

                                    Beam:

                                    Special alloy metal

                                    Edges & Plains:

                                    Fine opti

                                    Damping:

                                    Purified air.

                                    Weights:

                                    Non-magnetic built in type.

                                    Pan:

                                    Stainless Steel.

                                    Pan Height:

                                    205mm. Weighing Chamber

                                    (LBH):

                                    175x220x230mm

                                    Housing:

                                    Aluminum Housing Dimension

                                    (LBH):

                                    380x230x450mm

                                    Voltage:

                                    220/230V A.C. mains

                                    Weight:

                                    13 Kgs


                                    Additional Information:
                                    • Item Code: ET-12053

                                    Professional Line Analytical Balances Cy Series

                                    Item code: ET-12055

                                    OPTICS TECHNOLOGY
                                    : Basic Analytical Balance gives you reliable weighing technology, speed, stability and high quality craftsmanship with excellent price/performance in real compact package.


                                    OPTICS TECHNOLOGY(INDIA): Basic Analytical Balance comes with all the intelligent, capabilities you need for daily routine application in the lab and does it all reliably and precisely:

                                    • Net-total formulation
                                    • Piece Counting
                                    • Weighing in Percent %
                                    • Animals Weighing
                                    • Toggling between any two units

                                     

                                    Latest DLS monolithic systems is more than one step ahead of the competition, offers:

                                     

                                    • Less movable parts
                                    • Fast response time & better stability
                                    • Excellent Metrological Specification
                                    • Better protection against transportation and temperature drift

                                     


                                    STANDARD FEATURES:


                                    • High-Contrast, Large, easy to read liquid crystal display
                                    • Sealed, easy to clean keypad with large sized keys
                                    • User selectable stability and filter levels
                                    • Compact housing featuring and new space age design
                                    • Integrated overloaded protection
                                    • Easy access, all grass draft shield with doors that slid open effortlessly and quietly
                                    • Optional RS 232C Interface available to plug in a PC for data collection or printer or remote display
                                    • Conforms to GLP, GMP and ISO9000 standards

                                     

                                     

                                    MODELCY 204CY 104CY 64
                                    CAPACITY210 g120 g60 g
                                    READABILITY0.1 mg0.1 mg0.1 mg
                                    REPEATABILITY+0.1 mg+ 0.1 mg+ 0.1 mg
                                    LINEARITY+0.2 mg+0.2 mg+ 0.2 mg
                                    PAN SIZE (MM)80 ø
                                    RESPONSE TIME2 Sec
                                    OPERATING TEMPERATURE0oto 45o C
                                    HOUSING DIMENSION200 X 270 X 300 mm
                                    POWER SUPPLY A/C ADAPTER, 230 V + 20% 50-60 Hz
                                    UNITS AVAILABLEg,mg,ct,lb,Oz,Ozt,tls,tlt,tlh,GN,dwt,tic,mom,K,tola,baht,MS

                                    Additional Information:
                                    • Item Code: ET-12055

                                    Professional Line Analytical Balances CX Series

                                    Optics technology(India):
                                    Item code: ET-12054

                                    offers exactly right performance and convenient features that you need to accomplish the most sophisticated weighing tasks.


                                    On optics technology( India): you can weigh just about anything from really light weight samples to heavy weight objects. And if you want to do more than "basic weighing" the 5 application programs will let you easily perform the following:

                                     

                                    • Differential weighing with net-gross formulation
                                    • Piece counting
                                    • Percent weighing
                                    • Averaging to weigh live animals
                                    • Toggling between any two units

                                     

                                     

                                    21st century high speed milling technology let us invent, latest monolithic systems with versatile advantages of perfect weighing system:

                                     

                                    • Excellent meteorological specification
                                    • Better protection against transportation & temperature drift
                                    • Fast response time & better stability


                                    Standard Features:

                                     

                                    • High-contrast, large, easy to read liquid crystal display
                                    • Splash proof & dust protected shell in compliance with ip54
                                    • Motorized calibration with built in weigh to obtain optimum result
                                    • Standard bi-directional rs232 interface allows you to plug in to pc or printer for data collection
                                    • Hanger for weighing below the balance
                                    • Minimal space requirement despite the spacious draft shield interior
                                    • Excellent wind protection, ensuring the best results in ambient environment
                                    • Integrated overloaded protection
                                    • User selectable stability and filter levels
                                    • Conforms to glp, gmp and iso9000 standards

                                     

                                     

                                    modelcx 265cx 301cx 220cx 120cx 65
                                    capacity60/210 g301 g220 g120 g65 g
                                    readability0. 01/0. 1 mg0. 1 mg0. 1 mg0. 1 mg0. 1 mg
                                    repeatability+0. 02/0. 1 mg+ 0. 1 mg+ 0. 1 mg+ 0. 1 mg+ 0. 1 mg
                                    linearity+0. 03/0. 2 mg0. 2 mg+ 0. 2 mg+ 0. 2 mg+ 0. 2 mg
                                    Pan size (mm)80 æ
                                    Response time3 sec2 sec
                                    Operating temperature00 to 450 c
                                    Housing dimension210 x 290 x 310 mm
                                    Weight approx6. 6 kg5. 3 kg
                                    Power supplya/c adapter , 230 v + 20% 50-60 hz
                                    Units availableg,mg,ct,lb,oz,ozt,tls,gn,dwt,tic,mom,k,tola,baht,ms

                                    Additional Information:
                                    • Item Code: ET-12054

                                    Stainless Steel Body Pass Box

                                    Item code: ET-12058

                                    Pass box (stainless steel body) the pass box is an equipment normally installed on the wall between the clean room and any other room. It is used for transfer of material from and into the clean room, without contaminating the air of clean room and without having to open room door. This is achieved with the help of interlocking type doors of pass box.

                                    Principal of working:

                                    This equipment is installed on the wall between the clean room and the other room. The pass box has two doors at its extreme ends. One door opens in the clean room and other door open in the other room. These doors are electrically interlocked type so that any other door can be operated at a time. This avoids direct flow of air from the clean room to the other room or vice versa. This also avoid the need to open the clean room door frequently for transferring of material from & into the clean room. Thus, it helps in achieving the aim of material transfer without disturbing the cleanliness level of the clean room.

                                    Construction:

                                    It is made of commercial board and all its external & internal surfaces are dully laminated. L. M. S. Or s. S. Sheet body also can be supplied optionally. Each hinged door has wide glass viewing window, through which material kept in the pass box can be seen. These doors are electrically interlocked type so any one door can be opened at a time. U. V. & fluorescent light and hepa filter can be provided optionally.

                                    Available size:

                                    24"(w) x 24" (h) x 24" (d)
                                    Other sizes on request.


                                    Additional Information:
                                    • Item Code: ET-12058

                                    Laboratory Microbiological Blenders

                                    Item code: ET-12059

                                    Rating:
                                    220 volts - 50 cycles - single phase - ac only - 14000 - 18000 rpm approx.

                                    Motor: Universal

                                    Watts:
                                    450 Watts (2 amp.)

                                    Timer:
                                    selective timer cycle from 0. 1 to 5 minutes for automatic blending or manual control setting for continuous running.

                                    Base:
                                    Aluminum cast - baked enamel finish.

                                    Container: Stainless steel jar with s. S. Blades & s. S. Cap / Plastic Cap.

                                    Optional: 500ml or 50-100 ml containers of stainless steel.

                                    Capacity:
                                    (a) 250ml. (b) 500 ml. (c) 1000ml.

                                    Additional Information:
                                    • Item Code: ET-12059

                                    Chemical Bottle Storage Cabinets

                                    Item code: ET-12060 

                                    Bottle / chemical storage cabinet these specially designed cabinets provide a wash of sterile filtered, clean air through hepa filters having an efficiency of 99. 97% down to 0. 3 micron particle size. This cabinet protects dust and other particulates on bottles and chemicals. For use in the laboratory for chemical storage. Self standing cabinet provides down flow clean air in the cabinet.

                                    Features:
                                    Large interior capacity for handling various sizes bottles / chemicals. Wire mesh trays are provided in the chamber so that all the air will be fully recirculated. Low power consumption suitable for operation on single phase supply. Inside body is made of stainless steel & the outer body is made of mild steel duly powder coated.

                                    Working area size:

                                    • (l x b x h) 2' x 2' x 2'
                                    • 2' x 2' x 3'
                                    • 2' x 2' x 4'
                                    • 2' x 2' x 6'
                                    • 3' x 2' x 2'
                                    • 3' x 2' x 3'
                                    • 3' x 2' x 4'
                                    • 3' x 2' x 6

                                    Additional Information:
                                    • Item Code: ET-12060

                                    Willey Mill

                                    Item code: ET-12063 

                                    Intermediate model "Arthur thomas" type electrically operated to work on 220 volts A. C recommended for grinding of dry plant samples.
                                    Also for a great variety of commercial dry materials. Unit having two stationary steel blades and rotary with steel edges provided in the cast iron chamber. Willey mill is fitted on substantial cast iron base.


                                    Working chamber:

                                    (a) 40 mm x 20mm
                                    (b) 65 mm x 25mm
                                    (c)100 mm x 50mm

                                    Additional Information:
                                    • Item Code: ET-12063

                                    Glass Beads Sterilizers

                                    Item code: ET-12065

                                    This is a special design having three container systems providing an effective thermal insulation. Thus maintaining the outer cover cool while keeping an even temperature inside the well. The heat loss is very low thus leading to very low power consumption.

                                    Overall Size (Ø' * h )

                                    15 * 19.6 cm.

                                    Power Consumption

                                    100 watt 220 v / 50 hz

                                    Well Dimension (Ø' * h)

                                    5 * 8 cm.

                                    Weigh

                                    1.850 Kg.

                                    Working Temperature

                                    240ºC

                                    Application - Laboratories, Dental Clinic & College.

                                    The scientific method for total sterilization of your instruments witihin 5 to 15 seconds. These are compact, state of art, steamless and non hazardous equipments for your clinic. A simple device for quick sterilization of small instruments with effective thermal sterilization. In this the clear glass beads are used in the well. The temperature of the glass beads is at 240ºC. The instruments are dip in the glass beads of quick sterilization. After switiching on the device in approximately 20 minutes the device will reach proper temperature. The red light will be switched on to confirm that the temperature within the well has reached the required level. The green light will be off and on indicating whether the heater is working or not to maintain the temperature of glass beads in the well.


                                    Additional Information:
                                    • Item Code: ET-12065

                                    Polishing Machines

                                    Item code: ET-12067

                                    Polishing machines are used for preparing metallographic specimens & petrographic from pregrinding to smooth surface finish for microstructure examination. The machine is basically of motor driven disc type to provide stepless variable speed from 400 to 1100 RPM approx. The driven is provided by suitable H.P. single phase 220V A.C. Motor. The brass ped steel disc of 8" or 10" dia (easily replaceable).

                                    Additional Information:
                                    • Item Code: ET-12067

                                    Polishing Machine (Single Disc)

                                    Item code: ET-12066

                                    Polishing machines are used for preparing metallo graphic specimens & petrographic from peregrinating to smooth surface finish for micro structure examination. The machine is basically of motor driven disc type to provide step less variable speed from 400 to 1100 RPM approx. The driven is provided by suitable H.P. single phase 220V A.C. Motor. The brass ped steel disc of 8" or 10" dia (easily replaceable).

                                    Additional Information:
                                    • Item Code: ET-12066

                                    Ozone Air Sterilizers

                                    Item code: ET-12070 

                                    Ozone is the most efficient natural board spectrum microbiological control substance and very reactive Disinfecting agent. It destroys Bacteria, Viruses and Cysts in a very short duration, when it comes in contact with any media i.e. water, air or any food item. Ozone is considered by most to be the best available technology and a better alternative than using chemicals. The concentration of O3 is higher or inhaled for longer duration. As per OSHA and other controlling agencies O3 concentration should not exceed:
                                    • 0.1 ppm (0.2mg/M3): 8 hours or more / day
                                    • 0.3 ppm (0.6mg/M3): Maximum 10 minutes

                                    Ozone is very effective in reducing Bacterial load from environment and product itself. Ozone drastically increases shelf life of product and thus the products will remain fresh for longer duration.

                                    Monitoring the concentration of Ozone in Air & dissolution in water is essential for control of disinfection. We manufactures equipment for monitoring & controlling Ozone in Air & Water. Monitoring system are equipped with low & high level alarms and can be integrated with process equipment if required.

                                    Model

                                    Nominal Rating
                                    mg/hr ozone

                                    Room
                                    Volume
                                    (In Ft3)

                                    Air Flow
                                    (4-5 hrs.)
                                    CFM

                                    Power (W)

                                    Dimensions
                                    HXBXW
                                    (In mm)

                                    Weight
                                    (Kgs)

                                    TI-0.25

                                    250

                                    1500

                                    105

                                    40

                                    180 x 150 x 260

                                    2.0

                                    TI-0.50

                                    500

                                    3000

                                    105

                                    80

                                    280 x 240 x 350

                                    3.0

                                    TI-0.75

                                    750

                                    4500

                                    310

                                    100

                                    240 x 150 x 350

                                    4.5


                                    Additional Information:
                                    • Item Code: ET-12070

                                    Ozone Room Sterlizer

                                    Item code: ET-12069

                                    Ozone is the most efficient natural board spectrum microbiological control substance and very reactive Disinfecting agent. It destroys Bacteria, Viruses and Cysts in a very short duration, when it comes in contact with any media i.e. water, air or any food item. Ozone is considered by most to be the best available technology and a better alternative than using chemicals. The concentration of O3 is higher or inhaled for longer duration. As per OSHA and other controlling agencies O3 concentration should not exceed:
                                    • 0.1 ppm (0.2mg/M3): 8 hours or more / day
                                    • 0.3 ppm (0.6mg/M3): Maximum 10 minutes

                                    Ozone is very effective in reducing Bacterial load from environment and product itself. Ozone drastically increases shelf life of product and thus the products will remain fresh for longer duration.

                                    Monitoring the concentration of Ozone in Air & dissolution in water is essential for control of disinfection. We manufactures equipment for monitoring & controlling Ozone in Air & Water. Monitoring system are equipped with low & high level alarms and can be integrated with process equipment if required.

                                    Model

                                    Nominal Rating
                                    mg/hr ozone

                                    Room
                                    Volume
                                    (In Ft3)

                                    Air Flow
                                    (4-5 hrs.)
                                    CFM

                                    Power (W)

                                    Dimensions
                                    HXBXW
                                    (In mm)

                                    Weight
                                    (Kgs)

                                    TI-0.25

                                    250

                                    1500

                                    105

                                    40

                                    180 x 150 x 260

                                    2.0

                                    TI-0.50

                                    500

                                    3000

                                    105

                                    80

                                    280 x 240 x 350

                                    3.0

                                    TI-0.75

                                    750

                                    4500

                                    310

                                    100

                                    240 x 150 x 350

                                    4.5


                                    Additional Information:
                                    • Item Code: ET-12069

                                    Ozone Room Sterlizer

                                    Item code: ET-12068

                                    Ozone is the most efficient natural Board Spectrum Microbiological control substance and very reactive Disinfecting agent. It destroys Bacteria, Viruses and Cysts in a very short duration, when it comes in contact with any media i.e. water, air or any food item. Ozone is considered by most to be the best available technology and a better alternative than using chemicals. The concentration of O3 is higher or inhaled for longer duration. As per OSHA and other controlling agencies O3 concentration should not exceed:
                                    • 0.1 ppm (0.2mg/M3): 8 hours or more / day
                                    • 0.3 ppm (0.6mg/M3): Maximum 10 minutes

                                    Ozone is very effective in reducing Bacterial load from environment and product itself. Ozone drastically increases shelf life of product and thus the products will remain fresh for longer duration.

                                    Monitoring the concentration of Ozone in Air & dissolution in water is essential for control of disinfection. We manufactures equipment for monitoring & controlling Ozone in Air & Water. Monitoring system are equipped with low & high level alarms and can be integrated with process equipment if required.

                                    Model

                                    Nominal Rating
                                    mg/hr ozone

                                    Room
                                    Volume
                                    (In Ft3)

                                    Air Flow
                                    (4-5 hrs.)
                                    CFM

                                    Power (W)

                                    Dimensions
                                    HXBXW
                                    (In mm)

                                    Weight
                                    (Kgs)

                                    TI-0.25

                                    250

                                    1500

                                    105

                                    40

                                    180 x 150 x 260

                                    2.0

                                    TI-0.50

                                    500

                                    3000

                                    105

                                    80

                                    280 x 240 x 350

                                    3.0

                                    TI-0.75

                                    750

                                    4500

                                    310

                                    100

                                    240 x 150 x 350

                                    4.5


                                    Additional Information:
                                    • Item Code: ET-12068

                                    Ozone Room Sterilizer

                                    Ozone Room Sterilizer
                                    Item code: ET-12071

                                    Ozone is the most efficient natural Board Spectrum Microbiological control substance and very reactive Disinfecting agent. It destroys Bacteria, Viruses and Cysts in a very short duration, when it comes in contact with any media i.e. water, air or any food item. Ozone is considered by most, to be the best available technology and a better alternative than using chemicals. The concentration of O3 is higher or inhaled for longer duration. As per OSHA and other controlling agencies O3 concentration should not exceed:
                                    • 0.1 ppm (0.2mg/M3): 8 hours or more / day
                                    • 0.3 ppm (0.6mg/M3): Maximum 10 minutes

                                    Ozone is very effective in reducing Bacterial load from environment and product itself. Ozone drastically increases shelf life of product and thus the products will remain fresh for longer duration.
                                    Monitoring the concentration of Ozone in Air & dissolution in water is essential for control of disinfection. We manufactures equipment for monitoring & controlling Ozone in Air & Water. Monitoring system are equipped with low & high level alarms and can be integrated with process equipment if required.

                                    Model

                                    Nominal Rating
                                    mg/hr ozone

                                    Room
                                    Volume
                                    (In Ft3)

                                    Air Flow
                                    (4-5 hrs.)
                                    CFM

                                    Power (W)

                                    Dimensions
                                    HXBXW
                                    (In mm)

                                    Weight
                                    (Kgs)

                                    TI-0.25

                                    250

                                    1500

                                    105

                                    40

                                    180 x 150 x 260

                                    2.0

                                    TI-0.50

                                    500

                                    3000

                                    105

                                    80

                                    280 x 240 x 350

                                    3.0

                                    TI-0.75

                                    750

                                    4500

                                    310

                                    100

                                    240 x 150 x 350

                                    4.5


                                    Additional Information:
                                    • Item Code: ET-12071

                                    Jar Test Appartus

                                    Item code: ET-11955

                                    Stirring capacity:

                                    • For two stirrers
                                    • For four stirrers
                                    • For six stirrers

                                    Special arrangements:
                                    Digital timer & R. P. M counter. High speed jar test apparatus 10-200 R. P. M

                                    Additional Information:
                                    • Item Code: ET-11955
                                    Looking for Laboratory Instrument ?
                                    © Edutek Instrumentation
                                     
                                    Desktop Site Back to top